@@williamcll Plan B didn't have as much stuff sticking out as the Full Armor; all the MG Unicorns are a brick nonetheless, I have the Phenex just standing around because I can't be assed to pose it xD
I recently built this kit and I find that attaching the the stand to the hollow square area underneath the Aile Striker Jet Pack holds it up better than underneath the hips. Very nice end product - just wish the RG Inner frame was more solid like the RG Force Impulse
Did you know that we're getting another manga called Mobile War History Gundam Burai? It's basically Gundams in the Warring States Era, on Earth. Best of all, it ain't SD. Maybe we'll get a kit again like in Moon Gundam?
As a straight builder, I just hope the Strike will get a new mold in the RG line, cause I love the design but don't want the MG or PG cause they cost a lot and are too big for my tastes ( I need to think for my shelves )
Out of the box, mine is fairly solid really. Tinkered with it on a bunch of poses and didn't have anything fall off. In truth, my only difficulty with the kit was the ordering process through Bluefin as I picked this up with the RG Tallgeese 3, and they 'forgot' to send this kit out at release because of release dates between the two kits. So they labeled my order complete and tried to tell me I didn't have a RG Perfect Strike coming. XD
they did, theres a shanghai gundam base limited ver of the perfect strike, they added stuff to the joints for better stability, just like how they did for the shanghai freedom RG
@@Sazabi4prez The PG Millennium Falcon was 1:72, and the PG Eva 01 was somewhere between 1:114 and 1:271 scale depending on how tall the Evangalion was (somewhere between 40m or 95m tall). Sorry but, if you are going to get pedantic check your facts first or clearly specify what you mean, all PG Gundam to date may have been 1:60 but not all PG kits.
Forgot to mention that this version can at least stay upright with the aile striker on since the little place holder in the waist prevents it from flopping backwards like the normal Aile Striker; so its at least got that going for it.
Re: Loose Joints on old RG Inner Frames Saw a video of a builder placing cut-outs of the plastic holding the runners in between ball joints. Wondering if anyone has had any luck with this method? Also, thanks @MechaGaikotsu for the tip on using paint/nail polish to tighten up joints. Might use paint on the non-ball joint areas that fold (e.g. knees and elbows)
After seeing the ‘bored of gunpla’ video and this back to back...l decided to buy an RG aile strike. The hobby store owner also recommend me this kit over RG exia soo this will be my first visit to floppy town. But i am sure it is excitement embodied xD
I ended up here looking for Skygrasper reviews while on a quest to build all RGs, yes even the Zeta (already built) and Sinanju 😅😅😅 (scared to get til last)
I have the regular RG Aile Strike and RG Skygrasper. Can confirm that neither of them came with a stand. And those holding hands did come with the Skygrasper.
After building the absolute hand grenade that is the RG Build Strike, I can't imagine having all that extra crap loaded on it. o.O Looks awesome on the shelf if it makes it there in one piece though!
If you get the revived HG Aile Strike, you can take the parts from the old Perfect Strike and slap em on the revive Strike for a revamped Perfect Strike
Mine was bad at holding anything. Including the basic shield and rifle. I put it in a pose that looked cool, glued a few parts, and have left it alone on my shelf.
I built the rg aile strike& the rg skygrasper about 2 years ago and it hasnt aged well at all. Im gonna just pass on this. The only thing i dont have is the updated striker pack with the 4 extra energy racks....but good review broham. Always keep up the amazing work!!!
This videos couldn't come in a better time for me. I wanted to buy the RG Strike but I tought the Perfect Strike was just an set of accessories without the gundam itself, like the Nu Gundam Funnels. Now I know I can just buy the Perfect Strike.
I do appreciate your warning, even though i just finished mine on the day you released the MG Barbatos review. The action base adapter is an absolute garbage. I think the best way to deal with it is just glue it right away. You can never pose it with out the action base anyway (unless of course, if you glue the feet to some flat surface). As for the weapons, I gave up on posing the luncher with the proper hand grab at the handle since the first day. Now I just put the hand somewhere behind the luncher to make it looks like the Strike is grabing it. Worst of all the waepon is that they choose to go with the foldable peg on almost everything. The joint of this peg is so loosy that even you push the peg right into the hand, the weapon will just become loose and wobbly. The beam boomerang is another nightmare. The grip mechanic is that the have a T-shape peg on the grip hands and you need to put the tiny cut on the handle into it to make it fit. The peg is so small that it is for me I think it is impossible to hold it firmly in the hands. The soulder joint is, I guess, is a RG syndrome. I put the hand gun on and raise it up at 45 degree angle, 5 hours later it drop parallel to the table. I got it just because it looks so badass when it was release, which I am in my first month into Gunpla. It has been on my list since then.
