I used one of these on a uhaul for a cross country move. The trailer WAS broken into but the lock wasn’t the weakest link, in fact the thieves clearly spent a LOT of time trying to break through the lock but ultimately found that breaking the metal on the uhaul itself was easier. This lock is an absolute beast.
Which begs the question: Would using such a lock inadvertently signal to would-be burglars and thieves that the contents it is protecting is of high value and therefore worth the effort? If so, how should we overcome this?
A friend had this on his shed as it stored a few valuable bicycles. The thieves tried picking and cutting the padlock but eventually found it was easier to lift the entire roof of the shed and grab the loot.
Just another reminder that locks are primarily a deterrent against low-effort, opportunist theft. -- If someone really wants in, there's always physical destruction.
I imagine the Abus guys cheering in their office when one of them finds this video. "A Padlock I'd Use" from LPL has got to be one of the highest praises a lock can get.
@@lbunjes thats to say, it is a lock good enough to be used next time a lock is needed, he would consider it among the other applicants. so it's a matter of time, place, and application.
I feel like whenever a lock manufacturer gets the LPL seal of approval, the whole office goes nuts. They set off confetti cannons, Sheryl from accounting kisses the mailboy randomly, engineering team is hugging each other while sobbing with joy, the CEO closes his office door leans back and let's out a sigh of relief.
ORORORORO!!! I spend half of my day sleeping! ORORORO!!! Then I sometimes get up and tell you that I am a famous content creatorORORORORO!!! Please don't sleep while driving, dear cz
"The disc detainer core is upgraded with a butterfly disc to prevent what I am about to do now." Nice try Abus. Still, pickresistant to mere mortals goes a long way.
Okay, so to tally the work your average thief needs to do to pick this lock: - identify the lock type and either try picking or see right away his picks won't work - research the mechanism and the kind of tool needed - build that tool (assuming they aren't being manufactured somewhere) - come back and spend a lot of time fiddling with that lock because the butterfly disks and new tool will cause him to fail a lot. The time to beat under optimal conditions and perfect understanding of the mechanism with full preparation, years of practice, special tools and zero pressure is three minutes of concentrated, uninterrupted work. A mook with a rake has no chance, a good picker with a set of tools goes nowhere unless he has the perfect tool by any chance and knows this specific lock well. For this to be picked you'd need an absolute lock fanatic and probably ten minutes or more of very obvious picking effort. Realistically, this pick will never be attempted. It will always be faster and easier to cut through what the lock hangs on, or even the shackle.
Just to be clear: kryptonite locks that many locksmiths just say aren't pickable and grind them with an angle grinder take him 20 seconds to open with this tool
@A cat on his hind legs. true, but also if you're gonna call yourself a locksmith you should be better than amateur at the very least. if you aren't you probably shouldn't advertise yourself as one. you know what, if LPL ever runs out of locks he's interested in personally opening, he should send things to locksmiths and see if the lock comes back open or cut.
@A cat on his hind legs. pretty much every one I've ever known to go to a locksmith came back and said they'd have better off using their own angle grinder because they never even tried to pick the lock. Dunno the actual work day of a locksmith looks like but, never heard anyone getting their locks actually opened really.
@@TGPDrunknHick exactly, if locksmiths keep just using an angle grinder, then they WILL lose their jobs as everyone else just stops trying to go to them and use their own angle grinder or borrows a friends
@@XiaoYueMao I wouldn’t pay a locksmith to grind a lock. I took my 9” grinder to a padlock on a chain holding a horse paddock gate closed and it took me less than 15seconds and I was being careful!
Bosnian Bill has stepped away to deal with Family matters but LPL still credits him every time their pick appears. This speaks to integrity and I have noticed it and appreciate it.
@@mofoq he is fine. He was helping some kids out and realised that he has not left alot of time in his schedule for life so he decided to stop the tou tine
In a safe environment, with all the right tool available, with no pressure, and already knowing what is the best way to open it, it takes an incredibly amount of effort from him! Unbelievable!
What the hell, I just purchased one for ~85€ ($94 USD), in Germany. Of course it is produced here and shipping those across the globe isn't cheap, even in big amounts, but 100% markup definitely gives away that not many of these are beeing imported in the US.
Same price in France. I'd note that even abus' low quality locks are really good, probably the best you can get for the price. Were the hardest to feel open in HS.
@@dyingearth a good chunk of it is also picking the lock. a lock that takes lpl 1-2 minutes to open can already be considered good, it took lpl almost 3 full minutes to get this thing open. i'd trust this lock with my valuables for sure, exceptional job abus
@@dyingearth But nowadays LPL only guts locks that do something especially cool or different. I wish I owned something valuable enough to need a lock like this!
@@dyingearth This lock took him about 3 mins to pick, most of his videos don't even reach that mark. An that includes the intro, closing, explainations ect. Also this needed a special design pick which he took part in designing.
@@thomasrovnak312 There is nothing special about the design of the disc detainer pick that LPL is using. It's just a well-made, mid-price disc detainer pick. Many others available that are of the exact same design.
The fact this lock took just shy of 3 minutes for the LPL to pick tells me that the worlds nuclear warheads should be secured by theses Abus locks!! 😁😁
As far as marketing goes, praise from The LockPickingLawyer, especially him saying that it's a lock he'd use himself is a HUGE deal in my opinion. At least with the customers / security professionals it matters.
