70mai A200 dual dashcam: review & hardwire installation tutorial! (the most complete video)
Вставка
- Опубліковано 1 лип 2024
- 0:00 introduction
0:26 disclaimer
0:51 product overview
3:03 unboxing
7:52 installation in the car
8:16 dashcam installation & wiring
15:57 hardware kit installation
21:57 A200 dashcam configuration
27:38 70mai application overview
33:08 dashcam footage
36:03 comparison A200 vs ProPlus+
36:45 parking surveillance & timelapse
39:13 SD card storage
39:49 conclusion
Buy it here: s.click.aliexpress.com/e/_DmY...
#dashcam #70mai #review #tutorial #hardwired #test #car - Авто та транспорт
thanks for the thorough review and installation tutorial
You’re welcome! 😉 thanks for watching 😄
Thanks you for your review... This helps me a lot ❤
🙏
Hi this is a great video! My A200 does not automatically start up and I always have to press the power button to switch it on after I start the engine. Is it because it has been connected to the wrong fuse?
Hi! Thank you! Yes I guess. Mesure the fuse to be sure. I guess it is a continuous fuse. Also make sure you check the dashcam settings to be sure there is no auto off enabled somewhere.
I got a question, will the dashcam record the front and back view of the car? Or, only the front? While in parking surveillance?
Hi! Parking surveillance records both but it is only event triggerd. Timelapse will record continuously but only the front 😉
Q: By pressing ''lock the video'' new video is made - from pressing the button to the end of lengthen the video - or temporary section is locked?
Hi, I’m not sure what you mean by lock the video. Where did you saw this in the video/app. I guess it’s a function the protect the existing (full) clip from being over written.
There are so many fuse, I see you using A10 fuse put on the fuse tap, is it commonly use it? , I saw some use A5 fuse, able to explain?
You should use a fuse that is free or not critical in the first place and that can have one more device added up to it as well. Which fuse that is, depends on your car of course. A min 10A fuse would be best.
A great camera for the budget.
It absolutely is! 💯
I ordered it today from aliexpress for €76 including the rear camera. Here I will replace my previous 70mai dashcam light. Am curious...
Nice! You will love it 😉
Hi,after entering time lapse mode but the green light turn off too, is this normal?
It stays on in my car, except when the voltage drops under 11.8V I think. Are you sure you’re using a continuous power source? Does the battery has enough charge?
Is it possible to remove the date and time of the recording?
Not sure but you can also crop the video 😉 I do this when making nice footage but in case of accidents it is very useful to have the timestamp.
I can reset memory card from dash cam itself?
Hi! On the dashcam itself not but in the 70mai app you can. Just connect to your dashcam by turning the hotspot on 😉
@@LaPalmeraie0032 ok,thanks
Mine doesnt even turn on... its brand new... I am so disappointed.
Hi! Did you connect it to the power source? In the car, the outlet should provide power which sometimes is only when ACC is on (contact). In hous you could try a phone USB charger. 😉 Otherwise, you always have 1 year warranty so no problem.
Hi! I have a Ford Territory 2024, it has an USB charger behind the front mirror winshield designed for dash cams, I plugged it in there the first time after unboxing and it didn't work, then I tried the 12v contact with the USB adapter included in the box and also didn't work, at home USB charger also doesn't work... I am so disappointed, I was excited...@@LaPalmeraie0032
Very bad wiring, I don’t want to damage my new car sealing and packing for this wiring. So, don’t want to buy this camera. I will check if someone professional can do wiring without damaging the car. 😀
🤔 he will do it exact the same way… you not seeing it being wired doesn’t means it will be done better or different. You do not damage anything. It’s is made for being openend for repairs etc 😉