Took a chance, went ahead and picked one of these up. Mainly because I like the strike, and I also snapped together a couple of the older RG kits over the last 3-4 weeks, and they really didn’t seem as bad as I expected them to be (for now at least, I’m sure they’ll be loosening up any day now); so since the Strike, Destiny, and Justice are three of my favorite ms designs I figured I’d take a chance on the RG kits for them.
I have been waiting for a model kit that was supposed to come on the 15th of January, yet I feel so impatient. One my orders through Amazon that I bought before christmas came to my house first and that was a choro-q pull back car. The one kit that hasn't come to my house yet is an HG Banshee Norn.
Its just sad that it tookso long to get an rg perfect strike released for it to be literally just a repack of the sky grasper with a slightly different aile pack. Here's to hoping the hgce perfect strike wont be like this :3
btw, just built both the skygrasper and the aile strike RG and from my understanding the only difference (apart from the base) is the 2 nobs connecting the weapons to the backpack (and the extension battery) any chance to build/buy/replace those to achieve the perfect strike status? I know it is minimal (no prob for the sword, but the gun would be cool to use the extension arm) but still interested for the sake of a good pose :P
Schwert Gewehr Anti-ship Sword Panzer Eisen Rocket Anchor Midas Messer Beam Boomerang Agni 320mm Hyper Impulse Beam Cannon welp cant help it because he only said the real name of the Switchblades
I wish they should fix the RG solidness joints of the arms and waist of the inner-frame when it comes to bulk-heavy accessories. Regardless, it's a nice full-package.
The newer rg kits are much more solid since they don't have a preassembled inner frame. I have a few real grades and the later ones are much better kits by far.
Are you going to review the MG perfect strike? Also are you going to build the gundam unit 4 in commemoration of the HG gundam coming out? Also also, review that MG 00 gundam in the pile
almost, all the parts are there apart from the aile striker backpack which is a bit different (the tail and the extra nobs to attach the sword and the launcher)
I purchased the RG Skygrasper about one week before this kit was announced, I was slightly annoyed but then realized it was P-Bandai so I wouldn't get it anyway.
There’s also another option that I have... I bought the regular MG Aile Strike RM and then bought the Premium Bandai accessories for it... so there you can get it less expensive than the one with titanium finish 👌
well it is a lot cheaper getting the 2 separated, at least here in italy, I paid 53 euros for both RG kits, amazon lists the p-bandai at 103 euros, so basically double the price of both RGs for just a revamped aile striker backpack, definitely not worth it
@@Gunpla_shrimp I do know that. I think I typed this in on the wrong video or something becouse I cant cant remember what or why I'd put titanium near a strike kit
"There's too many accessories"
*did review of FA unicorn*
hmmm
Mr Spacebar To be fair, RG Unicorn is a solid kit. RG Strike is way outdated to handle the amount of weapons.
You haven't seen the MG unicorn plan B
@@williamcll I want the RG version. MG Unicorn is also outdated.
@@misora25chan it's not outdated, it sucked at launch
@@williamcll Plan B didn't have as much stuff sticking out as the Full Armor; all the MG Unicorns are a brick nonetheless, I have the Phenex just standing around because I can't be assed to pose it xD
I recently built this kit and I find that attaching the the stand to the hollow square area underneath the Aile Striker Jet Pack holds it up better than underneath the hips. Very nice end product - just wish the RG Inner frame was more solid like the RG Force Impulse
Did you know that we're getting another manga called Mobile War History Gundam Burai? It's basically Gundams in the Warring States Era, on Earth. Best of all, it ain't SD. Maybe we'll get a kit again like in Moon Gundam?
I saw some images, looks like feudal Japan to me just because the samurai themed Gundam
Warring states era Gundam... in japan... well, Another ASTRAY Variant incoming
>perfect strike condom
God I really really love automated CC
As a straight builder, I just hope the Strike will get a new mold in the RG line, cause I love the design but don't want the MG or PG cause they cost a lot and are too big for my tastes ( I need to think for my shelves )
"Huge Amount of Accessories"
*Laughs in HG Thunderbolt Zaku*
Lol
May Jesus Yamato bless this review with his beams
_You were expecting Kira Yamato in the Strike but it was ME,_ *_-DIO-_**_ _**_-NEO-_**_ MU LA FLAGA!_*
So he starts blasting?
Fuck Kira
@@557deadpool Yeah, the Ambulance was too kind...
Wait, wrong Kira.