While I would agree with you, we still have to acknowledge the reality and state that in order for this to be truly effective marketing it would need considerably larger demographic being aware of this along with his proficiency in picking.
The amount of time it took LPL to open this definitely illustrates the difference between a cheap disc-detainer core and a quality one with more discs and false gates. I'm sure even with the correct tool it would stymie a novice picker for a long time. Looks like Abus put some thought into this one and took feedback from pickers or at least picking videos when they engineered the core. I'm not sure if I have anything with a hasp good enough to hang a lock like this on.
What I love about this video is when LPL says "This has a butterfly disc so it can't be picked with a tool like this. Now I'm going to pick it with this tool anyway." Nice job!
@@rupedog He explains near the end of the video - The "Butterfly" disk makes tensioning off the first disk prevent the lock from opening. So he circumvented that by tensioning off a disk further down the core.
We have sold dozens of these 80 and 60 models. Tenants love them. The removable shackles are awesome and the beefy design leaves no doubt it is simply one of the best available anywhere.
Wow, this is the most challenging I've ever seen him go up against. Great padlock. I think I'll be getting a couple of them for my home and tool shed. Thank you LPL, I appreciate you sir 👍👍
You know you're a winner when you have 3.65M subscribers who really are not into locksmithing. This guy is just so entertaining and proficient. Everyone loves a genius.
@@MrTruckerf A lot of us are pickers, but I suspect it's less than half, and I suspect many of those are doing it on occassion, and not as a dedicated hobby. Unfortunately, it would have no bearing on theft, as the vast majority of thieves just resort to the quickest destructive force they can dish out. Most home burglaries are less than 5 minutes overall, and they kick in the door to gain entry. They go straight to the master bedroom and toss it, which is where most people hide money, jewelry etc. that can be unloaded quickly and difficult to trace.
Confirmed 'non picker' here, as I've only ever used bolt cutters or bullet to bypass locks; he is incredibly entertaining and I've had a growing interest in learning some of the (no offense intended) easier lockpicking and bypass methods simply out of personal curiosity. He does make it look easy but most masters do.
‘Only an exceedingly skilled picker could open this in the field’ Everyone who ever bought the pick that LPL and Bosnian Bill made now own the Granit padlock and a month on, it’s still locked… 😉
Finally a worthy opponent to LPL! Getting praised from him and the video length speaks volumes about the lock! Would be a definite buy for security. Also, the tool which LPL and Bosnian Bill created is wonderful and it's great to see LPL mentioning it in every video where he had used the tool to attribute that himself and Bosnian Bill had created the tool! Man of words and really appreciate the friendship, honor, respect and integrity LPL has on Bosnian Bill! No words to express any more gratitude. Nothing but thank you so much LPL for such wonderful videos, advice and insights into the lock picking and the lessons on various methods, safety and security features of locks with unseen / unheard information that you provide on each and every bit of the materials, working mechanics, etc., etc., I could go on for a long time, but thanks again from India! I truly have learnt a lot from your videos (still learning) and trying to enhance my skills on a day to day basis in the magical world of lock picking with your videos! Thanks again! Wishing good health to everyone in this world! Let this world be a peaceful place! Let the almighty god or supreme power bless everyone with abundant health and wealth and security!!
I dont' know exactly what he is doing when he discovered 5 is a zero cut and then tensions off of it to open the lock, but I am blown away every time I see him do that. Love watching him work.
When you said false gates, "aren't particularly hard to put in from a manufacturers point." That has to be a jab at the companies of like, "its easy to make your locks better so do it!!!"
"very unlikely to be pick in the field" Ah, crap, gonna be sold out everywhere. "this is certainly a lock I would consider using" Ah, crap, it's going to stay sold out for a while! I've got to say, as entertaining and educational as it is to watch you open so-called high security locks as if they were child-safety latches, these videos where you cover locks that turn out to be good have practical benefits that are hard to beat. Thank you, and keep doing the good work!
The padlock is massive. I own one myself. For gym lockers and things like that, this lock won't do, this is a padlock that is designed for shipping containers and such. You come to a point where the lock is so insane, it's easier to just break whatever the lock is protecting. So if you are going to spend 100-200$ on a lock, you have to make sure that the material where you are attaching the lock, can't be broken in matter of seconds, or else it's just a waste. So this lock has limited use.
@@FabledGentleman they need a "family" of them a smaller "gym locker "friendly" version as IMHO that is the BIGGEST security vulnerability most people have
@@jasonriddell that's what the DISKUS locks are for. They're not disk detainer, but they *are* a heck of a lot better than a Master 141... if you wanna get really with it, a DISKUS 25/70 is a dimple key cylinder, no average raker is gonna get that... or if you're REALLY serious, an Abloy PL-321 with a Protec2 cylinder. Although given most gym lockers, a savvy attacker would just show up with a big set of vise grips and use the Abloy to wrench the hasp off the locker.... that's not gonna be nearly as simple with a DISKUS. Doable? Probably. Pain in the ASCII; they're gonna go look for another lock. Both of these guys are way less dosh than the Granit.
@@stonebear I thought some of the Diskus line did use disc detainer cores. Like the 20/70. It claims to have the ABUS Plus disc cylinder. I could be wrong and mis-remembering though.
