UAD No Devices Found
Вставка
- Опубліковано 25 сер 2024
- If you see red "No Devices Found" text in the UAD Meter, your computer is not detecting your UAD device(s). This issue can have a number of causes, such as a faulty connection between the device and the computer, a problem with UAD software installation, or an incompatible computer system. The troubleshooting suggestions below address these possibilities to help you get up and running with your UAD device(s).
You are a life saver. I usually have bad luck with all these types of videos but for once I've achieved success thanks to you. 🙏🙏
THANK YOU!!!!!! This been driving me crazy past 48 hours and I couldn't find much info. You literally got me up and running again in minutes.
Great video, hope this worked for you guys....as for me, my issue was a simple mistake. Long story short, make sure you have the correct cable that is not included (UAD-2 Satellite). Mini Display and Thunderbolt 2 look exactly the same. I was using a mini display cable, got a thunderbolt 2 and issue fixed. I know a lot of you would know what cable is needed, but there are people like me that had no clue. Hope I could help as well. Make sure it is a Thunderbolt 2 cable and NOT a Mini Display. 👍🏽
Hey Danny - this was amazing, you're awesome, thanks!
Wow this just happened to me... Because of this video, I ended up Uninstalling, and Reinstalling directly from the UAD website. Now everything works again!
I wonder if this will happened because I upgraded from Big Sur to Monterey? Oh well, thanks for the video!
HAVE YOU GUYS TRY SWITCHING ENDS OF THE THUNDERBOLT CABLE ?
God bless you this worked for me
Catch 22 Beats it happen to me and also a hard reset make its work almost every time it doesnt erase anything pretty simple just an extra option but they already mentioned before stay up just incase anyone wants to listen to my music its in spanish lol 🔥🔥🔥 fire flows tho 😅😅 m.ua-cam.com/channels/L22nr4-rwSJmT5E40fcOIQ.html
This worked for me, I love you :*
Underrated comment
idk who u is but you the Goat
I TRIED EVERYTHING and it didnt work until I turned the apollo on before i started the computer and IT WORKED! FUCK YEAH
Thanks a million. Got me working within 10 minutes!
I uninstalled and reinstalled my UAD but in privacy it doesn’t show what you spoke about allowing to accept or trust the download.
I checked if with in the recommended 30 mins and nothing indicates that
Exactly what I'm dealing with.
did you happen to fix the issue? i am having the same problem.
@@nickderdak4527 Chiming in here...only thing that worked for me was to finally downgrade back to High Sierra, and then move one OS up to Mojave. Took two days, but it was worth it.
Mine just suddenly started working fine on its own. Idk what happened.
I’m guessing the the updates caught up with eachother.
RooTz-Staffords I just updated my uad and now it’s not working I wonder what I should do?
Thank you, this was it. I was loosing my mind. 🙏
Lucky (hopefully) to find this video as I have tried everything UAD suggested and many times the UAD device is not found. My problem started after a firmware update done around Oct 2019 and since then the UAD Apollo Twin has not always been detected.
I will try this and reply back with my updates.
rickhorvath im having the same issue since updating apollo's firmware!
Italo Luciano Ferro UA sent me a new unit which I am hooking up today. Hoping it will work. Maybe you could send yours back to them and have some luck?
Thank you much for making the video. Worked for me! Tried lots of thing but this worked.
You just saved me so much time! Thanks man
i did all tis process and i don see 'allow uad... ' at system preferences..
COSTAS EXARHOS exactly
COSTAS EXARHOS did you figure that out?
On my Apollo Twin solution was to disconnect all cabels turn off pc and reset the card by holding a second from left and second from right button and at the same time click and hold a jog in the middle. While you hold those three things turn on the card and continue holding for 10 sec. Turn of the card reconnect your thunderbolt cable to the Mac and turn on the computer and then turn on the Apollo again. Voila.
Same here. I don’t see anything after proper uninstalling/reinstalling allowing UAD at all in setting and privacy in system Preferences.
You saved me youngsta thanks for the video
OMG !!!! Thankkk You Brooooo It Worked
i Was Having Problems Connecting My Apollo Twin X
And You Helped Alotttttt Thanks So Much Bro God Bless.
Hey, Man.. I’m having a bit of a problem understanding what he’s saying and I’m having the same issue with my twin x. Could you maybe help me out and walk me thru what you did?
@@blaker4807 have u figure it out? I'm having the same issue with my twin x also
John Kealiihanahulu Kealiinohomoku Kekolu - III Yeah, Man. I did figure it out eventually. I did exactly what he said in the video and I reset it and I made sure every thing was plugged in right, but I’m not sure exactly which one actually got it to finally work. First, make sure you have the stuff plugged in right. I know it sounds silly, but I made that mistake at first. Make sure the lighting bolt is facing up, or if you have an iMac, it’s facing to the left. What all have you done so far? Have you reset it?
