Wow, it's really fantastic project. I love those guages you made from the video, they look so elegant. I wish you were my friend or neighbor so I can borrow the machines from you. 😊👍🥂
I have a similar drill press table as you have in this video, from watching your video I now know why the drill press is not accurate as I would like. All along I thought it was the quill slop, but as I watch I see your table moves down a slight bit as you start drilling. I check mine and it does too, though not as much as yours. I can fix that with an adjustable jack stand. Thank You!
Je to super videt nekoho takhle makat a dostavat se do komunity makeru. Zkus se podivat na muj instagram @mpruseque, taky travim dost casu v dilne. Diky za inspiraci!
+Tom's Dreamshop Worx thank you very much, there was urgent need to have some precission marking gauges due to some other metal working projects I will post in near future.
Hello Michal....greetings from Peru... I just want to tell you that your work was extraordinary..... would you please explain me a little more how did you cut those drill bits to make and sharp the markers
+antonio999us my greetings to Peru. I just fix the drill bit into the aku-drill and grid it on the belt grinder, it's also cooled down by air. This way you make the center point.
Badmin X thats OK, the pencil is also possible, can you send the paypal payment? If yes, than please paypal Eur 65 (shipping inclusive) to kadlk@seznam.cz. Email me also you full contact details, the address and phone number. If paypal not possible, than email me, I will send you bank details. I expected it will be ready for you within 2 weeks. It's suitable to be use also for woodworking projects.
OK if I want to buy a marking gauge I have a choice between an expensive Starrett or a really cheap one by General. Or a nice one from Japan in mm. Someone should make ones with a wider base of 2 or 3 inches for 30 or 40 bucks..
I see the 2x72 belt grinder, Do you plan on making knifes? I think it would be cool, but you can do whatever. Your content is great anyway :) Keep up the awesome work.
+Paul Murray yes, cool idea. Its not very easy to make precission lathe wihout lathe. I can build some lathe toy with my current equipement. Anyway thank you for idea and your comment. I will focus on some old stuff I colected in next episodes.
I would love to have one of those. Nothing beats a piece of equipment or tool that is home made. Thanks for a great video.
Thanks for showing and sharing that, I am looking to make one but no welding
Wow, it's really fantastic project. I love those guages you made from the video, they look so elegant. I wish you were my friend or neighbor so I can borrow the machines from you. 😊👍🥂
Great job. I like it. Keep it up my friend. You just proven that you don't need a lathe to do this. I must say, I like your lernisher.
I have a similar drill press table as you have in this video, from watching your video I now know why the drill press is not accurate as I would like. All along I thought it was the quill slop, but as I watch I see your table moves down a slight bit as you start drilling. I check mine and it does too, though not as much as yours. I can fix that with an adjustable jack stand. Thank You!
+David Schwartz you are right, I also will fix it - buy a new or second hand which is much more better. Stay in touch my friend.
just found your channel as I was doing research for an up coming build project. love your work, subscribed and will be binge watching you for awhile!
Hi Tom, thank you very much for your nice comment.
Bravo ! Very beautiful !👌👌👌
What is the name of your circular drill press clamp? Where can I get one?
Amazon has the cheapest ones I've found at about $88. Its called a 3-Jaw Self-Centering Chuck.
@@carlnaranjo3962 Thanks brother
Very nice! Love the chuck idea
Excellent work. The steps are almost identical to the steps I would use if I made one from wood.
I like Diresta style videos! nice job and greetings from Czech republic!
+Michal Prusek Michale, dekuji za komentar a podporu. Thank you for the comment and support.
Je to super videt nekoho takhle makat a dostavat se do komunity makeru.
Zkus se podivat na muj instagram @mpruseque, taky travim dost casu v dilne.
Diky za inspiraci!
+Michal Prusek urcite se podivam, ten instagram teda zatim neovladam, tak alespon padny duvod do toho proniknout.
Nice project! They look great!
+Tom's Dreamshop Worx thank you very much, there was urgent need to have some precission marking gauges due to some other metal working projects I will post in near future.
Hello Michal....greetings from Peru... I just want to tell you that your work was extraordinary..... would you please explain me a little more how did you cut those drill bits to make and sharp the markers
+antonio999us my greetings to Peru. I just fix the drill bit into the aku-drill and grid it on the belt grinder, it's also cooled down by air. This way you make the center point.
real nice work
Very nice project. Greetings from Argentina!!
+Nico Salomone Roig hallo, my greetings to Argentina and thank you for the comment. Its a big support for me
Beautiful work my friend.
+Opa's Workshop thank you, there was urgent need to have couple of that.
This is such an amazing work, congrats! also great video!
You are very skilfull. I'm wondering what it would be like if you had a lathe.
Congrats.
+Amilton Almeida Jr thank you, hope to have it soon.
