Just got the dragster from my dealer today. Also Pablo u may want to try and see if you can get the extra badge's for your box. Take them sand them a bit and see if your local body shop can get them painted purple for you.
@@DerAngriffI agree with both of y’all. I’ll ask again on this Mac tool box truck. If I can’t get them I’ll look into a wrap or a paint job for them. Appreciate the suggestions!
Mike with the throwback reference to Gatorz! Used to be a staple of any McLea’s Tire front counter sales display. Great videos, Pablo. Keep ‘em coming!
Around 18in. It goes on these rails that are included with the macsamizer. The box has hold with a nutsert inside. However definitely run a tap through because the threads are covered in powder coating.
Pablo, I recall you mentioned you wanted to replace your multimeter. There's a Mac bogo flyer with amp clamp. Is that the multimeter Mike got? Is the bogo a good deal?
Every shop has an Allen, we had Harold, Harold always saw the very bad side of good things, If you were losing everything and won a saving lottery he would say something negaive LOL.... Lighten up Al... Dont live like a cheap wrench on an important job!
Stanley B&D should just get rid of mac branded dewalt powertools and offer different color dewalt on the truck. Exclusive to the truck, it will sell like hot cakes. like aways it's hilarious to see mac dealers selling Milwaukee, a direct competitor to stanley B&D.
Nobody warranties Mountain wrenches around here. Have to replace the broken ones with Snap-on or Matco. I bought the cheap blue harbor freight battery charger. If battery is dead, it won't work. You have to jumpstart this battery charger with another battery if voltage is below 6.8v. Some sort of safety feature. This thing is pure junk. I had the Mac Tools green battery charger, the smart type charger. It works but took 16 hours to "restore" the battery to 100% it said. This one works but 16 hours and all sorts of restoring refreshing and testing and very little charging, 16 hours is crazy amount of time so I don't use it anymore. Smart battery chargers suck. If you want a good battery charger like the old transformer type, the Associated old blue roll around type are still out there but almost a thousand dollars for an old school battery charger. This is the sort of crap government regulations cause us to deal with. They screw up everything from battery chargers to refrigerators and get this water saving washing machines computer controlled bullsht. Last two years then you toss it in the dump and buy another one. Lithium jump starter, the Snap-on I paid $300? Worth every penny. Has override to jump off dead batteries. Called Micro Lithium jump starter, never failed me. Had it 3-4 years. Jumpstarting battery chargers wtf, it's time for me to retire and get out of this business.
Just got the dragster from my dealer today. Also Pablo u may want to try and see if you can get the extra badge's for your box. Take them sand them a bit and see if your local body shop can get them painted purple for you.
Yes. This would work and would look deadly. Alternatively, what about 3M wrap vinyl? Paint's better though.
@@DerAngriffI agree with both of y’all. I’ll ask again on this Mac tool box truck. If I can’t get them I’ll look into a wrap or a paint job for them. Appreciate the suggestions!
Mike with the throwback reference to Gatorz! Used to be a staple of any McLea’s Tire front counter sales display. Great videos, Pablo. Keep ‘em coming!
lol! I did not know that. Appreciate the support! More videos to come!
Awesome tour time Pablo..can't wait to see the box truck..
I agreed i have never seen Mac toolbox truck
Thank you! Me too! I can’t wait! It will be awesome!
Good luck on the raffle Pablo the screwdriver rail looks inconvenient go to a wrap shop and have them make a piece to cover your badges 👍😎👍
Love the video keep it going
Thanks! Will do! Appreciate the support!
How much for the knipic plier set?
i wanted to see how u install impact holder on toolbox and how wide the bolt hole is?
Around 18in. It goes on these rails that are included with the macsamizer. The box has hold with a nutsert inside. However definitely run a tap through because the threads are covered in powder coating.
I'm sure you can get a "skin" made for your badges, thanks again for great post!
I definitely think so. I should look into it. Appreciate the support! More videos to come!
Phew thought we werent getting a truck video today
We will get a bonus! The second Mac video will come out Sunday!
Ok Pablo, now you have to hold a Car Garage Summit and if you bring peace between Allan and Mike you'll get the '"SNAP ON Peace Prize: One Plier"
I should definitely do that
You should check out the coolant refill kit Mac sells it’s super nice and saves a ton of time
Mac has a sheet metal only truck?! I wonder if Matco will follow. Snap On started that years ago
Correct. Not sure if it’s something new. I will ask them. I have never seen one before. Can’t wait to check it out!
I saw a your vlog where Mac/Justin made a tool box trailer. That is an impressive set up, big investment on his part.
We used to have a huge Mac toolbox plant here in Georgetown Ohio but it closed a couple years ago
Where did it go?
@@Ken-wv2wg allentown penn.-- brand new, state of the art, toolbox plant
@@mikethetoolman8776sweet! That’s awesome
Pablo, I recall you mentioned you wanted to replace your multimeter. There's a Mac bogo flyer with amp clamp. Is that the multimeter Mike got? Is the bogo a good deal?
Is that lavender or purple?
Good luck with the raffle
Appreciate it!
Mac’s March flyer 04 had a purple cart in it with a purple badge.
I want that power probe kit so bad
It’s very nice!
Take your badges off and have them powered coated purple or whatever color you want
My dad got a new box it’s pink and purple from his Mac guy and the emblems are purple
Nice! I knew they made purple emblems I will ask again and see 😂
Every shop has an Allen, we had Harold, Harold always saw the very bad side of good things, If you were losing everything and won a saving lottery he would say something negaive LOL.... Lighten up Al... Dont live like a cheap wrench on an important job!
Stanley B&D should just get rid of mac branded dewalt powertools and offer different color dewalt on the truck. Exclusive to the truck, it will sell like hot cakes. like aways it's hilarious to see mac dealers selling Milwaukee, a direct competitor to stanley B&D.
How much was your box
Retail 3899 bought it new used for 1600$
@@pablosgarage707 oh that’s a steal there I have the us general one and I definitely need a different one lol
Nobody warranties Mountain wrenches around here. Have to replace the broken ones with Snap-on or Matco.
I bought the cheap blue harbor freight battery charger. If battery is dead, it won't work. You have to jumpstart this battery charger with another battery if voltage is below 6.8v. Some sort of safety feature. This thing is pure junk.
I had the Mac Tools green battery charger, the smart type charger. It works but took 16 hours to "restore" the battery to 100% it said. This one works but 16 hours and all sorts of restoring refreshing and testing and very little charging, 16 hours is crazy amount of time so I don't use it anymore.
Smart battery chargers suck. If you want a good battery charger like the old transformer type, the Associated old blue roll around type are still out there but almost a thousand dollars for an old school battery charger.
This is the sort of crap government regulations cause us to deal with. They screw up everything from battery chargers to refrigerators and get this water saving washing machines computer controlled bullsht. Last two years then you toss it in the dump and buy another one.
Lithium jump starter, the Snap-on I paid $300? Worth every penny. Has override to jump off dead batteries. Called Micro Lithium jump starter, never failed me. Had it 3-4 years.
Jumpstarting battery chargers wtf, it's time for me to retire and get out of this business.
mac trucks and isn toolweb will warranty the mountain wrenches
where’s my cesar?