Thank you so very much Sir for this video, I just purchased the UHD2 93sv yesterday and you are the ONLY person I have found to have a video on how to operate this unit. I'm in Michigan and waiting for the weather to change so I can get this installed on my boat and get out on the water and put it to use. It's replacing a SIMRAD GO9 XSE, it is a good unit, for those who like SIMRAD, however, it's just not for me, I like the ease of use with the Garmin better. I look forward to future videos on the UHD2 93sv. Tight Lines!!
You can add me too that list. Really appreciate your videos, I’ve learned more from you and Richard gene than anyone on the tube. Looking forward to your sidevu episode!
Good morning Davis I recently subscribed to your channel. Love your videos. I purchased my first lithium battery and charger. My battery has the spade style terminals. Do they make “marine grade” female spade terminals for wiring? I’ve watched several videos online and they recommend running 10 or 12 gauge wire and to use marine wire. They always show wiring up to a full size battery and using large terminals. 10 or even 12 gauge wire is good size and Im concerned finding terminals that will fit the terminals on the small lithium battery. Any info or help on this would be greatly appreciated. Thanks
The regular transducer is normally mounting on the transom (typically starboard side of engine) or the trolling motor. The livescope transducer can be mounted on the trolling motor shaft or you can order a seperate pole to mount the livescope transducer and place it anywhere on your boat.
No, the gpsmap 1022 has the same pixels but it does not have sonar capability (no sidevu/ downvu) other than a livescope connection. If you're looking for a livescope only screen the 1022 is a great option, but if you want to use mapping and sonar (sidevu) then the 93sv is the way to go
@@FloppingCrappie I would like to know is the 93 uhd2 screen as good has the 1022 when it comes to livescope knowing that the 1022 have a faster processor
@daviddincler7494 I honestly can't tell if there is a difference in processing speed between the two units. I used the 93sv for with livescope for a few years before getting the 10-inch screens (1022 and 1042). All three units keep up with real-time images (no lagging between what your lure is doing vs. what you see on the screen. If you have the budget, I would recommend either the 1022 or 1042 due to the touch control knob (zoom feature/gain settings) and slightly larger screen.
I've not had a good experience with this unit. I have no doubt it's very capable....that's rarely a problem these days. But, it's one of the most unintuitive pieces of gear I've purchased in quiet a while. It was a VERY strong recommendation from my mechanic. I've been out of the game for a while, and didn't know what the "best on the market" was. I could care less about Forward Facing Sonar. I'd like fundamental down or side imagine capabilities, and depth/contour charts. That said, I also had to purchase a $200 addition to be able to see the lake graphs for Florida. But, I digress... What I want to know is when pulling up the maps/charts after downloading, and registering the Navionics package, for my area....why can't I see the depth contours of the various lakes (Florida in my case). I only seem to be able to see the contours of the few lakes I've actually been on. I tried pulling up Okeechobee, and Toho, and it showed nothing (as far as contour graphs go). Do you know if there's an explanation for this? Thanks.
I really like this unit unfortunately in Canada it retails for $1600 at Cabelas... I would like to get this as a 2nd screen to network with my 102 but its pricey.
This is the new meniu on this 😊 but i love old menyu display,i tray too spek with garmin haw too exchand this..but is imposible too change in implament in new design😅
A dedicated Lithium Battery is the way to go and solder all connections covered with shrink tube👌. If i didn't already have my 1222,Id get this unit for this price👌
I have a question When you see something on your side imaging Where is it located at in reference in the water, since your transducer is on the back of the boat, when you see this on your screen, you’ve already passed over it, do you have to cast behind the boat
There are 2 controls for depth, plus/minus buttons and the drop down from the middle of the screen. I want one of them to control brightness like in the previous version. Any ideas? Thanks for the video, waiting on the next ones.
My Pro Team 175 doesn’t have room for a third battery. If I were to purchase a 3rd battery how big would I need to get if it is solely for the Garmin? I have a couple compartments in the back of the boat that may fit another battery if it isn’t too large. Any suggestions would be appreciated.
If you get the 93sv (no livescope), you will be able to run a 12ah lithium all day. The 12ah lithium I use for ice fishing are made by enduropowerbatteries.com. dimensions are roughly 6x4x4. If you run a livescope I would recommend a 24ah to 36ah battery. These are still much smaller than a normal 100ah boat battery.
Thank you so very much Sir for this video, I just purchased the UHD2 93sv yesterday and you are the ONLY person I have found to have a video on how to operate this unit. I'm in Michigan and waiting for the weather to change so I can get this installed on my boat and get out on the water and put it to use. It's replacing a SIMRAD GO9 XSE, it is a good unit, for those who like SIMRAD, however, it's just not for me, I like the ease of use with the Garmin better. I look forward to future videos on the UHD2 93sv. Tight Lines!!
You can add me too that list. Really appreciate your videos, I’ve learned more from you and Richard gene than anyone on the tube. Looking forward to your sidevu episode!
Good morning Davis
I recently subscribed to your channel. Love your videos.