@@blaker4807 ive uninstalled and reinstalled 3 times. bought new thunderbolt cables, reset the device
@@blaker4807 yeah I have the thunderbolt set up right also
Unfortunately this did NOT work for me. Still showing 'No Devices Found'. After literally MONTHS of dealing with UAD tech support via ticket and phone, sending unit back, finding it was stained by someone at UAD - not during UPS transit, getting unit back - UAD support still claims it's a faulty Thunderbolt Cable, but I've tried several and still no luck. I've even tried connecting the Apolloa to my Macbook but get same result. Seems there's something deeper going on here noone can explain.
I just bought the UAD arrow for a week, first time I plug it to my macbook pro it work normally, I can register the hardware and test plugins on the UAD console . About 10 minutes the UAD arrow LEDs has a shutdown, I don't know why? I disconnected an arrow and reconnect it again, the LEDs did not show up and in the UAD meter doesn't found device. I had tried to reinstall uad software but it still didn't work.
Vilavong PHARAGNOK I sold my new replacement Apollo a while ago. Problem solved
@@rickhorvath Great piece of S of software. No real support
Safed our session goat!
I've recently had this issue. I've tried every imaginable suggestion from UAD and still cannot get the device (Apollo Twin MKII) to connect. Suggestions??
Me neither. Os Catalina?
@@joseantonioaguerocabello4396 Same here. OS Catalina..
@@joseantonioaguerocabello4396 same.
I’m having major issues with my Apollo X8 and Luna UAD with MacOS Catalina!!! Random crashes, no playback on monitors or headphones. Once Mac detects my interface nothing loads up
@@MonoRec88 same
thanks for your effort
THANK YOU!!!!! This worked!
For all those reporting the 91 error code.it is not hardware failure. Unplug the second UAD device. Your hardware starts working, right yup. It's not cables or the second device, right! It's not drivers right, check! It maybe multiple accounts. If your using two devices and have them registered to more than one account. It's probably, that UAD has failed to ask you in each account to cross reference your email addresses so the software will combine accounts and plugins during a session. That's my bet, but who am I so ask UAD
THANK YOU VERY MUCH!
Worked for me, thanks!
God Bless You Saint!
I love you !!! Just that
my computer won't let me delete those files. any suggestions?
Same here. I also don’t have the security & privacy window 😡. I’ve had the Apollo twin 1st gen thunderbolt forever. I’m not giving it up because they’re doing to much with the system compatibility
Hello mister. Looking for a solution to the problems with the Apollo Twin X Duo, I came across your videos which gave me a glimmer of hope... Can you give me some advice. I'm using Universal Audio on Windows *Laptop Predator Helios 500, Intel i7 8750, 32 GB ram, ssd 3500 mb/s, GTX 1070, Thunderbolt 3 x 2*, the drivers were fine until I restarted the laptop and everything went bad... Any advice please. Even when I get to the option to register my product, it's like the cable isn't inserted...?
BTW my Cable is TB4 and TB3 supported
my fix was turning on the interface before the computer to get it to recognize
Thanks so much!!!!!!!!
I had this happen to my PC I had to reinstall windows 7 professional, and when I loaded the software for My UAD Apollo Quad and tried to use it, I got an error "no device found" after working with this for a few weeks and no one had an idea of how to fix. I found that my new install of windows needed to be updated with windows updates, First what was stopping the UAD interface from working was Windows did not like the Driver signature authentication for the UAD software Until I allowed windows updates to complete. Until that point, I had installed the software and drivers anyway by using the F8 key hit repeatedly at bootup until you get a screen that looks like DOS and at the top, it says "fix this computer", Scroll down to the bottom of the list there is a line that says bypass driver signature authentication. click on that and hit enter. The computer will boot but next time it will look for the driver signature as always. But this allows you to install the software with the bad driver. But when you use the program that uses that driver you have to hit F8 each time to bypass the driver signature authentication. But with my new install after I let all windows updates complete the software would install the drivers were good all along but the windows install needed to be completed. But I found also that I had to ad the software for my interface had to be added to the firewall ok list of programs to let through, then the interface began to connect through firewire. But in short, my problem all along was I was not patient and did not let windows do all the updates, many parts of software need the extras that come in windows updates to run. I hope there is something here that will help someone this problem really sucks! *** More things you might run into with a PC and Appollo Quad and windows. I bought my gear at Sweetwater Music they have a tech department that is very good they were a great help when I found at the end I had everything running but no sound? When UAD software installed it installed as default for the console to look for the headphones, not the main out. So I had no sound. it was going into the control room area in a console and clicking main instead of headphones. this part was diving me crazy because it just did not make sense to look for it. Also, I found that Protools would not connect to The quad if the sample rate was different in the Protools file you are trying to load I.E. In the past I thought I could save bandwidth by setting the sample rate at 44.1 and bit rate at 16 as a CD. Well, that was ok till I reinstalled ProTools which defaults to 48Hz and 24bit so when I loaded a Protools file that was 44.1 16 bit Protools could not connect to the Appollo quad. you can bypass this by creating a blank file at 48Hz 24bit and Import the file information and everything which is the first option when you import this brings in everything so your 44.1 gets forced to become 48 Hz 24 bit. then you can edit your old files. And your Appollo Quad will then start activating your firewire interface.