Yeah not only did it take quite a long time for him, but also we didn't even get the famous "nothing on 3, nothing on 4, 5 is binding" on every single one at least
I gave my best friend a smaller version of this lock for his birthday in 2019 and it's the only lock he hasn't been able to pick yet. I am happy that I can now show him that it is possible :D
That's like giving your friend a bow and some arrows for Christmas, showing him a video of an Olympic archer hitting 20 bullseyes in a row, and saying, "See? It's possible!"
LPL: “This is certainly a padlock I would consider using…” *sales immediately sky rocket minutes after the video is posted* I feel like there is a room of Masterlock designers crying in a room somewhere as they dream of hearing those words one day
Anyone who watches this channel definitely saw the skill required. The amount of time you spent on each disk alone much less all the fiddling you had to do on each one shows how hard that was.
We have those Locks at work, securing hazard material containers wich are outside in the open. They are rated as weather resistant, but after a year or so, they get impossibly hard to open. greasing them once every 3-4 months is a must. Other than that, they are exceptionally tough, our Janitor once had to cut one of them open - his old angle grinder was not up to the task.
I am not longer on the coast but 90 miles / 150 km inland and have had mine for a few years and it opens smooth as can be. One of the reasons I like the lock. I pretty much just bought it for the build quality as others have noted the lock is generally overkill unless you are putting it on a pretty well guarded and hardened facility.
Hi from Germany! This explaines a lot! At first I thought someone just has slept thru new years and now celebrates it a week later now, because I heard fireworks and champaign popping noises. But then I saw this video.
Very fair demonstrated how long it takes to pick it. You as the best picker I know needed more than 3 minutes to open it. So it‘s save enough for common use. Thanx for your job, move on 👍🏼 Please sorry my bad english, I always slept on english-lessons ;)
LPL: This is certainly a lock that I would considered using. ::: Goes to website to order ::: Website: On backorder. Restock date unknown. Me: Dammit!! (using Cartman voice)
I bought mine years ago when I did my own research. Win. Once this whole Brandon situation clears up, Abus will be able to increase manufacturing again.
@@logmeindog "Brandon" situation"? Are you somehow blaming Biden for Abus Manufacturing issues? Abus manufacturing is in Germany and China. Not sure why you're blaming Biden for any issues on their part when their facilities aren't in the US.
@@Jhaiisiin You obviously watch too much CNN to realize the docks in America are being backed up because of Biden's mandates and not rerouting the traffic.
If it takes LPL this long, I'd imagine an average picker even with the right tools would have given up and looked for another security flaw, like in the chain or hasp it's locked to
Yeah, someone broke into a uhaul with this on it, by forcing damage onto the door at several points to take down the door, despite also having tried and failing at damaging and disabling the lock. You know the lock alone wasted an hour.
You should do a video for your highest recommendation locks for different categories (padlock, deadbolt, trailer lock, etc) and offer both the best most expensive option along with a budget “runner-up” alternative. Your wealth of knowledge would have me buying a lot of locks in very short order!
Depends on what you're locking up, and whether a $200.00 lock is worth it if there are other easier ways to steal it. I've seen an Abus padlock on a hasp installed with the screwheads exposed.
Came back to this video 2 years later since I decided to upgrade security for my motorcycle. Decided on getting this lock since I remember this being a recommendation from LPL. Now that I have it, I can definitely say it is a beast of a lock! Worth every penny!😊🔒
I've had one of these for about 2 years, I got it for one of my dad's gates that we never use. He didn't like having another key so he just used a masterlock. Couple days ago I decided to buy an abus 130/180 shackle and use it on my shed lol. A bit overkill, but at least the lock won't be the weak point
The pinnacle of award any lock manufacturer can have: a long video of LPL trying to pick it. The lock designer team should deserve a big fat bonus pay check.
Woah-up there buddy, Not so fast with the pats on the backs with sacks of cash! Make them dig a little deeper and design a lock that Defeats LPL! Then you wouldn't need to pat them on the back with sacks of cash because the sales of a lock capable of the feat would drown the company in orders and wealth unimaginable.
True, but the main purpose of the gutting is to prove that what he picked matches the difficulty of his what he claims. Not that anyone doubts him at this point, but it's a show of integrity.
What's the difference? He can pick the lock. If the lock was positoned in an inconvenient position or angle, maybe it would take him 5 or 10 minutes instead of 1 or 3 minutes to set himself up and get the thing open.
@@DrBastycore They are, Abus is short for "August Bremicker und Söhne". They are known to be extremely religious for German standards and belong to a faith that the English wiki calls "Plymouth Brethren", a small protestant faith. It's one of the more ... conservative ones too, not to the level of the Amish, but they don't really believe in equal rights for women and such. Would be fun to get Twitter mad about it :)
Bosnian Bill was the first lock picking channel I found and was the reason for my interest in the craft. Was disheartened when he left his channel. But I understand his reasoning. I have followed you since. Was happy to hear you mention him. Thank you Sir.
Hi, if I may ask a favour, once in a while, can you please let’s us know how Bill is doing if you still stay in touch. Thanks very much for all you do for the viewers.
i love seeing locks that you actually recommend, they're so few and far between, i would also like to see those false gates just a little deeper, and the shackle guard at least upgradeable to a hardened steel one. great job of showing us this lock, and as always, thanks for all the enjoyable content!
