PRL Cobra Intake Install 2017 Honda Civic Si
Вставка
- Опубліковано 12 вер 2024
- In today’s video we install the PRL Cobra intake! I had this intake ordered when PRL released the pre-order. This install was not very hard at all. It took me about 2 1/2hrs to install but that’s with me recording. If you all have any questions about this install please free to ask. I try my best to respond to every comment. Thanks for watching and have a great day!
Buy PRL Cobra Intake: amzn.to/3k8qU7g
▬▬▬▬▬▬▬▬FOLLOW ME▬▬▬▬▬▬▬▬
📸Instagram: @TTorres118 / ttorres1183
👻Snapchat: TTorres1183
📬 Business Email: TTorres1183@yahoo.com
Please watch: "Chemical Guys Foam Cannon Review"
www.youtube.co....
~-~~-~~~-~~-~
** Affiliate disclaimer: some of the above links maybe affiliate links, which may generate me a sales commission. For example, my UA-cam Gear listed above is in association with the Amazon affiliate program and I’m an amazon associate.. "
Nice video! I hope you know that you are many people role model to the new Civic si! But hey I have a question! What’s your top 3 mods to get for the new Civic si?
KTUNER, PRL Cold Air Intake, PRL front and downpipe and then CLUTCH! thanks for the kind words Peter Means a lot!
No! Thank you so much for having an honest video and stay true!!!
That's a good order
Just installed mine an hour ago the sound quality doesn’t do its justice, it’s AMAZING I can’t stop driving around my city taking the long way . 110% worth it
Watched this video a couple times and had it knocked out in about an hour. Great sound, no codes (Street MAF), feels a little snappier. 2021 Civic Sports Wagon, NON SI. Removing the lower pan is the key, the bottom bolt for the OEM intake snorkel was the worst part. Great product, filter is well protected, no hydrolock worries. Thanks for the video. Pro tip: have all the clamps super loose so the silicone tubes can expand over the hard joints. On my 2021 the 4" silicone tube comes close to a radiator hose, make sure you clock the tube to accommodate for this.
If this video gets 150 likes I’ll buy the PRL inter-cooler w/ charge pipes and do a install video!
Time to buy.
Indeed!
This is my second vid and my last 💯💪🏽
I was watching someone else do it but they weren’t really explaining anything like how you were 🙏🏽
Keep it up bro and appreciate the vid it helped out alot last night
Just wanted to say thanks man!!! I installed my prl cobra intake today and your install was a big help. Keep them coming!
Thanks for the support!
Best install video by far, every other video is just dark and blurry. good job!
Thanks you!
I have this intake coming in a few days for my 2018 civic si. I haven’t done any type of mods before I’m low key discouraged. Your video is a lot of help tho!! Much love
You’ll be fine just take ur time!
Very helpful along with PRL’s instructions. Removing skid plate is a must great advice!
Thanks for the video! I received mine on Monday, just waiting on the weekend to tackle the install. This will also be my first mod!! Can't wait!
Good luck man you’ll love the way the new intake sounds. If you have ANY questions please feel free to ask!
Picked up my 18 si new from Honda in sept, and just now installed the cobra intake using your video. Thanks a lot man.
I’m glad I could help!
does it void warranty? I got a 2020 si and im worried about my warranty :(
You’ll be fine
8:20 scared the shit out of me
😂😂😂
24 minute video with EIGHT ads? I like your videos, and watch them often, but the most annoying parts is the amount of ads. Just thought I would throw that out there. Keep the mods coming!
Thanks for watching!
Just for the money dude
It’s so annoying lol
Ads make the money, if you want to make him more money, just get premium:)
Gotta love ad blocker
This is by far the best intake i ever seeing
Yes sir
Having to re-watch this video 3 years later because I finally bought this intake after having the PRL Stage 1 for so long.
Hey thanks for the love and support!
Slowly been watching your videos 👍🏽
10:24 That second bolt that holds down that intake resonator. *&^% Read about it on the forum too. Would've been so much nicer if a hole was through the plastic to give you access to it.
Even after removing that bolt, there's removing the intake resonator too. Another *&^%! I just finished doing this before typing this. Good luck! Now to continue...and thanks for your video.
Nevermind, you were right that was my brake pressure.
I'm good now....lol
Thank you for your time
Lol no worries
Tip for Japanese cars.
Use Japanese Industrial Standard Screwdrivers. They are soft metal like the bolts they use in these cars. Less likely to strip.