10:22 - What is the tool?
A cordless drill for the rotation, an air gun for cooling and a belt sander. That's pretty much it.
Splendid Sir, well done...
They look great.
It is difficult to work without a lathe.
somebody give this man a lathe.
+OneOriginalName yes please :-)
OneOriginalName : looks kind of urgent too ...
Maybe he doesnt like milk in his coffee
Beautiful end
عبدالعزيز المناعي ,
Your drill press bed has a lot of play so your drilling might be slightly off. Nice vid!
+Alexander N you are right, the drill press construction is weak. Thanks for the comment.
100% Она имеет значительный люфт. Это влияет на точность работы.
WOW - super good job - how many €uro coast your gauge ???? :))
+Badmin X thank you so much, I think it could be about Euro 16/Pcs. The rod is stainless steel.
OK fine - i take it all ( € 50.- ) but the middle gauge can used with a pencil - OK ??
Greeting from Germany
Badmin X thats OK, the pencil is also possible, can you send the paypal payment? If yes, than please paypal Eur 65 (shipping inclusive) to kadlk@seznam.cz. Email me also you full contact details, the address and phone number. If paypal not possible, than email me, I will send you bank details. I expected it will be ready for you within 2 weeks. It's suitable to be use also for woodworking projects.
Yes :) PayPal is possibility - I´ll send you an email !!!
OK if I want to buy a marking gauge I have a choice between an expensive Starrett or a really cheap one by General. Or a nice one from Japan in mm. Someone should make ones with a wider base of 2 or 3 inches for 30 or 40 bucks..
Would you sell them???
José Ariel Romero de san Miguel de Tucumán Argentina amigo mui buen trabajo excelente lo felicito
Wow a tool maker without a lathe is like a preacher without a church !!!
what to say, should spend $2000 to buy what I wish.
Very nice Work.
I see the 2x72 belt grinder, Do you plan on making knifes? I think it would be cool, but you can do whatever. Your content is great anyway :) Keep up the awesome work.
thank you for your comment, willale some knives, but not only. There are a lot of ideas in my mind and lot of needs fory workshop.
And there is no lathe ?
Not yet.
Beautiful!
é muito bom ter ferramentas..muito trabalho pra fazer um simples graminho
Buenísimo hermano😮👍👍
very good , and thangyou( from thailand . Ayuttaya)
+Jnuttapong J you are welcome, my greetings to Thailand. I Was there in 2011 and still remember for nice moments.
thangyou
Please, can you sell me that? How much cost? I live in italt, thanks
+Vincenzo Ferraioli dear Vincenzo, if you wish I make for 16€/Pcs. My email kadlk@seznam.cz.
velmi dobrý váš produkt!
Hi, do you sell gauge?
Yes, lathe made at the moment, EUR 16/pcs.
ok I want to buy one
Write me to kadlk@seznam.cz I need to know from where you are.
I wrote you but i haven't any answer
olá vc não vende esses graminhos?
Good job
Wonderful and beautiful
Michal paráda. Malý tip (jestli múžu)- místo stopek vrtákú nastřelovací hřebíky do betonu
+Vladko Sitko dobry tip, dekuji!
Profesional man.
sehr gut Arbeit Kompliment
You wouldn't by chance be interested in selling these?
I already sell this fór eur 23/pcs. You can write me to my email for more informations.
muy buen trabajo felicidades :)
complimenti bel lavoro
can you send me one?
инструмент очень хороший но в домашних условиях изготовить сложно СПАСИБО!!!
The Máster potion works properly . This is the secret !!!
+Ramon Campos thank you my friend.
Nice 👍
molto ben fatto. Bravo
Молодец! Удачи тебе!
The obvious DIY project, then, would be to make a lathe. :)
+Paul Murray yes, cool idea. Its not very easy to make precission lathe wihout lathe. I can build some lathe toy with my current equipement. Anyway thank you for idea and your comment. I will focus on some old stuff I colected in next episodes.
Excelente como para vender. Saludos
BRAVO !!!!
Perfect.
Perfect ;)
Perfect,Perfect,Perfect,Perfect... =)
Bravo zio
filmik bardzo przydatny na 5+ Zakup małej tokarki do twojego warsztatu dużo by usprawnił :)
solo decir que es un artista que no es poco
With all the tools you need, suggesting to make a gauge is idiotic. You can buy one for 15$
Poor drill bits, no oil just raw dogged into metal :(
Wow
Muy bueno
get the f..k out of here... :)))
I just love you.
just if you where living in romania.
you are amaizing.
the best job ever!
ok
aj ja chcem jeden :)
+johny fly muze byt, rozjel jsem vyrobu 50 ks.
a cena je cca aka? :)
+Michal Kadlec nechavam je po 16 eurech, tak rekneme 400. Postovne je na me.