I love the way that on the Amazon UK page for this lock, the "Amazon Basics AB-PL100 Padlock - Stainless Steel" lock is listed under the "Similar item to consider" title. I suspect that LPL wouldn't consider that anywhere near "similar" - the only thing similar is that they are both technically a lock!
*looks* well, if the key for that item is shown accurately, it *is* a disc detainer lock, which, if it's also got a proper ball-bearing retainer, is WAY better than a Master 141...
It's an Amazon Basics article - they plug those on anything that has a passing resemblence to a distant relative of someone who once saw the original article from a distance.
I don't know if you've read my comment suggesting you open another channel, featuring locks that give you trouble. But this one was so much fun to watch, and I enjoyed every single minute of it. Thank you!
"This is a lock I'd consider using..." - The Lock Picking Lawyer. That will now be the branding on every lock that meets his approval on the packaging of these things going forward
It’s the only one if you’ve been watching for a year or two. In the past he mostly made videos on great locks and every once in a while would do trash locks. Now he only does trash locks
Just went to a padlock shop, had trouble on deciding what padlock to buy. Just checked the title of this video and immediately bought this one. Thanks for helping with the decision, even tho the lock wasn't cheap, but I am not complaining :D
@@marcogenovesi8570 It would be nice if it were in a smaller lock. For some applications I'd like to use it for the shackle is too thick. A Master Lock #5 is the largest. 14MM is just over 1/2".
This is a fantastic lock, took this guy some time and he had a specialty tool, skill with this style of lock, optimal holding angle under optimal lighting, was indoors and probably seated and calm. Rather than say trying to bust open a trailer at a truck stop with constant traffic some of which is probably state police, at night in possibly less than optimal weather and a truck trailer is certainly not at optimal working height for picking.
"Then I'm going to get the pick" Crowd gasps "that Bosnian Bill and I made" Crowd erupts! Goes wild. Screaming, cheering, shouting. Revelry everywhere!
This is very cool to see and I love the cautious recommendation. At this point you really have to evaluate what you're locking because the lock could be stronger than the chain/bracket/door that you're locking!
![[927] The Strongest Padlock in the World (Seriously) - Squire Stronghold SS100CS](http://i.ytimg.com/vi/nwgwCmh7SGg/mqdefault.jpg)
![[927] The Strongest Padlock in the World (Seriously) — Squire Stronghold SS100CS](/img/tr.png)
![[593] Gallium vs. Titalium - Abus Padlock Meets a Gruesome End](http://i.ytimg.com/vi/jeghGhVdt9s/mqdefault.jpg)
I used one of these on a uhaul for a cross country move. The trailer WAS broken into but the lock wasn’t the weakest link, in fact the thieves clearly spent a LOT of time trying to break through the lock but ultimately found that breaking the metal on the uhaul itself was easier. This lock is an absolute beast.
Ah yes, the impenetrable door fallacy
Which begs the question: Would using such a lock inadvertently signal to would-be burglars and thieves that the contents it is protecting is of high value and therefore worth the effort? If so, how should we overcome this?
@@9VARZ Pay Masterlock a small fee to put their name on the front of the locks.
@@9VARZ I don't think so. I would use a good padlock even for a 5$ stuff.
I don't like my things being stolen, even if worthless.
@@9VARZ Just put some black duct tape over it
If anything, you can just hide what would otherwise be fancy looking branding
A friend had this on his shed as it stored a few valuable bicycles. The thieves tried picking and cutting the padlock but eventually found it was easier to lift the entire roof of the shed and grab the loot.
bruh
Dam
Just another reminder that locks are primarily a deterrent against low-effort, opportunist theft. -- If someone really wants in, there's always physical destruction.
@@jnharton so in conclusion, a sentry gun is the best defense
@@callumbreton8930 If you like prison time, sure.
I imagine the Abus guys cheering in their office when one of them finds this video. "A Padlock I'd Use" from LPL has got to be one of the highest praises a lock can get.
He said, "a lock I'd CONSIDER using"
It still gets the point through : the lock is good enough for him to use, but he's not using it because he already has the locks he needs.
@@lbunjes Look at the video title
@@lbunjes Read the title. It gets the message through.
@@lbunjes thats to say, it is a lock good enough to be used next time a lock is needed, he would consider it among the other applicants. so it's a matter of time, place, and application.
I feel like whenever a lock manufacturer gets the LPL seal of approval, the whole office goes nuts. They set off confetti cannons, Sheryl from accounting kisses the mailboy randomly, engineering team is hugging each other while sobbing with joy, the CEO closes his office door leans back and let's out a sigh of relief.
I thought I was the only one that thought that.
And if I was employed there, I'd finally work up the courage to ask the front desk girl out. I heard she's fresh broken up with her boyfriend.
*lets
Meanwhile at Masterlock...😂😂
@ beste 🤣
When even the lock picking lawyer would use the lock you know the lock is pickproof to any regular mortal
I can probably pick it... but in addition, I'll need a tent, a volleyball, some MRE's, and two calendars.
@@ch4.hayabusa best I can do is a can of Rip It and a tin of Skoal.
@@ch4.hayabusa all you need is a nuke
nobody bothers picking locks those days, a good set of bolt cutters or a portable grinder is all the lock picking "skill" you need
@@werhold
Well, he did mention that the shackle guard was only made of zinc, being a point against the lock.