That’s a lot of work . Super skeptical on CAI seeing how my old 06 civic Si took a nice sip from a freak puddle during a heavy thunderstorm. Looks decent I’d invest in some Tbolt clamps .
is there an auto zoom option to your camera? maybe you need to have a look at that. Great video man, keep them coming.
Thanks for watching.
Does this mod benefit the performance of the car or the way the engine/air intake sounds? How did you get so mechanically inclined? Love your vids (even though I'm mostly clueless about some of them). Southern Boys Rule!
Indeed it does benefit the car. Colder air gets delivered to the turbo and the intake sound is amazing. Thanks for watching man!
This video made my install exceptionally easy! Thanks man! BTW, I have Ktuner also on the 19.5/23 setting and I’m getting an emissions warning on my car... any ideas?
Check and see if the rear o2 sensor is turned off.
I just downloaded the SI logo in my car look awesome I pickup the same that you did thank you torres
Glad it worked!
hi, nice video. Just wondering one thing though. I usually have my friends help me installing stuff for my cars so I have 0 tools to do these work. What kind of tools like wrench does u need for this installation? I am getting my intake in a few days I just cant wait to get started.
Just a basic tool set!
Hi ttorres
Want to really thank you very much. I'm older than you and you have encourage me to work on my car that I never did before.
What was your boost psi stock before your cobra cai, charge pipe , intercooler install.
I have AEM Charge pipe and cobra cai with a sirimoto throttle spacer, sway bar, chassis brace and strout bar.. I started with 16 psi stock and now I hit 20psi no tuner yet. Thinking oil cooler next. I live in PA Poconos.
Thanks for watching. Honestly I don’t know what my stock boost is but I can tell you I run k tuner base maps!
Nice man keep up the nice work 👍👍
Thank you!
I need to clean my filter , can I do it from under my Car by removing the 3 bolts and 2 clips on the plastic? located at the corner
Yeah bro that's the only way you really want to do it. I'm not sure if you even can from above
Nice sounds great!
Thanks for watching. I will be filming a more of the intake noise in a later video!
Thanks for the video! Nice job!
PRL is this intake legal in California? Please say yes....
Why would lt not be?
California has stupid emission laws. Almost all intakes out right now arent legal in CA. Some companies won't even sell or send to CA. Sucks :( I'm hoping this one by PRL is CA legal.
I hope so
PRL replied back to me and sure enough the intake isnt CA legal :( The search continues.
Was going to put a CAI on my Si (2017 si sedan) and was wondering about if it’s close to the hex grill. If so, I was pondering the idea to pop some holes out just like on the horn side.....maybe some more. Just wondering if you’ve done that or heard of it. Thank man! Great vids!
No sir never heard of that.
I saw Hondapro Jason do something similar to his yellow Type R... ua-cam.com/video/VyADyIc7QYA/v-deo.html its around the 1:40 mark in that link if interested. Might help airflow to CAI filter... :) Have a good one!
lol wish you uploaded this a couple days ago put my injen cai on sounds awesome
How do you like it? I waited for PRL to release this intake for a looong time! Thanks for watching!
yea i want some prl parts im waiting for that intercooler but i like it you hear the turbo alot more when you want too
Yes this intake deff. Enhances the turbo sounds. It was well worth the wait!
Nice vid. The filter seems really close to the ground. How far off the ground is filter? I live in Florida and we get a lot of rain I use this car as my daily.
Chris Varona thanks for watching! The filter is actually pretty high of the ground also I don’t see how water could reach the filter unless you drop thru like 2ft of water. I was skeptical about hydrolock so I called PRL and they said also you would have to drive thru like 2ft of water before any damage would happen. I live in Alabama and we get lots of rain also. I’m not going to be afraid tho... you have the bottom and wheel well fender plastic protecting from water even touching the filter!
Thanks for the info. I wasn't worried about hyrolock more than just the filter getting wet. Is it made to get a little wet ?
That’s a good question but i don’t think the filter will get wet at all...
Hopefully you do a follow vid in a few weeks and let us know how you like. I'm thinking about purchasing.
That has definitely been a thought 💭 I’m sure I will make a follow up video about the intake!
Outstanding.
Just subscribed, you seem cool homie, thanks for the tips on how to install
154 likes now. So go buy that intake pipe!
What about when it rains will the water go into the filter ?