YATA NO KAGAMI DAAAAAAAAAAAAA
"If you're mid/high tier builder" - surely 75+ MG would classify as mid tier+ .....
"Unless you're straight building" - rekt :(
The best thing about this kit (in my opinion) is.....
IT COMES WITH AN ACTION BASE
Anything that comes with an action base is... Heaven
well ig it will be needing one
“Most articulation in a real grade weapon (Referring to Launcher pack”
*looks at Tallgeese Dober gun*
Thanks for the review 👍
Just gonna wait for:
HG Gundam Marchosias
HG RX-78 Origin & MG Kyrios
When is the top kits of 2019 coming out I look forward to them
Hopefully next week some time. I like to put some extra effort into them so they take a little longer than other vids
@@MechaGaikotsu I would say wait for the "new" 2019 releases like hrududu ii units to be review by you.
@@MechaGaikotsu very excited
I can't wait!!!!!
Thx for getting back to me love your videos how you make them funny
THERE IT IS!!!
One of my first RG is the strike...and I love it, along with the RG mkii
Out of the box, mine is fairly solid really. Tinkered with it on a bunch of poses and didn't have anything fall off. In truth, my only difficulty with the kit was the ordering process through Bluefin as I picked this up with the RG Tallgeese 3, and they 'forgot' to send this kit out at release because of release dates between the two kits. So they labeled my order complete and tried to tell me I didn't have a RG Perfect Strike coming. XD
Imagine if they did a revived RG Strike with all the goodness that the RG Impulse has
they did, theres a shanghai gundam base limited ver of the perfect strike, they added stuff to the joints for better stability, just like how they did for the shanghai freedom RG
We got a 2.0 RG rx-78-2 so it’s possible we might get a 2.0 pf the strike in the future
Will you be covering the Perfect Grade 1/60 scale Perfect Strike Gundam?
Steven Dolce if he gets a sponsorship he might I think
Not to sound extra douche-y, but all PG are 1/60, so no need to point it out :p
@@Sazabi4prez
The PG Millennium Falcon was 1:72, and the PG Eva 01 was somewhere between 1:114 and 1:271 scale depending on how tall the Evangalion was (somewhere between 40m or 95m tall).
Sorry but, if you are going to get pedantic check your facts first or clearly specify what you mean, all PG Gundam to date may have been 1:60 but not all PG kits.
Forgot to mention that this version can at least stay upright with the aile striker on since the little place holder in the waist prevents it from flopping backwards like the normal Aile Striker; so its at least got that going for it.
Didn't notice that I was first til I saw the view count. Lol.
I’ve never built a seed kid, but if the force impulse in april is just as good as the rest of the new rg’s, I’ll definitely try it out
I’ve played with my RG strike for about 2 years and it still feels fine, I am so confused
Aiden Chau i touched my rg00 arm wrong and it snapped and i had to spend 8 hours trying to glue plastic to barely fix it
Re: Loose Joints on old RG Inner Frames
Saw a video of a builder placing cut-outs of the plastic holding the runners in between ball joints. Wondering if anyone has had any luck with this method?
Also, thanks @MechaGaikotsu for the tip on using paint/nail polish to tighten up joints. Might use paint on the non-ball joint areas that fold (e.g. knees and elbows)
Do you have the link to the video?
After seeing the ‘bored of gunpla’ video and this back to back...l decided to buy an RG aile strike. The hobby store owner also recommend me this kit over RG exia soo this will be my first visit to floppy town. But i am sure it is excitement embodied xD
CONGRATS ON 200K!!!!
Nice. I finished my RG Perfect Strike the same timing.
well, guess i’m not as bummed for missing the chance to grab this at anime nyc. wonder why this sold out but the RG Tallgeese III didn’t
Not that triggered about the Tallgeese (got the MG), way more triggered people bought the SEED junk instead of it though
Sazabi4prez it’s a decent/relatively cheap combination kit so it makes sense why they would, just needs an updated RG strike and the set is golden
"there is a million reviews of this already"
that's where you're wrong kiddo
I ended up here looking for Skygrasper reviews while on a quest to build all RGs, yes even the Zeta (already built) and Sinanju 😅😅😅 (scared to get til last)
Due to some random circumstances, I have 2 of this kit and I fully regret having them now.
So bad is it?
Can't wait to get the Perfect Grade version of this
100% agree
If you want all the accesoiries get the aile strike gundam and the skygrasper
You know what it feel to be a Straight builder ,The best haha
Thanks for the review. I suspected as much that I needed to beef up the joints when I first saw it.
