And have a fence on your drill press to stop the part spinning around if the drill grabs. A painful experience awaits my friend if you don’t . Only a matter of time
I'm used to larger, corded routers ua-cam.com/users/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
For No. 2 you need a longer bar as a reference. You can see it in the last seconds when the router turns a bit sideways. But the idea is so simple and easy to build.
In the second one, the router bit is pulling _away_ from your fence. You would want to cut in the opposite direction for the router to pull inward toward the fence... or put the fence on the opposite side.
Вообще-то, то что делается приспособлением №5 это работа рейсмуса. Каретка подобного типа была бы полезна для выравнивания широких площадей типа столешниц. Но для опоры роликов нужна идеальная поверхность, а не показанные дощечки. И 6 опорных роликов , как мне кажется, это перебор.
I tend to think that these kind of videos are produced by the tool companies because you watch them and all you think is how am I going to get that tool or that one in order to create the toolhack we watch on this kind of videos... 🤔
🛠🪚🪛 Another great addition to milling techniques! If Number 5 could run on aluminum U-profiles, it would probably work even better. Greetings from Rudi in Germany! I'm curious to see the amazing woodworking tool hacks and router tips and tricks in this video. Keep up the innovative work! 💪🌲🔨
Junkyard - Origin of Creativity I have 3 to 4 Cordless Drils .I would like to take one of my Cordless Dril and make Hack Router out of one show me what you can do
Много опасной и неправильной работы. В целом, ерунда. Особенно последний рейсмус, который колесами едет по мусору и ровной плоскости не даст. Да и колес надо всего 3, а не 6.
@junkyard - Origin of Creativity on minute 6:28 you have a kind of vice... any chance you can do a video on how to make it? looks awesome, just like all that you do... many times I even catch myself open-mouthed... so impressive!!! thanks!
DO NOT WEAR GLOVES NEAR ROTATING TOOLS.!!! The glove will draw your hand into the tool bit!!!!!
Yes, never wear glove, ring, chain, scarf...👍
And have a fence on your drill press to stop the part spinning around if the drill grabs. A painful experience awaits my friend if you don’t . Only a matter of time
I got ur tool bit right here
Thank you, man!
Gloves tear first before draw,
Valeu muito obrigado!
Brasil 🇧🇷
Obrigado por gostar deste vídeo... confira meus vídeos mais recentes
Excelente. Que cada quien haga los arreglos necesarios segun sus necesidades y criterio de uso. Buen video.
Золотые руки. Судя по комментариям смотрят профи. Молодец!
Спасибо
I'm used to larger, corded routers ua-cam.com/users/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
For No. 2 you need a longer bar as a reference. You can see it in the last seconds when the router turns a bit sideways. But the idea is so simple and easy to build.
I would add taking multiple passes, don’t hog out that match material with a trim router.
I noticed that movement as well.
I was expecting those gloves to drag your fingers into the router cutter. You've been lucky...so far.
when using this kind of power tools keep safe and always presence of mind
That is the easiest and best board plainer I have seen.
Wieder sehr gut Ergänzungen für Fräsen.
Wenn Nr 5 noch in Alu U-Profilen laufen würde, ging das vermutlich noch besser
Gruß Rudi - Deutschland
Vielen Dank für deine Unterstützung
brilliant idea thanks
Most welcome 😊
Master craft ! thank you ! very originals ideas !
In the second one, the router bit is pulling _away_ from your fence. You would want to cut in the opposite direction for the router to pull inward toward the fence... or put the fence on the opposite side.
44
#1 and #3 seem to perform the same function or am I missing something. I love the clamp in the 3rd one though, just what I needed the other day.
Yes. Except #1 jig is far simpler and quicker to build. I can't see any superior benefits deriving from making #3.
Number 4, you're doing a climb cut which is dangerous! You should feed from the other side!