That’s was my concern. Not unless it floods SUPER bad. Like 2ft of water
That's what I'm afraid of I have a 2018 Accord Sport I'm still waiting for some upgrades hopefully they make short rams. great video bro keep it up
Just finished the install, and I gotta say this video was extremely helpful. As detailed as one person working and filming at the same time could be. Only problem I ran into was the silver 10mm bolt that holds the plastic trim to the black plastic under tray of the car. No idea why but it just doesn’t wanna thread into place. Can anyone out there help?
Ayy thanks man
Race or street MAF? Great video!
Street? Which ever requires no tune! Thanks for watching.
im planning on picking this up for my fk7. but quick question did you get the street or race one?
I had street... on stock turbo. Now I have a big turbo so I have race
@@TTorres1183 Hey thanks for the reply my guy. Here's also a thing. i have a automatic sport. would it still be worth getting? Im planning on getting hondata when i do decide to pick this up or not. Thanks again for your time replying.
Hi ttorres1183
Your videos have been a great and I thank you for sharing.
After I installed the cobra inrake but decided to go with the AEM Charge pipe....My psi/100 is not responding like before,only when I apply my brake and one bar lights up. Did this happen to you after your install.
Thanks again
Are you talking about bars for brake pressure?
No, the psi boost. Where it shows the number +14 on your dash
I'm thinking maybe the one of the sensor
My man Torrez how much hp do you have on your si with everything u have install I’m starting to do the same thing to my si 10th gen
Not sure yet... haven’t been on a dyno!
Hi I’m stuck with a wire that is attached to the original bracket that I’m unable to detach could you help me out
Which wire
Hey Torres thank you for the video now I have the type R steering wheel and the tanabe strut tower bar install thank you man
Your are welcome!
What are the gains or is a JUST NICE TO HAVE?
The HP gains can be found on PRL’s website.
Next PRL intercooler then you're Set
Ronald.... your behind... I’ve have the PRL intercooler on for awhile. If that notification button so you don’t miss my post! :D
Quick question, did you dyno the car after the intake install? Just before i buy it i wanted to see the performance numbers.
No I didn’t. Check out the PRL site for numbers.
What steps can you disregard for PRL’s short ram intake? Do you still have to remove the lower portion of the air box?
I don’t think so.
no its way easier
If it rained excessive do you think the cone would get wet
Those two bolts are the only ones holding the air box ?
did you go with the one that needed a tune or the one without a tune.
Tune?
Yes sir, next weeks video!
How do you tune the PRL cobra CAI with KTuner, can you make a video? Or point me in the right direction
When you say tune elaborate
TTorres1183 what do you mean? I don’t follow
TTorres1183 did u get a check engine light after install
No
Whats up torres did any codes pop up on your end ? I can't use sport mode. Im running it with out tune
I build boost hits 21 then i go limp mode .Would appreciate the response
Do you have a k tuner?
@@TTorres1183 no i do not . Could that be problem? Took it to dealership and they said turbo is taking to much air in
Did you get the street or race maf? The race maf requires a tune.
how did you fit that metal piece at 14:38? I can't seem to fit mine there
Thank you ❤️😁
did your car have the Ktuner base map prior to the install of the intake? Does this intake require a tune or can I install as is? bone stock?
My car was bone stock before the intake... you an install the intake as is no tube required with street MAF
damn i really want this but it's just a bit too expensive =(
700 like yess
Awesome will this be the same on 2019 civic?
Should be.
A little late but yes it's the same lol. You just need to make sure you get the Non Si version if you have the regular 1.5T like me.
Is it the same procedure or steps as the sport hatchback? Other the clutch relocation bracket since mines a cvt
exhaust stock?
Can I skip the clutch relocation part if I have an automatic lol
Quick question: did you notice any decrease in turbo spool response or low end power after your install? I feel like prior to my install, my turbo would spool easily at a light touch of the gas pedal and now, it feels like I've lost a ton of low end power and spool.
I have not noticed that...
Unfortunate I don’t have the ability to jack up the car and remove the skid plate. I’ve taken out the two bolts for the lower box that PRL shows on their installation guide. Where the heck is the hidden bolts that are still holding it in? Can’t see em anywhere
Man I would have to be under to car to show you
No worries. I shoved my arm all the way under and was able to find them, including the bolt that Honda put in under the resonator box, facing the skid plate, with a 1 cm clearance. Shredded my hand trying (and failing) to get that one off, and eventually just grabbed the whole resonator and snapped it off the mount in a fit of rage.
Cobra CAI is now installed :)
Hello judging wondering if this works on the 2016 vti version
A lot of extra steps.....
i wish my sensor skrews were that easy😔
Do you have any exhaust mods on this?