Hmm , not really much difference, I would just buy the Rg aile strike + skygrasper. It's much cheaper, and you'd get the skygrasper.
the parts specific for the perfect strike are the battery pack and weapons holder for canon and sword
Suggestion required, which one is better? RG Aile Strike + RG Skygrasper or RG Perfect Strike?
there is a small support piece for the waist, you put it to make the waist more stronger
I have the regular RG Aile Strike and RG Skygrasper. Can confirm that neither of them came with a stand. And those holding hands did come with the Skygrasper.
Unfortunately no, the Skygrasper does not come with a stand.
Looks outstandingly cool
Answer me this question do you think bandai would go and make a whole new frame just for one gundam
From your voice, you seem like you in a good mood & happy while reviewing perfect strike gundam :)
Congratulations on 200k 🤩🤩🤩
Soooo, I'm thinking about parts 2&3 of the Advance of Zeta that you did and...
Oh, right. You haven't done them yet!😭😳😬
Been waiting for this! Thank you!
After building the absolute hand grenade that is the RG Build Strike, I can't imagine having all that extra crap loaded on it. o.O Looks awesome on the shelf if it makes it there in one piece though!
If you get the revived HG Aile Strike, you can take the parts from the old Perfect Strike and slap em on the revive Strike for a revamped Perfect Strike
Hehe love your reviews and your enthusiasm and energy! All that definitely made me subscribe to ya
Mine was bad at holding anything. Including the basic shield and rifle. I put it in a pose that looked cool, glued a few parts, and have left it alone on my shelf.
2:38 if im right you are missing a piece on ends of both the beam saber. Not the beam side but the other side..
If anyone wants a 1/144 perfect strike gundam (no one) you can put the striker packs from the old perfect strike onto the revive strike
How do you "tighten everything up"? I'm interested in getting this but I don't want to deal with the flimsiness.
Many people use paint on the joints. I just use some coats of extra thin or regular cement depending on the joint and the connection I need.
@@depshallburn thanks! I'll keep this in mind! Really wished they used the modern designs of the RG for this intead of just rehashing the old one.
I just finished this build and it’s solid 8/10, go for it if yall really want it!
I built the rg aile strike& the rg skygrasper about 2 years ago and it hasnt aged well at all. Im gonna just pass on this. The only thing i dont have is the updated striker pack with the 4 extra energy racks....but good review broham. Always keep up the amazing work!!!
This videos couldn't come in a better time for me. I wanted to buy the RG Strike but I tought the Perfect Strike was just an set of accessories without the gundam itself, like the Nu Gundam Funnels. Now I know I can just buy the Perfect Strike.
This really made my day. Thanks!
I do appreciate your warning, even though i just finished mine on the day you released the MG Barbatos review.
The action base adapter is an absolute garbage. I think the best way to deal with it is just glue it right away. You can never pose it with out the action base anyway (unless of course, if you glue the feet to some flat surface).
As for the weapons, I gave up on posing the luncher with the proper hand grab at the handle since the first day. Now I just put the hand somewhere behind the luncher to make it looks like the Strike is grabing it. Worst of all the waepon is that they choose to go with the foldable peg on almost everything. The joint of this peg is so loosy that even you push the peg right into the hand, the weapon will just become loose and wobbly. The beam boomerang is another nightmare. The grip mechanic is that the have a T-shape peg on the grip hands and you need to put the tiny cut on the handle into it to make it fit. The peg is so small that it is for me I think it is impossible to hold it firmly in the hands. The soulder joint is, I guess, is a RG syndrome. I put the hand gun on and raise it up at 45 degree angle, 5 hours later it drop parallel to the table.
I got it just because it looks so badass when it was release, which I am in my first month into Gunpla. It has been on my list since then.
Took a chance, went ahead and picked one of these up. Mainly because I like the strike, and I also snapped together a couple of the older RG kits over the last 3-4 weeks, and they really didn’t seem as bad as I expected them to be (for now at least, I’m sure they’ll be loosening up any day now); so since the Strike, Destiny, and Justice are three of my favorite ms designs I figured I’d take a chance on the RG kits for them.
How’s he holding up these days, I’m debating on this or rg impulse
@@aidan2747
The legs on mine are jelly
I have been waiting for a model kit that was supposed to come on the 15th of January, yet I feel so impatient. One my orders through Amazon that I bought before christmas came to my house first and that was a choro-q pull back car. The one kit that hasn't come to my house yet is an HG Banshee Norn.