I purchased my first lithium battery and charger. My battery has the spade style terminals. Do they make “marine grade” female spade terminals for wiring? I’ve watched several videos online and they recommend running 10 or 12 gauge wire and to use marine wire. They always show wiring up to a full size battery and using large terminals. 10 or even 12 gauge wire is good size and Im concerned finding terminals that will fit the terminals on the small lithium battery. Any info or help on this would be greatly appreciated. Thanks
They do make sealed spade connectors for that type of battery amzn.to/49cjiZL
Great video, thank you
Where is the best place to mount the transducer and livescan?
The regular transducer is normally mounting on the transom (typically starboard side of engine) or the trolling motor. The livescope transducer can be mounted on the trolling motor shaft or you can order a seperate pole to mount the livescope transducer and place it anywhere on your boat.
I notice you also have the GPSMAP 1022 is this one better then uhd2 or is it for videos
No, the gpsmap 1022 has the same pixels but it does not have sonar capability (no sidevu/ downvu) other than a livescope connection. If you're looking for a livescope only screen the 1022 is a great option, but if you want to use mapping and sonar (sidevu) then the 93sv is the way to go
@@FloppingCrappie I would like to know is the 93 uhd2 screen as good has the 1022 when it comes to livescope knowing that the 1022 have a faster processor
@daviddincler7494 I honestly can't tell if there is a difference in processing speed between the two units. I used the 93sv for with livescope for a few years before getting the 10-inch screens (1022 and 1042). All three units keep up with real-time images (no lagging between what your lure is doing vs. what you see on the screen. If you have the budget, I would recommend either the 1022 or 1042 due to the touch control knob (zoom feature/gain settings) and slightly larger screen.
Thanks
Oops,I guess it can
With that technology why would you use anything other than your fingertip
Great video Davis. A few months ago I bought a new 94SV. This video series is going to help me a lot! Thanks much!
I've not had a good experience with this unit. I have no doubt it's very capable....that's rarely a problem these days. But, it's one of the most unintuitive pieces of gear I've purchased in quiet a while. It was a VERY strong recommendation from my mechanic. I've been out of the game for a while, and didn't know what the "best on the market" was. I could care less about Forward Facing Sonar. I'd like fundamental down or side imagine capabilities, and depth/contour charts. That said, I also had to purchase a $200 addition to be able to see the lake graphs for Florida. But, I digress...
What I want to know is when pulling up the maps/charts after downloading, and registering the Navionics package, for my area....why can't I see the depth contours of the various lakes (Florida in my case). I only seem to be able to see the contours of the few lakes I've actually been on. I tried pulling up Okeechobee, and Toho, and it showed nothing (as far as contour graphs go). Do you know if there's an explanation for this? Thanks.
Just got this fish finder and this helped look for more videos. God Bless David
so these menus are for the newer model of Echomap? Mine is 4 years old.
The adjustments/options are the same, but the menu setup might be slightly different.
I really like this unit unfortunately in Canada it retails for $1600 at Cabelas...
I would like to get this as a 2nd screen to network with my 102 but its pricey.
This is the new meniu on this 😊 but i love old menyu display,i tray too spek with garmin haw too exchand this..but is imposible too change in implament in new design😅
A dedicated Lithium Battery is the way to go and solder all connections covered with shrink tube👌.
If i didn't already have my 1222,Id get this unit for this price👌
Lithiums are a great upgrade for a clean power source.
I have a question When you see something on your side imaging Where is it located at in reference in the water, since your transducer is on the back of the boat, when you see this on your screen, you’ve already passed over it, do you have to cast behind the boat
How to connect it with my Minn kota?
@@andrey4215a garmin echomap can only connect to a garmin trolling motor
There are 2 controls for depth, plus/minus buttons and the drop down from the middle of the screen. I want one of them to control brightness like in the previous version. Any ideas? Thanks for the video, waiting on the next ones.
Great explanation of the unit
👁️🪶👁️
Is gt56 worth the extra money? Most lakes where I fish are no deeper than 100 ft
My Pro Team 175 doesn’t have room for a third battery. If I were to purchase a 3rd battery how big would I need to get if it is solely for the Garmin? I have a couple compartments in the back of the boat that may fit another battery if it isn’t too large. Any suggestions would be appreciated.
If you get the 93sv (no livescope), you will be able to run a 12ah lithium all day. The 12ah lithium I use for ice fishing are made by enduropowerbatteries.com. dimensions are roughly 6x4x4. If you run a livescope I would recommend a 24ah to 36ah battery. These are still much smaller than a normal 100ah boat battery.
And if I got a acid or gel battery I would just double the ah because of the 50% rule?
@@jimkaminski871 ya, that should get you close the power supply you would need
Thank you sir, depending on the cost I know lithium is the way to go but I’ll need to research a little. Thanks again
Love the videos! 🙂
@@jimkaminski871 the 12ah lithium I use for ice fishing is $99.00
Good video,can I hook the livescope to it in the future
Yep, both the livescope (lvs32) and livescope plus (lvs34) are compatible with this unit
Excellent,ty for info,keep up the good videos
Live view , can the direction be changed or always left to right ? I have this on a kayak just bought it but can't grasp where it is
When you say "live view" are you referring to the 2d screen?
@@FloppingCrappie yes
@@Trump2024musthappen the 2d screen will always show data from right to left across the screen. There isn't a way to change it
@@FloppingCrappie it's weird but Ty . Rather see something as it is .