Thank you for your comment
Минус 5 приспособления - колесики. Под них и стружка и опилки попадать будут, потому о качестве фрезерования не стоит говорить
Вообще-то, то что делается приспособлением №5 это работа рейсмуса. Каретка подобного типа была бы полезна для выравнивания широких площадей типа столешниц. Но для опоры роликов нужна идеальная поверхность, а не показанные дощечки. И 6 опорных роликов , как мне кажется, это перебор.
@@Alkorix я знаю это приспособление) оно есть у меня. Но значительно прочнее, да и ролики закрыты..
Попадает стружка под ролик и всё коту под хвост. Вторая идея вполне норм, правда направляющую подлиннее.
સરસ
Perfect hacks when you don’t care about accuracy.
1 video tuyệt vời 👍
It took me a minute to figure out what it was, but that’s an interesting use for a jigsaw! I’ve never seen one used like that before,
Oh is that what it is. Now that you mention it..
there are multiple issues with the tool usage. Let me just mentione 1 - never work in gloves next to the rotating tool.... and more.
Mantap jugo
👍👍👍👍👍
#4 is really dangerous. Feeding from the wrong side and using gloves. Do this only if you don't mind losing body parts.
What size rollers bearings are you using??
12:22 frene işlemini yaparken tekerlerin altında kalan telaşlar yüzünden açı değişir frene işleminde kalında olsun.güzel çalışma.
Your creativity is next level. Thanks for sharing. Without getting too long winded I have been looking for some of these ideas
Awesome! Thank you!
Good idea for your video.
I like your jigsaw setup do you have a video on how to make it great job thank bill
I had already made that video titled: How to Make Jigsaw Table Machine || DIY Jigsaw cutting station
excellent i really enjoy watching your talent
Thank you...
Crosscutting on tablesaw without a sled is dangerous. 😮
I tend to think that these kind of videos are produced by the tool companies because you watch them and all you think is how am I going to get that tool or that one in order to create the toolhack we watch on this kind of videos... 🤔
2:00 are you using metal threaded screws in wood? 🤣🤣🤣🤣🤣🤣🤣🤣
🛠🪚🪛 Another great addition to milling techniques! If Number 5 could run on aluminum U-profiles, it would probably work even better. Greetings from Rudi in Germany! I'm curious to see the amazing woodworking tool hacks and router tips and tricks in this video. Keep up the innovative work! 💪🌲🔨
thank you for your love
Es kan aluminium bearbeiten nur langsam.
O son of a gone, you are amazing. 😮
Junkyard - Origin of Creativity
I have 3 to 4 Cordless Drils .I would like to take one of my Cordless Dril
and make Hack Router out of one show me what you can do
❤❤❤❤❤❤❤
Please name the things in the future. It makes them easier to remember than Hack #1, Hack #2, Etc.
حسنا..عملت الجزء الاول للتعشيقة ...كيف يمكن عمل الجزء الاخر.....
Pretty creative
Attach a router to a thin sheet of plywood and place in a workmate, for instant router table, should be able to use the router own fence
your plywood cuts are chipping the edges, what can you do to avoid it?
cool jigs but why is he using a drill to cut slots on the jigs when he has the router right there? 🤪
Para maderas muy liviana talvez funcione.pero ahí se ve claramente que el fresado es irregular falta más velocidad,
Много опасной и неправильной работы. В целом, ерунда. Особенно последний рейсмус, который колесами едет по мусору и ровной плоскости не даст. Да и колес надо всего 3, а не 6.
Amazinka realisacionaki ! Nevers sinaki inukol zeu wordas putinkon 💪forta é
@junkyard - Origin of Creativity on minute 6:28 you have a kind of vice... any chance you can do a video on how to make it? looks awesome, just like all that you do... many times I even catch myself open-mouthed... so impressive!!! thanks!
Stop using gloves with power tools especially so near to the bit
Got tired of watching. Nothing of interest, I could do the same things, simpler, and easier.
Go sit on it and you will feel better.
Please. These belong in the junkyard.
when using this kind of power tools keep safe and always presence of mind