Spicer 18 Jeep transfer case rebuild
Вставка
- Опубліковано 21 лют 2024
- This video is sponsored by Kaiser Willys Auto Supply
Use code REDEYEGARAGE10 to save 10% of your entire order from www.kaiserwillys.com they have tons of Willys and AMC parts!
If your jeep transfer case needs rebuilt or resealed, or you just want to see how things work you’re in the right place. Let’s dig in! The spicer 18 variant was used in all Willy 4x4’s from 1941-1972(early) before being replaced by the Dana 20. The spicer 18 transfer case is a cast iron 2-speed gear drive unit. The most common low range ratio is 2.46:1 (civilian) it has a offset rear output with passenger side drop. It is extremely robust/small/light…it can handle lots of power and it’s very easy to work on! Please feel free to ask questions! Thank you for watching!
Dissassembly: • Rebuild a Willys jeep ...
Parts used in this video:
Overhaul kit: www.kaiserwillys.com/products...
Rear Flange: www.kaiserwillys.com/products...
Front yoke: www.kaiserwillys.com/products...
Yellow metal safe gear oil: www.kaiserwillys.com/products...
⭐️ Service manual: www.kaiserwillys.com/products...
#willysjeeps - Авто та транспорт
Great video! Thanks for sharing!
Excellent video. You did a great job explaining the hows and whys of each step. I tuned in because after installing new seals I've had a couple problems with leaks. Your video gave me the answers I needed. Thanks so much! Subscribing now.
Awesome, thank you! I’m glad it was helpful! 👍
Good video on the T-18,allready done my 48 2A Trans/Transfer Case,ready to go back in,getting all the parts together now for my T-90 D-18 for my 56 Kaiser Willys Truck!Thank You for taking the time to make and post this video,very help full to all!
Thank you! 🙏
Good "how- to" on this one..awesome job!!
Thanks teach!!
🤙🧙♂️🐺👍
Thank you hombre!
Very helpful thank you
Very thorough. Thank you for taking the mystery out of the magic.
Awesome teaching video.
Thank you!
That's a lot of experience of the yrs we love do do what we do take care dad be careful
😃 You know it! 👍 thanks for watching!
Thank you
Shims, on the speedometer housing, I have a 1960's Brazilian service from Willys Overland, was setting with a filler gauge between the high gear and the main shaft...
I have no idea what you’re talking about. lol… the procedure used in this video for setting output end play is the correct method.
Good use of copper spray sealant 👍...Is rebuild minor kit from KW a Crown kit? Never seen that type of shaft before
No, this is a kit they assemble themselves. They’ve been working hard to put together the best kit possible.
Good to know they're trying to up their game 👍@@redeyecafegarage7484