I created a digital architecture model, this is how!

Поділитися
Вставка
  • Опубліковано 17 січ 2025

КОМЕНТАРІ • 76

  • @ShowItBetter
    @ShowItBetter  2 роки тому +1

    Thanks to Milanote for sponsoring this video! Sign up for free and start your next creative project: milanote.com/showitbetter1222

  • @INceptor24
    @INceptor24 2 роки тому +39

    I just love your maquettes. It’s a thing that everyone can put in their portfolio, competition board.

    • @ShowItBetter
      @ShowItBetter  2 роки тому +1

      Thanks! It actually is. It really gives a different feel to the presentation when you see maquettes instead of a ton of renders

  • @NHSSHINOBI
    @NHSSHINOBI Рік тому +8

    I have no prior knowledge of V-ray, but I downloaded it today to do this tutorial. I managed to replicate a similar, simpler model to yours by following your instructions. Everything went smoothly, Thank you so much for providing this tutorial.

  • @tiramisu3554
    @tiramisu3554 2 роки тому +6

    Currently working on my portfolio for grad school and saw this video in my recommended. I hated how the photos I took of my physical model turned out so this tutorial is perfect! Thank you

    • @ShowItBetter
      @ShowItBetter  Рік тому

      cheers nene! good luck on that portfolio!

  • @alexandrianautocruiser8024
    @alexandrianautocruiser8024 2 роки тому +7

    That was extremely impressive! :D Thank you for the inspiration.

  • @beyzayuncuoglu
    @beyzayuncuoglu 2 роки тому +3

    Awesome content as always. Much appreciated! 🙌🏻

    • @ShowItBetter
      @ShowItBetter  Рік тому +1

      thanks for the love! it means a lot!

  • @bartbliek469
    @bartbliek469 2 роки тому +4

    Nice tutorial, I like how quick this was to do. If given more time, I would probably have separated the geometry of the facade into its own objects, to enable the use of displacement textures. That would allow you to enhance the 'imperfections' but that also takes a lot more time.

  • @alaindezii4445
    @alaindezii4445 Рік тому

    I ve tried that technique myself using Podium SU ...I like the imperfections good idea. Thank you.

  • @SK8Wizard735HK
    @SK8Wizard735HK 2 роки тому +1

    This information value millions

  • @ricardoportuguez4807
    @ricardoportuguez4807 Рік тому

    Wooow! Very nice work! 👍

  • @johncharalambous8970
    @johncharalambous8970 10 місяців тому

    Nice video, thanks 🤘

  • @N_mais_Arquitetura
    @N_mais_Arquitetura 2 роки тому

    Just for milanote, the video was worth it!! But all the content was amazing! Thanks for another great video!!!

  • @othmaneer-refaly9216
    @othmaneer-refaly9216 2 роки тому

    I love this ❤

  • @lauraeli237
    @lauraeli237 2 роки тому

    This is fire 🔥

  • @adeonnn
    @adeonnn 2 роки тому

    learn a lot, thank!

  • @abdihakim4634
    @abdihakim4634 2 роки тому

    perfect as always
    but still waiting that lumion version !

  • @adoyer04
    @adoyer04 2 роки тому

    so you made also one of these videos. congrats. like two yours too late when yt spreaded those videos everywhere.

  • @kowshikprasad5556
    @kowshikprasad5556 Рік тому

    THANK YOU SO MUCH, CANT THANK YOU ENOGH

  • @lydiasofia92
    @lydiasofia92 Рік тому

    Beautiful digital maquette! I did not understand how you could model the table without it being cut too by the section though..

    • @ShowItBetter
      @ShowItBetter  Рік тому

      thanks! it's because it was all made inside groups and components. You have to group and place in component the building, and outside of it all, you can model the table

  • @ekechiagozie9364
    @ekechiagozie9364 6 місяців тому +1

    Can it. Be done on enscape too ?

  • @Coisiniiiiii
    @Coisiniiiiii 6 місяців тому

    Yes, I saw the video "Building an 11-story building in 28 hours" was rendered with UE5.

  • @thearchistudent8180
    @thearchistudent8180 4 місяці тому

    wow! you want me too come back to sketchup ✨✨❤❤

  • @hilsmarie_
    @hilsmarie_ 4 місяці тому

    Can you please show the full step of how to the make the groups and and then make the Different sections, I was a little confused, it still changes when I make a new one. What am I doing wrong ?

    • @ShowItBetter
      @ShowItBetter  4 місяці тому

      the most important thing is to make sure each time you create a section, you create a component and group it. After this you can create another section on top of it.

  • @peterdesigns
    @peterdesigns 2 роки тому

    I'm going to adapt this technique into a Blender3d workflow and see how it goes!

  • @johnmorrison_architect
    @johnmorrison_architect 2 роки тому +1

    Great video Steven! Do you know how to model the table and back wall in revit so that they do not cut when using the section planes?