have the same issue, at the moment i am doing what you suggested
@@nikosarkomanis I bought my gear at Sweetwater Music they have a tech department that is very good they were a great help when I found at the end I had everything running but no sound? When UAD software installed it installed as default for the console to look for the headphones, not the main out. So I had no sound. it was going into the control room area in a console and clicking main instead of headphones. this part was diving me crazy because it just did not make sense to look for it. Also, I found that Protools would not connect to The quad if the sample rate was different in the Protools file you are trying to load I.E. In the past I thought I could save bandwidth by setting the sample rate at 44.1 and bit rate at 16 as a CD. Well, that was ok till I reinstalled ProTools which defaults to 48Hz and 24bit so when I loaded a Protools file that was 44.1 16 bit Protools could not connect to the Appollo quad. you can bypass this by creating a blank file at 48Hz 24bit and Import the file information and everything which is the first option when you import this brings in everything so your 44.1 gets forced to become 48 Hz 24 bit. then you can edit your old files.
@@nathanclay7748 *real time update* everything works perfect now. Thank you so much!
thanks for trying and I'm glad this has helped a lot of people here but nothing for me thus far. Apple Support has no idea how to help with third party software either but thanks
How old is your MacBook send me an email do you have the files
Windows to ?
Thanks, man!
Thanks so much
man thanks for this video
Why multiple accounts. Well certain customers may not want to pay for all that wonderful plugin in goodness, so may have B rooms, some may be using Octos and such as portable on other. Computers. Who knows.
I TRY it now thanks bro
apple told me I should call the people who made the device.
Tengo un problema con mi Apollo, ya lo puedo utilizar para grabar y todo pero el único problema es que no lo puedo registrar a mi cuenta de universal audio para activar mis plugins que adquirí espero y me puedan apoyar en eso gracias
Appreciate it
My mac wont let you delete the extensions any way around that
Dave DeBerry Re-install your software meaning computer don’t for get to backup
On my Apollo Twin solution was to disconnect all cabels turn off pc and reset the card by holding a second from left and second from right button and at the same time click and hold a jog in the middle. While you hold those three things turn on the card and continue holding for 10 sec. Turn of the card reconnect your thunderbolt cable to the Mac and turn on the computer and then turn on the Apollo again. Voila.
Hi,
When you re install the UAD interface after you deleate it, do we have to go back to the UA website to download the software, in my case, it was a zip file?
Best.
I could not understand anything mate...so after deleting the two items from the library, do i uninstall apollo uad? Or do i just restart it??
Restart
Ive done that but still console is offline. The only way for me to get it online is to keep re installing and uninstalling uad
TEAM-A TV the moment i turn of uad interface, then turn it back on, it goes back to being offline and my imac cannot detect apollo
@@ruigimarquez8846 same issue
@@ruigimarquez8846 did you figure something mate ?? coz i m same trouble here
Didn’t work for me :/
Contact Apple
you find a solution? :o
yeah men u find a solution
Didn’t work for me either. Nothing pops up in setting and privacy to allow..
thanks
Having this issue on a 2015 2k retina, using thunderbolt 2 on Monterrey.
Did you ever figure this out? I’m working with the same Set up
And can’t get ut to work
@@Visualize_time oh and also on their own website chat room there are strings of chat on this subject with the exact model # It's been a known issue for a number of years.
We pay a lot of money for this...solding this shit
make a new video for catalina n ableton
Sorry no can do goodluck ore call apple
what if it hasnt changed thoe
It works ore it doesn't ore upgrade your computer am now using an M1 pro no drama with that one
God send you
Whatever I do my New macbook pro doesnt ask me for permission to allow the software ☺️😒
i bought a thunderbolt 2 cable from amazon and didnt work, they said i had to buy the authentic cable from apple, and it works
This does not work at all with Apollo Twin X Duo. Is there any other solution to this issue?
Check my other video about the apollo X
ua-cam.com/video/p-9rgRmZTww/v-deo.html
ur the got
This actually works
All you have to do is update the software. BOOM
Help me please I can’t do it. It not work for me
Call apple
TEAM-A TV I fix the problem. What I do was, I deleted MacOS Catalina and install (Marcos High Sierra) and everything work perfectly
TEAM-A TV Do you think if I Updated from High Sierra to Catalina I will have problem again?
This was by far the most annoying tutorial ever.
Next time finish eating before you make a video. All that smacking was uncomfortable
Hard to understand u and u are not going into detail I suggest a redo on your video I took 30 mins trying to understand this video so I have to give it a thumbs down