Title itself is one of the biggest praises that you could've ever gained as a lock company
ORORORORO!!! I spend half of my day sleeping! ORORORO!!! Then I sometimes get up and tell you that I am a famous content creatorORORORORO!!! Please don't sleep while driving, dear cz
It would probably help their sales to be honest if they quoted LPL on the packaging 😊👍
Instead of attack this lock I would attack the hooks of the door / gate
I went to their website immediately 🤣
Might as well put the quote on the lock packaging!
"The disc detainer core is upgraded with a butterfly disc to prevent what I am about to do now." Nice try Abus. Still, pickresistant to mere mortals goes a long way.
Okay, so to tally the work your average thief needs to do to pick this lock:
- identify the lock type and either try picking or see right away his picks won't work
- research the mechanism and the kind of tool needed
- build that tool (assuming they aren't being manufactured somewhere)
- come back and spend a lot of time fiddling with that lock because the butterfly disks and new tool will cause him to fail a lot.
The time to beat under optimal conditions and perfect understanding of the mechanism with full preparation, years of practice, special tools and zero pressure is three minutes of concentrated, uninterrupted work.
A mook with a rake has no chance, a good picker with a set of tools goes nowhere unless he has the perfect tool by any chance and knows this specific lock well. For this to be picked you'd need an absolute lock fanatic and probably ten minutes or more of very obvious picking effort.
Realistically, this pick will never be attempted. It will always be faster and easier to cut through what the lock hangs on, or even the shackle.
And pick-resistant to LPL himself! He showed this in a video four years ago and stated that he couldn't pick it then.
Just to be clear: kryptonite locks that many locksmiths just say aren't pickable and grind them with an angle grinder take him 20 seconds to open with this tool
@A cat on his hind legs. Exactly, the fact that it still took TLPL 2 minutes to open shows how good of a lock this is
@A cat on his hind legs. true, but also if you're gonna call yourself a locksmith you should be better than amateur at the very least. if you aren't you probably shouldn't advertise yourself as one.
you know what, if LPL ever runs out of locks he's interested in personally opening, he should send things to locksmiths and see if the lock comes back open or cut.
@A cat on his hind legs. pretty much every one I've ever known to go to a locksmith came back and said they'd have better off using their own angle grinder because they never even tried to pick the lock.
Dunno the actual work day of a locksmith looks like but, never heard anyone getting their locks actually opened really.
@@TGPDrunknHick exactly, if locksmiths keep just using an angle grinder, then they WILL lose their jobs as everyone else just stops trying to go to them and use their own angle grinder or borrows a friends
@@XiaoYueMao I wouldn’t pay a locksmith to grind a lock.
I took my 9” grinder to a padlock on a chain holding a horse paddock gate closed and it took me less than 15seconds and I was being careful!
The lock package will probably have _"A Padlock I’d Use" - LPL_ printed on it in the future
I have seen episodes with comments from manufacturers so it is possible.
It damn well should!!
Yes, with the QR code to get to this video!
Yes, because everybody who buys padlocks wanks to LPL videos.
@@russellspencer3214 Glad you are open about that. I thought was some kind of weirdo and the only one who does that 😳
Bosnian Bill has stepped away to deal with Family matters but LPL still credits him every time their pick appears. This speaks to integrity and I have noticed it and appreciate it.
They are still business partners and friends. You tube isn’t life.
@@mofoq he is fine. He was helping some kids out and realised that he has not left alot of time in his schedule for life so he decided to stop the tou tine
Bill will forever be a legend. I hope he's enjoying his time with his family
I think that is just the technical term for this kind of tools.
Allen Wrench
Phillips Screw
The Tool Bosnian Bill and I made
Plus, Bosnian Bill is just too much fun to say
In a safe environment, with all the right tool available, with no pressure, and already knowing what is the best way to open it, it takes an incredibly amount of effort from him!
Unbelievable!
LPL: "That's a lock I'd use."
Amazon: 200$
Me: "I'll just weld my frogging doors shut."
What the hell, I just purchased one for ~85€ ($94 USD), in Germany.
Of course it is produced here and shipping those across the globe isn't cheap, even in big amounts, but 100% markup definitely gives away that not many of these are beeing imported in the US.
Same price in France. I'd note that even abus' low quality locks are really good, probably the best you can get for the price. Were the hardest to feel open in HS.
At least £100 in the UK
this particular one LPL got is $123, what model did you buy?
@@StevenL00 Didnt. And it was CAD, so slightly higher numbers.
The video duration alone is a ringing endorsement of this lock. Well done Abus.
A good chunk of it is the gutting of the lock
@@dyingearth a good chunk of it is also picking the lock. a lock that takes lpl 1-2 minutes to open can already be considered good, it took lpl almost 3 full minutes to get this thing open. i'd trust this lock with my valuables for sure, exceptional job abus
@@dyingearth But nowadays LPL only guts locks that do something especially cool or different. I wish I owned something valuable enough to need a lock like this!
@@dyingearth This lock took him about 3 mins to pick, most of his videos don't even reach that mark. An that includes the intro, closing, explainations ect. Also this needed a special design pick which he took part in designing.
