Great info/time ratio ;) Take the cam just an inch farther from your face, drop the whip sound 20% and add some timestamps for a 99% perfect video Thanks!
Thank you for your video. Most reporters, and catalogs don’t mention if a camera is in one with a transmitter, causing a lot of confusion at least for this newbie.
Thankyou for this helpful video to me as a newbie in fpv. Even if i'm pretty hard to understand English. (I'm Vietnamese) and have to set video speed to 0,75%. Thanks so much.
Awesome video! I had a question about battery life and how long you could expect to fly with a 25mW AIO with lets say a 3.8V 260mAh battery versus a 3.7V 820mAh? Also if you used 50mW instead for the range what kind of life could you expect ? Just getting into this and I'm learning alot! Thanks
The video is awesome and useful , but could i ask you to explain more what it is mean that your warning don't turn on VTX unless the antenna is connected ? . I just thing that we connected the battery to AIO cam then choose the A or B and then the 1 to 8 suit to the FPV screen ,and finnaly the 0 25 50 200 mW that fit to our need
Great Video, What are typical flight times using tiny silver square batteries for these fvp cameras. Battery on my plane 3S last 7-12 minute flights. Will these match that or will video cut out before that?
I want to put a FPV on my tug boat. So what kind of kit ,camera etc would I need to make this all work without breaking the bank. Also I want to use my phone as the monitor. Or should I get a monitor. This boat is just to retreive my high speed boats so the video feed quality doesn't need to be that great. Also the battery power I need for the camera. I would get the battery just for the camera on board. Thank you. PS: Getting a 30" tug boat and want a Farley cheap setup but with decent range for the feed.
Hello, I am interested in putting one of these on a car to do crawl space inspection under a house (I can use a laptop or my phone to receive with the FPV). Light would be helpful in the crawl as well as medium to wide angle decent quality photos/video. What do you advise me what you recommend? I can solder but have no current experience with current tech (do have an android phone and windows 10 laptop). Thank you!
Hi, Brian! So, if you wanted to use a laptop or phone to view one of these little all-in-one analog FPV cameras, you would need a special video receiver that is designed to work with a phone or laptop ( here's an example amzn.to/3vyUokb ). Otherwise, you can just use a monitor that is built to receive the analog FPV video fed (here's an example amzn.to/3eMwNqu ). As for capturing HD video or pictures, there are hybrid designs like the runcam Split which record HD while sending out live low quality video feed, but the easiest solution may be to just mount an action camera next to the FPV camera.
Can you set it up to have three cameras but you have a split screen or a switch to swap cameras? I'm trying to set up my rc tank with a commander gunner and driver's cams
I want to ask an question about that tiny camera can you tell me were you got it if you tell me I will give you a big thumbs 👍 up,subscribe and turn on the notification bell and select all I also love all your details and videos🎉🎉❤❤😂😂😂
Hi! Most rx airplanes don't use flight controllers, and instead use a pwm receiver to control (and also power) the servos. I which case, the camera could be plugged into the receiver using a servo-style plug (assuming 5v is enough to power the camera and the amp draw of the video transmitter is very low).
I'm having a very hard time finding receivers and transmitters that I can use with my phantom FC40. I've spent alot of time and money modding this thing and I never had to add fpv on anything before so I'm not well informed on my options. I cant use 5.8ghz because that fc40 runs off that signal. Any suggestions?
I'm just starting FPV and I found this video very informative so, thank you! One question, I'm mounting this camera to my foam plane. It looks like you just hot glued it to the fuselage. Is that correct? It won't hurt the camera?
Hi! Thanks! Welcome to the hobby! Yes, the hot glue won't hurt the camera, just keep it away from the lens! Also, be careful about the glue being too hot and melting through the foam.
You see the all in one camera you have? Well i wired that stright in to the battery of my bugs 3 drone. The signal comes through crystal clear for 1 second and the BAM it cuts out. The camera is very warm and still on but seems like it's not transmitting a signal... Am I doing somthing wrong?
@@adventureaways1534 The 7.4v is the key. Your camera unit needs to accept voltage up to at least 7.4 volts (more than that and it will get fried!). Check the camera manual for the specifications, or it might also be printed on the unit itself.
Hi! No, not a computer. You will need a video monitor connect to a video receiver, usually in the form of a single unit goggle setup that you can wear on your head.
Thank you for sharing, I tried some of the links to amazon and the items are no longer available, update the links so you can benefit from the affiliate program.
Hi! I haven't used both of them, but according to the specs the A1 has 25mW output power and the A2 has 200mW. So the A2 may give better reception in some cases, but will drain the battery faster.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I gave a like for the "a whole new world..."