    • @ShowItBetter
      @ShowItBetter  2 роки тому

      Thanks John! Not really. I understand that you have to edit certain parameters within each furniture family in order for it to be visible when using the section plane. But probably the channel Balkan Architect can have a more specific answer

  • @dansnofrills4824
    @dansnofrills4824 2 роки тому

    great tutorial! what tool set do you have at the bottom of your window?

    • @ShowItBetter
      @ShowItBetter  2 роки тому

      thanks! It's the 1001 bit tool plugin

  • @DesignWithNazir
    @DesignWithNazir 9 місяців тому

    Sir which software are uses for design 3d model ?

  • @ulisesibarra655
    @ulisesibarra655 Рік тому

    I didn't get that part in which you are doing the cuts and hiding the rest of the building. When I try it it hides all of the building, not just the part am cutting. And another thing is, when i render on vray, the cut affects the scenario too, son i don´t get those maquettes like the one you got there. Could you explain please?

  • @niyatibahuguna1708
    @niyatibahuguna1708 2 роки тому +1

    Sir can you do the same tutorial but with using lumion rather than v-ray?

    • @ShowItBetter
      @ShowItBetter  2 роки тому

      thanks for the suggestion!

    • @adoyer04
      @adoyer04 2 роки тому

      really? what for? for content? its much easier...

  • @kO-tj7et
    @kO-tj7et 9 місяців тому +1

    are there any way to export RENDER ID in using REVIT or some rendering software?
    i'm sutudent now but it's little expencive to buy V-Ray license.

  • @atonicatonic423
    @atonicatonic423 2 роки тому

    Hi Steve. Do you know any groups that holds competition free for all? W/o entrance fee?

    • @atonicatonic423
      @atonicatonic423 2 роки тому

      I wanna hone my skills, i lack a tons. Also do you still do critics?

  • @Jade-rp7no
    @Jade-rp7no 4 місяці тому

    hi, how did you get the render ID layer please? thanks a lot :)

    • @ShowItBetter
      @ShowItBetter  4 місяці тому

      when you export from vray, there is an option called render channels where you can select the render id

  • @jkdesign9513
    @jkdesign9513 Рік тому

    How does my model look way worse after the very first step lol you did a great job 👏

  • @Orthodoge
    @Orthodoge 2 роки тому

    Will Sketchup Pro work for doing traditional architecture design models?

    • @ShowItBetter
      @ShowItBetter  Рік тому

      a lot of people use Sketchup for everything! It really depends on your workflow!

  • @axelsmets7819
    @axelsmets7819 2 роки тому

    which version of sketchup are you using? im an architecture student and want to use sketchup but i cant render on the free version

    • @TommyTom21
      @TommyTom21 2 роки тому

      Most likely the studio version, it’s $55 a year for students.

    • @ShowItBetter
      @ShowItBetter  Рік тому

      yep!

  • @kato-vu4xc
    @kato-vu4xc Рік тому

    hii could you explain how to connect Sketchup and 3Ds max that way? i have to import and export models for rendering but as i understood you can do it in sketchup so could you explain how?BTW thank you for the video it was so impresive especialy for first year Archi student

  • @NamHoang-wh8gh
    @NamHoang-wh8gh 2 роки тому

    how can you export color selective files through photoshop like that, can you show me?Thank you so much....

    • @ShowItBetter
      @ShowItBetter  Рік тому

      you mean the render id that is in vray?

  • @rodfarid2056
    @rodfarid2056 Рік тому

    This is so cool I hate VRay though :/

    • @ShowItBetter
      @ShowItBetter  Рік тому +1

      haha why?

    • @rodfarid2056
      @rodfarid2056 Рік тому

      @@ShowItBetter mainly due to the render times, I'd rather use Enscape or Lumion and enhance it in Photoshop

  • @frankgrimes2679
    @frankgrimes2679 2 роки тому +8

    It looks nice until you zoom in. You can see the grain of the wood is not realistic. The materials are "too perfect". And the edges are perfect 90 degree angles.

    • @ShowItBetter
      @ShowItBetter  2 роки тому +1

      completely agree Frank! I could spend some more time on the model to make it look more realistic! I also should have rounded the corners with the Fredo plugin and looked for higher resolution textures

  • @jierngn
    @jierngn 2 роки тому +1

    can you share this model file?

    • @ShowItBetter
      @ShowItBetter  2 роки тому

      Hi Jinee! At the moment this file is not for sale, but maybe in the future I'll make them available :)

  • @liliyardan
    @liliyardan Рік тому

    Does anybody know how can I download vray crack for SketchUp. I researched it but couldn't find any download link??

  • @flakakelflakakel7266
    @flakakelflakakel7266 2 роки тому

    yea sketchup vray ending in photoshop to work pixel by pxiel. Yea thank you chaos for developping vray for sketchup only for cash. What a f
    joke