Its just sad that it tookso long to get an rg perfect strike released for it to be literally just a repack of the sky grasper with a slightly different aile pack. Here's to hoping the hgce perfect strike wont be like this :3
Do have to win the auction or u can just buy right away
I have Aile HG
Someday I'll do a custom, with scratch build, to upgrade him to Sword Strike, then Perfect
btw, just built both the skygrasper and the aile strike RG and from my understanding the only difference (apart from the base) is the 2 nobs connecting the weapons to the backpack (and the extension battery) any chance to build/buy/replace those to achieve the perfect strike status? I know it is minimal (no prob for the sword, but the gun would be cool to use the extension arm) but still interested for the sake of a good pose :P
Pre-ordered the PG Version. And it will come between Feb.28-Mar.-3 I wish it's a gundarium tiere.
Schwert Gewehr Anti-ship Sword
Panzer Eisen Rocket Anchor
Midas Messer Beam Boomerang
Agni 320mm Hyper Impulse Beam Cannon
welp cant help it because he only said the real name of the Switchblades
I guess being too perfect is sometimes a burden that is so hard too carry lol
ALso can you do one on the RG rx-78-2
There’s an adapter included to make it not flop in the back but everything else will be floppy
in my country, if you buy normal RG Strike with RG Skygrasper, it will have same price (or cheaper?) with the RG Perfect Strike
would like to ask this for a while, the honeycomb tabletop is it IKEA? and what did you add to give it a light?
Didn't this come with an extra part that reinforces the waist? Was waiting for your take on that part :/
This kit is now available to order on premium Bandai and I’m having my doubts after the video. Does that waist part actually make it better??
If i purchase a rg sky grasper. And i have this kit. Will I be able to weild two guns?
That kit is awesome Mecha Gaikotsu 👍🏻
I preorderd the new pg perfect strike cant wait for that
I watched that @ 6:29 more times than I should have.
I wish they should fix the RG solidness joints of the arms and waist of the inner-frame when it comes to bulk-heavy accessories.
Regardless, it's a nice full-package.
The newer rg kits are much more solid since they don't have a preassembled inner frame. I have a few real grades and the later ones are much better kits by far.
Are you going to review the MG perfect strike?
Also are you going to build the gundam unit 4 in commemoration of the HG gundam coming out?
Also also, review that MG 00 gundam in the pile
does it possible make a perfect strike gundam with aile strike+skygrasper?
almost, all the parts are there apart from the aile striker backpack which is a bit different (the tail and the extra nobs to attach the sword and the launcher)
I purchased the RG Skygrasper about one week before this kit was announced, I was slightly annoyed but then realized it was P-Bandai so I wouldn't get it anyway.
Wait does this still come with the parts for the normal aile strike pack?
Is the striker pact compatible with the early grade
I wonder how much will be the PG Perfect Strike Gundam cost? Same with PG Exia Lighting Model?
Is it possible to do this with just the RG Skygrasper and Strike?
can you review the mg perfect strike?
Woooh!! Finally!!
There’s also another option that I have... I bought the regular MG Aile Strike RM and then bought the Premium Bandai accessories for it... so there you can get it less expensive than the one with titanium finish 👌
Will you review the mg kyrios gundam when it's coming out?
So is the frame better than the 1st aile strike rg ?
Hg Perfect strike + HGCE Aile Strike = HGCE Perfect Strike (PS packs for the revive)
Mecha, could you was do a review about the rg force impulse gundam?
Also the hg mobile doll may in hg... Or figure rise standard?
Rip to everyone who bought the separate Gundams together
well it is a lot cheaper getting the 2 separated, at least here in italy, I paid 53 euros for both RG kits, amazon lists the p-bandai at 103 euros, so basically double the price of both RGs for just a revamped aile striker backpack, definitely not worth it
Did you forget about the extra waist part? Mine keeps it back straight en is pretty stable on that base.
@@Gunpla_shrimp part H9, it goes between the torso and the waist. It is used to prevent the torso from bending backwards
The base adapter in the first release is solid as a rock. Why would they change it.
Dude, any chance of the Dwadge Custom some time soon?
Can you possibly review the master grade version in the future?
Finally got my first gunpla today
Is this worth it to get? Or should i go for the MG?
When will this xomeout in market
Do You ever reviewed the 1/100 grimgerde? It’s a Good kit
so I think i'll be getting the MG one. but on the budget the Strike revive + HG Perfect strike is better.
my RG strike base adaptor is stuck onto the waist. I can't remove it
Love the look of this kit and I can't wait till it comes in and Im looking for the titanium finish on the mg Cruz it's soooooo good looking
@@Gunpla_shrimp I do know that. I think I typed this in on the wrong video or something becouse I cant cant remember what or why I'd put titanium near a strike kit
@@Gunpla_shrimp so it auto correctZazaed my dude unless you know what a "mg Cruz" is