@@luisalvarez6683 didn’t hook my white wire up I left it unhooked . I didn’t have any problems with the ecu or cutting out like some say you will they say you hook to the pos on the battery but I could not do it when I teased wire it had 12v on it and I could not hook a hot wire to the pos term was afraid I would burn some thing up .
@ Gotcha. My white wire is hot as well. My switch is built into my side control remote & im not getting the motor to turn over. It’ll beep when I turn the switch but no crank.
Hey what I have fig so far my motor 2003 Suzuki df90 has the white wire on the motor in the ecu box. I still have no update on the white wire under that has power have check every were with no luck so for now I have heat shrink to keep if from shoring some thing out I’m in ga so soon as I get to Florida going to stop buy a dealer
@@chadpipkin840that white wire is to power the ign switch. The other white wire is in the cowling and honesty not usually a big issue if you keep a clean motor
@@BarberIsaac they didn’t give me any idea on it there’s also a white wire on the motor so I just covered it ahead of time heat shielded so not the touch and thing boat seems to run fine so far .
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
That white wire need to be on the battery with an add a fuse. It turns on your ECU
Which color wire do I hook the white wire to the ignition switch that’s built in the side control remote ?
@@luisalvarez6683 didn’t hook my white wire up I left it unhooked . I didn’t have any problems with the ecu or cutting out like some say you will they say you hook to the pos on the battery but I could not do it when I teased wire it had 12v on it and I could not hook a hot wire to the pos term was afraid I would burn some thing up .
@ Gotcha. My white wire is hot as well. My switch is built into my side control remote & im not getting the motor to turn over. It’ll beep when I turn the switch but no crank.
Yes that is the white wire . you have to take the entire outer casing off along with the exhaust filter to get to the rest of it.
Hey man have you figured anything out so far?
Hey what I have fig so far my motor 2003 Suzuki df90 has the white wire on the motor in the ecu box. I still have no update on the white wire under that has power have check every were with no luck so for now I have heat shrink to keep if from shoring some thing out I’m in ga so soon as I get to Florida going to stop buy a dealer
So, any answer? I have the same problem 🤗
@@chadpipkin840that white wire is to power the ign switch. The other white wire is in the cowling and honesty not usually a big issue if you keep a clean motor
I would try my luck in some of the Suzuki groups on Facebook.
I was able to find out I took it to a Suzuki dealer they took care of it for me .
So what did the dealer say/do with the white wire?
@@BarberIsaac they didn’t give me any idea on it there’s also a white wire on the motor so I just covered it ahead of time heat shielded so not the touch and thing boat seems to run fine so far .