Yes, resonator & muffler delete
you need a camera that focuses better
Do you need the clutch relocation thing ?
No
Can i install that prl cobra intake on my civic 18 ex t model?
Yes sir I believe so. Double check the PRL website
Is this a bad intake is you live in a rainy area
Nothing to worry about
Do you have a tune?
K tuner base map
I have an 18 civic sport and my prl cobra is on the way.. do you know if the installation on the sport is the same as the si?
It should be!
Damn those cone filters sit really low
If it's raining excessively do you think the cone would hey wey
Get wet
I don’t think so. I don’t worry about it.
Stock exhaust?
In this video yes
What else u got in it
How about I just change to a PRL CAI intake and a AEM charge pipe today. Now every alarm know to man is going off from brakes to emissions anyone ever heard of this issue? I am in the process of a full power reset to see if that helps.
And let that be a lesson to disconnect the battery!
Do u think I can use the same intake in a lx?
That would be a question for PRL
Thanks for the reply 🤙🏻
Did the check engine light come on?
Not at all.
I just installed this intake and now have a emissions code! Is that normal for just a intake?
Which MAF did you get?
TTorres1183 I got the race! I know now I should have ordered the street. That’s what I get for not fully reading! Lol! I have the street MAF on order.
What’s the red bar across the engine?!
Strut bar.
How much it cost
300+ I think
what does thats red bar above tge engine called
Strut tower bar
@@TTorres1183 what does do
What’s the easiest way to pop the clips out? Everytime I try to pop clips out on the car I end up breaking them
Trim tool kit
TTorres1183 thoughts on best one to order?
acuityinstruments.com/products/interior-panel-and-trim-removal-tools
Thanks sir
Glad I could help.
Will this fit a 2018 si ?
I believe so you’ll have to check the soecs
Specs
It will. There all the same 17 or 18.
Hi hello every one I need help I only got 500 miles on my 10th gen si and I bought the cold air intake can I be able to install the intake even tho I’m still breaking in my engine
I would wait til the break in period is over but it should not really matter.
Ttorres1183 okay thank man. At how many mines did you install your intake ? And how many miles you have now ?
I think I was at 2k+ and I have 4K plus now
Ttorres1183 Ok thank yeah I really want to install the intake haha I’ve had the intake before I even got the car lol I’ve been ready.
Just want the car to breathe a lilttle better while I’m still braking in the engine.
Go for it man!
Is this the street or race I take?
intake*
Street
over all how much HP would you say your sitting at?
That’s the question everyone ask! I’m not sure man
That air filter seems way too close to the ground. Hopefully you don’t suck up any water
Personally I don’t see how water could get sucked up there is all the plastic that guards the water from even touching the filter...
Yeah I’m curious if the filter would get wet on a rainy day but it does sound good.
I don’t see it ever reaching the filter...
Nice vid! Dont forget to disconnect ur battery so ecu can relearn new intake. Its a 10mm on top. Ur dash should tell u to drive careful so system can initialize, drive for 2 min and itll go away. Also did u get a chance to straighten ur clamp before the maf? Its on a slight angle. Let us know how intake is after few days give us ur review! Sub to my channel ill be posting up injen cai soon, lets support the enthusiasts!
MySI thanks for watching and yes sir clamp is on straight now! What reasons you went for the injen over PRL?
MySI and I SUBSCRIBED!
TTorres1183 injen has better instructions on how to remove resonator ha lol jk. Did you check out my vid yet? No actually im kind of old school with my intakes, i like the idea of using stock maf and i like the filter to sit behind the bumper especially since there is no circulation from the engine bay with the metal panel underneath. Itll get very warm in there in the summer. Another reason is it gives a nice clean look. Prl has great products but i like the simplistic looks on injen. You plan on doing any dyno with your boltons? Just did mine stock im not sure if u saw it.
Yes sir good job!
Is that really necessary if your uploading a tune after
How much did you pay for it
I don’t remember bought back on the first pre sale
Link bro?
Bio bro
I just installed the intake. And after i drive it for a while, all the sensor goes on and the car feels heavy when drive it. Do you know what’s going on? And does it happened in comment?
What MAF did you get?
Im using the old one from factory. What did you have? And after I diagnosed it, a code comes out and says system too lean at the idle DTC. What is that mean??! 🤔
I hope one day Honda replace that weak engine for another one.
Poor cold engine!
Why do all these kids use the word "super" to describe everything?
Why not? And what’s your definition of a kid?