@@thomasrovnak312 There is nothing special about the design of the disc detainer pick that LPL is using. It's just a well-made, mid-price disc detainer pick. Many others available that are of the exact same design.
the fact it takes an expert special custom tools and several minutes shows how well this lock was made
Yet he rated it "low end of high security".. he's basically just Simon Powell of locks
@@scootndute579 the fact that he considers it as any tier of “high security” is quite the merit
Especially since the lock for him is in ideal conditions, it'd be considerably more difficult in the field.
@@scootndute579 well think about it, this isnt high end, its a lock you can buy at a store, high end is like a fuckin vault or a fully steel safe
@@scrithen2836 it is high end for a padlock.
The fact this lock took just shy of 3 minutes for the LPL to pick tells me that
the worlds nuclear warheads should be secured by theses Abus locks!! 😁😁
lol
They're secured with something even more impenetrable than an Abus lock: 8" floppy discs.
@@DangerB0ne there goes my bright idea.
Russians: proceed to track every lock delivery and place explosives at destinations.
USA:🌋
@@DangerB0ne and yes, those floppy disks are actually the "floppy" kind, not the hard plastic kind.
Imagine if LPL was a dentist instead.
"Molar is loose, canine is... Binding, there's a click on the premolars..."
Full mouth extraction indicated...
And there we go all the teeth come right out. The problem here is you don't floss
"26 year olds canines extracted with a twig!"
We need a ToothPickingDentist!
_Fills a cavity_
Now let me extract the filling and do it again to prove it wasn't a fluke.
"What doesn't come through in the video is the amount of skill that's required"
Trust me, with as long as it took you to pick it, that came through
Right? With most of these videos, I think "That doesn't look so hard. I should really try this."
This video: Do what now? The heck is going on?
I bet the guys at the lock office cheered and high fives after this, great video
Yea.. given most of his picks are usually < 1min, anything over 3 is just bonkers.
fr if it takes him more than 45 seconds to pick I'd use it
Also the intent silences that spaced what he was saying.
As far as marketing goes, praise from The LockPickingLawyer, especially him saying that it's a lock he'd use himself is a HUGE deal in my opinion.
At least with the customers / security professionals it matters.
I agree! It's almost like he should be receiving a check from Abus soon haha
Agreed, this will be my next purchase
While I would agree with you, we still have to acknowledge the reality and state that in order for this to be truly effective marketing it would need considerably larger demographic being aware of this along with his proficiency in picking.
@@mattk1693 He doesn't want a check...LPL wants a Partnership =))
It's 140$ per piece lock...so it better be good.
You should make a playlist of LPL approved locks.
That'll be a short video
@@Robert-cu9bm He wrote _"a playlist"_
@@bsvenss2
Exactly, I've only seen this one he approves.
You just watched the entire playlist!
@@Robert-cu9bmthere was a lock with a y-shaped key with 14 pins on it that he was very impressed by. Cannot recall the manufacturers name.
This is the only channel I know where 99.99% of products reviewed are flawed. Once is a blue moon, comes this golden egg.
A long Lock Picking Lawyer video on a single lock? That's the lock you need!
That's what i was thinking, This lock took him 4 minutes and lots of concentration to get it open, I'm convinced that this is the lock i want to get
unless he opens it 10 different ways in that time.
I love your music, man.
take a look at his older videos
It's on Amazon for $125. Heh. If I used that on my garage, when my car was out it would be the most expensive thing in the garage.
I was wondering what makes tlpl videos always so good, then I realized: they have a lot of tension
Booo 🤣
There's definitely some amount of drama in his storytelling. We know the ending, but not the conclusion.
booooooo take my like lol
Tension is the key to a picking video.
Tension is the starting point to bypassing the key elements of any obstacle. Especially the ones you pick yourself.
When the time to pick it is longer than a lot of LPL's videos, you know you have a winner.
You know it's German
@@accesspoint6917 You do know one of his higher-rated locks is the US-made Commando, right?
One of the few people who can bluntly say how good he is at something without a hint of bragging (and without any argument from anybody!)
The amount of time it took LPL to open this definitely illustrates the difference between a cheap disc-detainer core and a quality one with more discs and false gates. I'm sure even with the correct tool it would stymie a novice picker for a long time. Looks like Abus put some thought into this one and took feedback from pickers or at least picking videos when they engineered the core. I'm not sure if I have anything with a hasp good enough to hang a lock like this on.
Even regular ones can confound a novice picker.
You did catch on to something if the hasp isn't as strong you would probably just use that to gain access.
Look up the price and it'll explain everything
No worries. Abus makes some beast Granit hasps as well. The hard part is finding a building or door strong enough to mount to!
@@TechHug $75-$120!!!!! Yeesh. But, it took LPL minutes to pick and he was having difficulty so it is def worth it on premiere applications.
What I love about this video is when LPL says "This has a butterfly disc so it can't be picked with a tool like this. Now I'm going to pick it with this tool anyway." Nice job!
Chad. Truly a God amongst men
Yeah, I don't get that.... did abus not make them right? Why didn't they work?
@@rupedog He explains near the end of the video - The "Butterfly" disk makes tensioning off the first disk prevent the lock from opening. So he circumvented that by tensioning off a disk further down the core.
@@Jaccep which only worked because that disk happened to be a zero cut. What if there was none of those?
@@Chuckiele then the lock wouldn't work.
LPL: casually picks Masterlocks with household items
Also LPL: What you don't see in the video is that I actually had to concentrate.