I do appreciate that! 😉
I have a sub
Great info/time ratio ;) Take the cam just an inch farther from your face, drop the whip sound 20% and add some timestamps for a 99% perfect video
Thanks!
Bro you got some great content as always. Thanks for helping the new guys
lots of great info. thanks.
👍😁
Great summary. Thanks. You cover lots of the smaller things like broadcast MW and the fish eye view. Great!
I like all your videos,
I have a question:
What can I use if the drone voltage is higher then the camera needs?
Resistors
Thank you for your video. Most reporters, and catalogs don’t mention if a camera is in one with a transmitter, causing a lot of confusion at least for this newbie.
thx, great vid for beginner
Thankyou for this helpful video to me as a newbie in fpv. Even if i'm pretty hard to understand English. (I'm Vietnamese) and have to set video speed to 0,75%. Thanks so much.
Nice video! I had a question on how to connect it to some sort of device like a headset or device?
Are u able to use like a phone to connect to it?
this was very helpful. Thank you
I'm just getting into this FPV thing. Thank you for your time. I learned a bunch.
Awesome video! I had a question about battery life and how long you could expect to fly with a 25mW AIO with lets say a 3.8V 260mAh battery versus a 3.7V 820mAh? Also if you used 50mW instead for the range what kind of life could you expect ? Just getting into this and I'm learning alot! Thanks
what is a good monitor style video player for fpv flying
This is good very professional thanks for sharing please help me What camara u r using in the first flying vídeo?
The video is awesome and useful , but could i ask you to explain more what it is mean that your warning don't turn on VTX unless the antenna is connected ? . I just thing that we connected the battery to AIO cam then choose the A or B and then the 1 to 8 suit to the FPV screen ,and finnaly the 0 25 50 200 mW that fit to our need
Can I set up a micro camera and record the flight on a memory card for view on a computer after the flight ?
Gopro, buy you probably mean recording while fpving?
Maybe I missed the links but Was hoping for an actual suggestion on what camera to use and how to setup . Good advice on the antenna though
hi, you said we will talk about how to view the video using goggles or monitors, when will you make that video
Am i able to use a seperate battery For the camera and plug it right in?
Great Video,
What are typical flight times using tiny silver square batteries for these fvp cameras.
Battery on my plane 3S last 7-12 minute flights.
Will these match that or will video cut out before that?
can the video be patched out to a smart TV?
very informative. thank you.
Glad it was helpful! 👌
Very informative video. Thanks!
So I can solder on a servo plug on the battery and connect it to the PWM? Would like to avoid adding an extra battery
How do you receive the FPV transmission on a mobile phone?
You will need a special receiver unit for either android or Apple phones.
Excellent stuff thank you
Glad you enjoyed it!
Hey man! Can you tell how should I mount this on my 5' quad
hot glue lol
Is it possible to make a 3 in 1 quadcopter whoop build to save on money?
I want to put a FPV on my tug boat. So what kind of kit ,camera etc would I need to make this all work without breaking the bank. Also I want to use my phone as the monitor. Or should I get a monitor. This boat is just to retreive my high speed boats so the video feed quality doesn't need to be that great. Also the battery power I need for the camera. I would get the battery just for the camera on board. Thank you. PS: Getting a 30" tug boat and want a Farley cheap setup but with decent range for the feed.
Very nice content and I learned a lot, keep it up!!!!
Adam great vid. Very informative for a noob like me.
Cool video!!!
Hello, I am interested in putting one of these on a car to do crawl space inspection under a house (I can use a laptop or my phone to receive with the FPV). Light would be helpful in the crawl as well as medium to wide angle decent quality photos/video. What do you advise me what you recommend? I can solder but have no current experience with current tech (do have an android phone and windows 10 laptop). Thank you!
Hi, Brian! So, if you wanted to use a laptop or phone to view one of these little all-in-one analog FPV cameras, you would need a special video receiver that is designed to work with a phone or laptop ( here's an example amzn.to/3vyUokb ). Otherwise, you can just use a monitor that is built to receive the analog FPV video fed (here's an example amzn.to/3eMwNqu ). As for capturing HD video or pictures, there are hybrid designs like the runcam Split which record HD while sending out live low quality video feed, but the easiest solution may be to just mount an action camera next to the FPV camera.
very good video
Can you set it up to have three cameras but you have a split screen or a switch to swap cameras? I'm trying to set up my rc tank with a commander gunner and driver's cams
Thank you for this.
