Hii, Thanks for uploading the INPA software packages. I just downloaded the recent files. When I want to select Revtor's profile, a message appears saying: Profilversion 2.0 ungültig!. Do you have a fix for this?
Hi, Try manually create NCS Expert Profiles. There are two main programming profiles "Expert mode" and "Revtors" known from internet. How to do that use this tutorials: ua-cam.com/video/wFBaVZXuLcg/v-deo.htmlsi=aUJ9QivnZ0tPUJOB and ua-cam.com/video/0mg4xe5I__k/v-deo.htmlsi=FRs74OG_Hhs81ALw
@@BMWhale thank you for answering. Could you flash ecu DDE 5 to convert in Manuel transmission with team viewer. Engine from X5 E53 M57tu eur3 I swaped my e39 with this engine. Can't start because no signal from automatik gearbox to EWS..
@@BMWhale Nobody can do it here, Really nobody... This country is sh#@t. I'm trying to do it myself, I downloaded from you, winkfp, NCS Dummy,... Juste for this conversion. I Ask your help not for free of course.
Ive installed everthing like you did in the video and changed the com port and latency timer but when i go into INPA it dose not recognize my car the battery and ignition are still off i got a kline cable for my 2004 530i e60 do i need to update INPA somehow?
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Brother I don’t know how to thank you enough, your a life saver, I appreciate you sharing this with the bmw community!!
No problem 👍
Thank you very much, it works perfectly, you are doing a great job!!!
Thank you!
Hii, Thanks for uploading the INPA software packages. I just downloaded the recent files. When I want to select Revtor's profile, a message appears saying: Profilversion 2.0 ungültig!. Do you have a fix for this?
Hi, Try manually create NCS Expert Profiles. There are two main programming profiles "Expert mode" and "Revtors" known from internet. How to do that use this tutorials: ua-cam.com/video/wFBaVZXuLcg/v-deo.htmlsi=aUJ9QivnZ0tPUJOB and ua-cam.com/video/0mg4xe5I__k/v-deo.htmlsi=FRs74OG_Hhs81ALw
🤝🏻 from 🇲🇫
I install it but for ncs expert, only "Default profile" or "NCS Dummy profile" is disponible. 1:20
Is it normal ?
Check again there are more than one profile with the same name. Also you can create or upload your own profiles
@@BMWhale thank you for answering.
Could you flash ecu DDE 5 to convert in Manuel transmission with team viewer.
Engine from X5 E53 M57tu eur3
I swaped my e39 with this engine.
Can't start because no signal from automatik gearbox to EWS..
@@mansouryoussoupov8636 Yes, but I suggest you to seek for local ECU Remaping car repair shop.
@@BMWhale Nobody can do it here, Really nobody...
This country is sh#@t.
I'm trying to do it myself, I downloaded from you, winkfp, NCS Dummy,... Juste for this conversion. I Ask your help not for free of course.
@@BMWhale I have the same problem. How exactly can I add the Expert Mod. Or how do I add profiles in general?
Ive installed everthing like you did in the video and changed the com port and latency timer but when i go into INPA it dose not recognize my car the battery and ignition are still off i got a kline cable for my 2004 530i e60 do i need to update INPA somehow?
Hi, try this also: ua-cam.com/video/EEo9VJT6FWo/v-deo.htmlsi=LiAUmeV0hzqZrs2s
Hello my friend. Can I code the ABS DSC control unit of my 2002 model bmw M54B25 with the ncs expert you shared? thanks
www.e46fanatics.com/threads/diy-code-used-mk60-abs-dsc-using-ncs-expert.1294944/
There is some info about that. To be honest never tried to code it. But i looks like it is possible with NCS expert
Where is the NCS profile?
Did you mean all profile files which NCS expert loads from. According this installation all profiles are located in C:/EC-APPS/NCSEXPER/PFL
Hello bro does this cable work with e70 2010?
On E70 never tried, but according forums info should work