Holy cow!
Right? That's extraordinarily high praise from LPL.
We have sold dozens of these 80 and 60 models. Tenants love them. The removable shackles are awesome and the beefy design leaves no doubt it is simply one of the best available anywhere.
When you're at the 3 min mark and it's still not picked you know it's not that bad of a lock.
when it has "A padlock I'd use" as the title of an LPL video, you know it's a *great* lock.
I was actually getting bored and put the phone aside for a second and that was the moment I realized I had witnessed something extraordinary.
Been watching this guy for years. I’ve never personally heard him recommend any lock this is insanely high praise.
it has happened a few times. You sometimes have to really listen to what he has to say.
There was this Bowley lock that he didn't even try to pick.
@@NotMeButAnother which episode number?
I believe he recommended a Kryptonite bike chain/lock as well! I purchased it for my bike immediately.
He has good things to say about Kryptonite in general. It's why I use one of their chain locks to secure my bike in the field.
Wow, this is the most challenging I've ever seen him go up against.
Great padlock.
I think I'll be getting a couple of them for my home and tool shed.
Thank you LPL, I appreciate you sir 👍👍
The ABS Eurocylinders are another lock he praises.
I must say, as a person who has worked with his hands most of his life, this man is simply amazing…. I would love to do an apprenticeship with him!!!
Yes.
The Abus executive are having a great day. And at over 8 minutes that show the quality that went into building this lock.
Yeah, they are high fiving all around the room.
I read: "at least 8 minutes went into the design of this lock"...
@@laptopdragon its true
The picking itself was completed in 4 minutes. Even this is a ringing endorsement, though.
4 of that is the disassembly.
You know you're a winner when you have 3.65M subscribers who really are not into locksmithing. This guy is just so entertaining and proficient. Everyone loves a genius.
I hope you are correct or millions of people will be casually picking locks and taking things.
@@MrTruckerf LOL !
@@MrTruckerf A lot of us are pickers, but I suspect it's less than half, and I suspect many of those are doing it on occassion, and not as a dedicated hobby. Unfortunately, it would have no bearing on theft, as the vast majority of thieves just resort to the quickest destructive force they can dish out. Most home burglaries are less than 5 minutes overall, and they kick in the door to gain entry. They go straight to the master bedroom and toss it, which is where most people hide money, jewelry etc. that can be unloaded quickly and difficult to trace.
Confirmed 'non picker' here, as I've only ever used bolt cutters or bullet to bypass locks; he is incredibly entertaining and I've had a growing interest in learning some of the (no offense intended) easier lockpicking and bypass methods simply out of personal curiosity. He does make it look easy but most masters do.
I own a set of picks, but apart from raking open a 2€ padlock my picking skills are none existent.
‘Only an exceedingly skilled picker could open this in the field’
Everyone who ever bought the pick that LPL and Bosnian Bill made now own the Granit padlock and a month on, it’s still locked… 😉
This seems to be a lock where it would be easier to disassemble everything around it instead of the lock itself to get to what it protects.
It can't be non destructively disassembled with the shackle in place, i.e., locked.
It’s lovely to hear praise for a product - and it feels like an age since a disassembly. Thank you LPL!
Didn't we have one just a few days ago?
It's been like 4 videos
It took almost 3 whole minutes for an extremely experienced picker to pick open this lock…very impressive indeed!
With a custom tool to boot!
LPL an "extremely experienced picker". Like Gretzky or Ovechkin are "extremely experienced hockey players" :D
@@igmusicandflying ...or the Pope is a little bit Catholic.
@@fastmadcow and in optimal conditions. Even with the right tools, how much longer would it take to do this under stress?
Longer than it took to pick the entire collection of Master Lock products on his channel.
Finally a worthy opponent to LPL! Getting praised from him and the video length speaks volumes about the lock!
Would be a definite buy for security. Also, the tool which LPL and Bosnian Bill created is wonderful and it's great to see LPL mentioning it in every video where he had used the tool to attribute that himself and Bosnian Bill had created the tool! Man of words and really appreciate the friendship, honor, respect and integrity LPL has on Bosnian Bill!
No words to express any more gratitude. Nothing but thank you so much LPL for such wonderful videos, advice and insights into the lock picking and the lessons on various methods, safety and security features of locks with unseen / unheard information that you provide on each and every bit of the materials, working mechanics, etc., etc.,
I could go on for a long time, but thanks again from India! I truly have learnt a lot from your videos (still learning) and trying to enhance my skills on a day to day basis in the magical world of lock picking with your videos!
Thanks again! Wishing good health to everyone in this world!
Let this world be a peaceful place!
Let the almighty god or supreme power bless everyone with abundant health and wealth and security!!
Funny how you mention security when this whole channel is about picking locks.
I dont' know exactly what he is doing when he discovered 5 is a zero cut and then tensions off of it to open the lock, but I am blown away every time I see him do that. Love watching him work.
don't*
When you said false gates, "aren't particularly hard to put in from a manufacturers point." That has to be a jab at the companies of like, "its easy to make your locks better so do it!!!"
1-8-22
Ahem, Master Lock.
@@michaelschlem2849 Master locks do not have DD locks yet. LOL.