I want to ask an question about that tiny camera can you tell me were you got it if you tell me I will give you a big thumbs 👍 up,subscribe and turn on the notification bell and select all I also love all your details and videos🎉🎉❤❤😂😂😂
I need a fpv set up for my kyosho fazer mk2 chevelle ne suggestion I would like to get a all in one set up if possible
Can you suggest me a fpv camera under 20-30$ *which connects to a smartphone* ?
where would you plug a camera into the flight controller on a rc plane?|
Hi! Most rx airplanes don't use flight controllers, and instead use a pwm receiver to control (and also power) the servos. I which case, the camera could be plugged into the receiver using a servo-style plug (assuming 5v is enough to power the camera and the amp draw of the video transmitter is very low).
hey, how long-range will the camera be? also could you link a battery for it as well
He did
ks-23 makes great comeback.
This is helpful, thanks. I like to mount a caddx loris behind my mavic so I can get a recording and fpv too. I hope someone will create a tutorial.
That would be cool!
Hey when I plug in the skydroid to my android phone it's just blank no static or anything can you help?
subbed for the whole new world
I'm having a very hard time finding receivers and transmitters that I can use with my phantom FC40. I've spent alot of time and money modding this thing and I never had to add fpv on anything before so I'm not well informed on my options. I cant use 5.8ghz because that fc40 runs off that signal. Any suggestions?
I'm just starting FPV and I found this video very informative so, thank you! One question, I'm mounting this camera to my foam plane. It looks like you just hot glued it to the fuselage. Is that correct? It won't hurt the camera?
Hi! Thanks! Welcome to the hobby! Yes, the hot glue won't hurt the camera, just keep it away from the lens! Also, be careful about the glue being too hot and melting through the foam.
@@RCwithAdam1 Thanks, Adam!
Can i use any type of eachine for the view of live video . REPLY BCOZ I HAVE WRITTEN WITH HOPE
Hi! The brand of goggle/video receiver doesn't matter, as long as it is made for 5.8gigahertz analog video.
@@RCwithAdam1 I want to know if 5.8 gigahertz can be used for very long range of distance ?
What kind of Jerk gives Adam a dislike. Adam you are awesome thank you again
You see the all in one camera you have? Well i wired that stright in to the battery of my bugs 3 drone. The signal comes through crystal clear for 1 second and the BAM it cuts out. The camera is very warm and still on but seems like it's not transmitting a signal... Am I doing somthing wrong?
Hi! Is battery voltage within the correct voltage range for the camera?
@@RCwithAdam1 I'm so confused lol the camera is from 20mw to 200mw and the bugs 3 battery says 7.4v 1800mAh
@@adventureaways1534 The 7.4v is the key. Your camera unit needs to accept voltage up to at least 7.4 volts (more than that and it will get fried!). Check the camera manual for the specifications, or it might also be printed on the unit itself.
@@RCwithAdam1 wish i seen this comment before. Its just fried itself lol
How can I view the feed? And can I view it with a computer??
Hi! No, not a computer. You will need a video monitor connect to a video receiver, usually in the form of a single unit goggle setup that you can wear on your head.
@@RCwithAdam1 I used a R0TG02 and debut video capture software, I viewed in on my laptop. However due to the latency it's not suitable for fpv
Thank you for sharing, I tried some of the links to amazon and the items are no longer available, update the links so you can benefit from the affiliate program.
I bought that and it got red hot. Why would it do that?
Oh no! It must have had a short somewhere!
@@RCwithAdam1 I had a one and it got really hot and plus the antenna on it broke
How to long range it? Maybe around 500 meters
Hi! It really depends on the antenna type and power output, but yes, 500 meters is possible.
@@RCwithAdam1 is it still good for months? I'm about to equip it on a rc truck for trail
@@kronosdarkangel5290 yes
i am new at this video rc stuff but the static in feed make think nope not for me
We Ham Radio Operaters can Use the 50 Mhz Band for Controlling FPV, Drones
Umm if I have a budjet of 300 what can I get
Camera nice
I have the cheap $15 3 in 1 and the video is great but doesn't have a far range 😥💧
There sure ain't a lot of comments
help i want this har rc truck
Nice
I was watching the video and it was like..
And the best thing about this is tha…
Ad pops up:
DiD u sTAIn uR sHiRt AgAin????!
thanks cool
whats the difference between an akk a1 and an akk a2?
Hi! I haven't used both of them, but according to the specs the A1 has 25mW output power and the A2 has 200mW. So the A2 may give better reception in some cases, but will drain the battery faster.
This is pal camera, range of this camera
Hi! I'm not sure what you mean.
wHolE nEw wHeEeEeEeErLD That's a sub
25MW is actually a billion times stronger than 25 mW...
lol you're right! I never really thought too much about the capitalization of the abbreviation given the context.