You are correct about the cameras. However, I have a 2023 KRX1000 Teryx4 ES, I bought in December. I shelled out the crazy money and put in the Interactive Display. It will switch and bring on the cameras automatically in forward and reverse and has other nice features. The GPS works ok, but the maps are very old and there are no map updates as of now. Just FYI . I took your advice and used the elastomeric tape as you did. I enjoy your videos!
We used the existing rear bolt holes. The front we used the 2 outer bolt holes, they are are used for the 4 or 6 point seat harness. We took a piece of metal and welded it to the brackets. If you would like a picture or two please provide your email.
The holes are about 2 and 1/4 inches from the existing seats holes. Going towards the center console and then to the door. I thought the cab seal kit has those cut out, because we covered them with come tape to help finishing sealing it. When you go to do it, please let me know if you would like pictures. We can also try to post a small video on it.
next thing I would get is some harnesses and a cage. if you're talking about running sticky tires you might be riding hard that cage and those harnesses aren't going to save you when you go over
I don't know if you leave the windshield on all time or you can take it off, but in the summer we have the fold down type very nice to have the air flow when slow trail riding, but with all the insulation you've done summer heat may not be a problem, by the way that's a good looking machine I hope we run up on you all at windrock sometime that would be pretty cool
We always leave the windshield on because of going through all the mud and water, and yea with all the insulating heat isn't really a factor. Yea that would be cool 😎 ride safe!
Its basically just stuffed in there. I did take apart that plastic piece around the shifter and then put the plastic piece over top. It does not come out without removing the plastic cover. Hopefully that makes sense.
I liked my Polaris a whole lot better. I am disappointed in the Kawasaki, i.e. noisy suspension tons of dust extremely loud engine noise, especially when it’s cold and heat in the cab. I bought the 2023 ES.
You are correct about the cameras. However, I have a 2023 KRX1000 Teryx4 ES, I bought in December. I shelled out the crazy money and put in the Interactive Display. It will switch and bring on the cameras automatically in forward and reverse and has other nice features. The GPS works ok, but the maps are very old and there are no map updates as of now. Just FYI . I took your advice and used the elastomeric tape as you did. I enjoy your videos!
I would love a video of the seat mod !😎
We have one out! Its called "We made our chairs Removable, this is how! Bonus Video!" Go check it out!
I like your seat mod. What did you do to bolt down in the new locations?
We used the existing rear bolt holes. The front we used the 2 outer bolt holes, they are are used for the 4 or 6 point seat harness. We took a piece of metal and welded it to the brackets. If you would like a picture or two please provide your email.
@@rayneventures6991 Thank you. I don't see those holes, must be under the cab seal kit. I'm going to do that mod when I get a chance.
The holes are about 2 and 1/4 inches from the existing seats holes. Going towards the center console and then to the door. I thought the cab seal kit has those cut out, because we covered them with come tape to help finishing sealing it. When you go to do it, please let me know if you would like pictures. We can also try to post a small video on it.
next thing I would get is some harnesses and a cage. if you're talking about running sticky tires you might be riding hard that cage and those harnesses aren't going to save you when you go over
Good job , where did you get the shifter boot ?
Thank you! We ordered it off of amazon!
I don't know if you leave the windshield on all time or you can take it off, but in the summer we have the fold down type very nice to have the air flow when slow trail riding, but with all the insulation you've done summer heat may not be a problem, by the way that's a good looking machine I hope we run up on you all at windrock sometime that would be pretty cool
We always leave the windshield on because of going through all the mud and water, and yea with all the insulating heat isn't really a factor. Yea that would be cool 😎 ride safe!
is the gear shifter boot attached underneath the console or just stuffed into the gear shift assembly?
Its basically just stuffed in there. I did take apart that plastic piece around the shifter and then put the plastic piece over top. It does not come out without removing the plastic cover. Hopefully that makes sense.
I liked my Polaris a whole lot better. I am disappointed in the Kawasaki, i.e. noisy suspension tons of dust extremely loud engine noise, especially when it’s cold and heat in the cab. I bought the 2023 ES.