REVIVING A BROKE DOWN ZERO TURN MOWER FOR FREE
Вставка
- Опубліковано 30 вер 2024
- #mechanic #repair #lawnmower
I picked up a Husqvarna zero turn a few weeks ago that would not start or even turn over with the key. Lets take a look at what needs to be repaired on this lawnmower and get it back running good again.
I can't get over how good this engine sounds.
Right!! Incredibly smooth and feels strong. Thanks for stopping by 😎
Those Kawasaki's are a great engine!
You were due an easy one. Thanks again Alex for anther great video. I love the way you detail the equipment after you fix them you even shine up the tires! A good job done well.
Thank you very much!!! I try hard to get them looking the best I can after getting them fixed up. I greatly appreciate the support 😎
no guards on the pulleys?bit dangerous i would say
I agree. I don’t usually like having them like that and I want to see if I can find a set. The only upside to having the guards off is that the grass won’t collect in there, but yes it’s a hazard.
Alex i think a zero turn as nice as that is would easily bring $1500 in today's inflated market. That is less than half of a new one and the hours are not that high. Fully serviced and ready to go, i would think some landscaper would pay that with the Kawasaki engine as a selling point as well! Goodluck Alex. ✌🇺🇸
Thank you Roger. I think I will probably start at $1600 on the market and not take less than 1300 fully serviced. I hope you are doing well and always appreciate your support 😎🇺🇸
Great Video. Thankful I found your channel. You do Awesome work. I liked how you mentioned how much you were plan on selling for. I always wonder how much you would try to sell your mowers for when you finished. Great Job.
Awesome! Thank you! I really do appreciate your support.
I have a 5424 zr. identical with a 24 hp Kohler. Great machine. I paid $1200.00 with 181 hours on the mower and less on the engine. Former owner ran it out of oil. Best mower that I've ever owned.
Heck yea. So far it seems like a great mower. I think the kohler twins are great as well with proper maintenance. Thank you for the support 😎🇺🇸
How do you find these deals man?! I'm trying to find a fixer-upper and I can't find one for less than $500 near me. Teach us how you sourced so many machines!
Could you have just done the bypass with the battery instead of the jumper pack?
Was that a solid wire (as opposed to stranded) that you used to backprobe the starter solenoid connector to start the machine?
Why did the brake safety switch fall out (besides the jolt the deck took) - was the locking tab worn or some other reason? Could you modify it to prevent that from happening again?
I have a 15hp twin and it starts as easy or easier than that one. even after sitting for winter. (Of course I dain the fuel from it but you know...)
I believe that the solenoid is bad or the key is the problem or a bad safety switch
Start the bidding at 1300..I would
You did well on that one. Should bring at least 1200
Very nice outcome. You’ll do well on this machine. Keep the videos coming. They are so informative, and so relaxing to watch.
Thank you very much. I greatly appreciate the support.
Where is this located is this available?
WD 40 on starter make it sound alot better
Deck chutes are a joke they just ball up the grass. I figured lawnmower man would know that
Agreed. I usually don’t run chutes on my personal mowers, but a lot of people still run them to keep rocks from kicking up.
Great job Alex btw u got other utubers following your channel Chris from OHIO gooooooo Buckeyes beat Michigan
You just turned 200 into 2,000$ awesome score!!
Thank you!!! I was really surprised how well it runs and operates. I hope things are good your way. Always looking forward to your videos.
I wouldn’t have known where to start with this machine other than the basics. It starts, runs, turns and cuts well so you have aced it with patience and skill. Anything you get in selling it will be well earned. Thanks for posting a great video!
I got the Topdon BT100 battery load tester and have never looked back. Small, easy to use, fast and does everything I would want it to do at a reasonable price when I bought it a couple years ago. The printed instructions aren't all that great, so I pretty much figured it out by doing, and it's not that difficult, even for me (who had never used a battery load tester before). I highly recommend this one. By the way, I found out about it on Jeremy's MowerMedic1 channel.
$200 - what an amazing deal! I’m seeing beat up ZT’s in my area asking $300-500. I haven’t worked on one yet but that’s my next step up.
I could really use that mower because mine is just old and falling apart. I not only mow my small yard but my neighbors yards as well. And to bad you are so far away. Man I could do a lot of good with that machine.
Selling
Thanks a lot for this one, Alex. I learned a lot more about electrical diagnostics, my weakest area. 🔧👍
I would paint faded with blk paint and touch up the orange paint
Fix it like your keeping it 😊
I actually learned some things. Excellent. The original oil level looked too low to even try running it, but the engine sounded good.
What is a brand you recommend for zero turns? I’ve been debating between JD, bad boy and toro. I’ll be using it to cut 1-5 acres regularly. Thank you in advance!
I had a gravely ztx 42. Its was a great homeowner zero turn.
@@freedommowers420 Thanks Alex! Appreciate the feedback new subscriber to your channel love the videos!
@@davidgarza7134 thank you very much for the support. I would try and purchase from a dealer and not a box store. They are much more helpful when it comes to warranty and repairs.
he spray painted the zero turn deck in orange
Yes
Awesome deal Run so smooth Thank you for the video
That one is a winner for sure. Someone is going to have a good machine.
Awesome find Alex! Not gonna lie I’m jealous. Around here I would def list it for 12 to 1500. Keep up the great work!
Thank you so much. I’m hoping to get 14-15 out of it.
love the vids! quick question, recently painted the back wheels on my mower and i put them back on and now when i spin one back wheel the other spins the opposite way. what did i do wrong?
Thank you. I wonder if when you put the wheels back on they axle key fell out? That would be the only thing I can think of.
Loving the way this Husqvarna zero turn came out nice work alex 👍
Thank you so much John. I was really happy how nice this one turned out as well. Hopefully this will make someone a great mower for a few years.
Great find, especially for the price, I want to borrow your rabbits foot!! 🤣
I do feel blessed. I check the marketplace regularly, and have to move fast if anything comes up.
What did you use on the grey plastics?
I cleaned them with dawn and a scotch brite pad. After drying I used a vinyl/plastic restore spray.
@@freedommowers420 any particular brand?
Nice fix..surprised theres no type of covers or guards on the deck area
There should be, but I’m hoping I can find some as it is a safety hazard.
Lucky you, very lucky find and friend, it’s a keeper for sure 😊😊
Thank you. I’ve got a couple zero turns here and it’s going to be hard to let this one go. It cleaned up nicely.
I really believe it’s the best engine there is now and they last for years if service properly
😊it looks great now
I have always had good luck with Kawasaki. Strong reliable engines with maintenance.
Great mower turned out great and the good was it wasn't too bad to get working nice job u can make a good profit for your time
Thank you very much for the support. I was very surprised how little it took to get this back in good working order. I think it should sell quickly this spring.
Greatg video, great results! Thanks
Thank you very much for the kind words and support 😎
That has to be one of the smoothest and easiest Twin I've ever seen start. That is awesome
Right!! I can’t believe it was such a smooth runner.
Awesome deal! Nice work, it turned out great!
Thank you Kyle. In the future I want to show a little more detail on some things like you have been doing in your videos, but I was really happy with the results on this one. Thanks for stopping by and showing support.
@@freedommowers420 that mower seemed like a pretty simple fix- I think the amount of detail you showed was perfect! Keep up the good work
great job looks good
Thank you 🙏
the engine is worth 200 bucks- good job
Thank you!! Yes the Kawasaki engines go for a pretty good amount of money in my area.
where I live 250 $ for an engine like that@@freedommowers420
Well done Alex😊
Thank you!!