@@ipick4fun27 pretty sure they don't have many, but at minimum they have the 8184d
It kinda feel like a small manufacturing error could even turn into a false gate on these kind of locks :P
@@ipick4fun27 Of course not. They'd have to produce locks instead of lock-shaped decoys first.
Abus having a party right now.
I have one of this series, it's been outside hanging for 2 years, it's amazing and looks and feels like new to this day
That was the longest I’ve seen you work a mechanism in a while. Thank you!
"very unlikely to be pick in the field"
Ah, crap, gonna be sold out everywhere.
"this is certainly a lock I would consider using"
Ah, crap, it's going to stay sold out for a while!
I've got to say, as entertaining and educational as it is to watch you open so-called high security locks as if they were child-safety latches, these videos where you cover locks that turn out to be good have practical benefits that are hard to beat. Thank you, and keep doing the good work!
It's a $100 padlock. It's not going to sell in droves, regardless of how good it is. People are barely willing to spend $20 on a padlock.
The padlock is massive. I own one myself. For gym lockers and things like that, this lock won't do, this is a padlock that is designed for shipping containers and such. You come to a point where the lock is so insane, it's easier to just break whatever the lock is protecting. So if you are going to spend 100-200$ on a lock, you have to make sure that the material where you are attaching the lock, can't be broken in matter of seconds, or else it's just a waste. So this lock has limited use.
@@FabledGentleman they need a "family" of them a smaller "gym locker "friendly" version as IMHO that is the BIGGEST security vulnerability most people have
@@jasonriddell that's what the DISKUS locks are for. They're not disk detainer, but they *are* a heck of a lot better than a Master 141... if you wanna get really with it, a DISKUS 25/70 is a dimple key cylinder, no average raker is gonna get that... or if you're REALLY serious, an Abloy PL-321 with a Protec2 cylinder. Although given most gym lockers, a savvy attacker would just show up with a big set of vise grips and use the Abloy to wrench the hasp off the locker.... that's not gonna be nearly as simple with a DISKUS. Doable? Probably. Pain in the ASCII; they're gonna go look for another lock. Both of these guys are way less dosh than the Granit.
@@stonebear I thought some of the Diskus line did use disc detainer cores. Like the 20/70. It claims to have the ABUS Plus disc cylinder. I could be wrong and mis-remembering though.
A padlock he'd use? That explains why it's already sold out.
Sold out? I just found them on multiple sites before purchasing
"This is certainly a lock that I would consider using" praise like that coming from LPL, I'd trust my entire families safety with this thing 🤣
I am speachless! You are incredible. I watch these videos and get stunned every time. Thank you
Having seen you pick over a hundred locks by now, i most certainly got the sense of how difficult this was in terms of picking.
I could tell it was very difficult judging by the things
1000 locks by now
Yeah not only did it take quite a long time for him, but also we didn't even get the famous "nothing on 3, nothing on 4, 5 is binding" on every single one at least
I gave my best friend a smaller version of this lock for his birthday in 2019 and it's the only lock he hasn't been able to pick yet. I am happy that I can now show him that it is possible :D
But does your friend have “the TOOL”?
@@steveb7310 That Bosnian Bill and LPL made
@@pixelettee exactly.
@@steveb7310 He'll have to get that for the next birthday 😉
That's like giving your friend a bow and some arrows for Christmas, showing him a video of an Olympic archer hitting 20 bullseyes in a row, and saying, "See? It's possible!"
The skill required did really well come through, I was amazed by how you seemed to be able to 'see' inside the lock. Amazing!
Thanks for sharing.
LPL: “This is certainly a padlock I would consider using…”
*sales immediately sky rocket minutes after the video is posted*
I feel like there is a room of Masterlock designers crying in a room somewhere as they dream of hearing those words one day
Maybe that's the problem with Masterlock, they only have 'designers' and forgot to hire any engineers.
Anyone who watches this channel definitely saw the skill required. The amount of time you spent on each disk alone much less all the fiddling you had to do on each one shows how hard that was.
Yeah, and you need to know "when you have it" to be able to find the zero cut to tension off of to open the lock.
Plus you need the right tool !
We have those Locks at work, securing hazard material containers wich are outside in the open. They are rated as weather resistant, but after a year or so, they get impossibly hard to open. greasing them once every 3-4 months is a must. Other than that, they are exceptionally tough, our Janitor once had to cut one of them open - his old angle grinder was not up to the task.
I am not longer on the coast but 90 miles / 150 km inland and have had mine for a few years and it opens smooth as can be. One of the reasons I like the lock. I pretty much just bought it for the build quality as others have noted the lock is generally overkill unless you are putting it on a pretty well guarded and hardened facility.
That was literally the most I've ever seen you struggle to pick, great job!!!
This is basically the LPL feature-length movie.
Hi from Germany! This explaines a lot! At first I thought someone just has slept thru new years and now celebrates it a week later now, because I heard fireworks and champaign popping noises. But then I saw this video.
The fact that everything around the lock will be destroyed, as an easier solution than picking, is re-assuring.
Angle grinder. LOL. still take 30-40 seconds. But picking is non destructive means of opening a lock
@@ipick4fun27 certainly not stealthy, but fast AF
@@ipick4fun27 Yea, was gonna mention, the easy way out😆
40 grams of C4... on the haps that is.
A Chain is only as strong as its weakest link.
Very fair demonstrated how long it takes to pick it.
You as the best picker I know needed more than 3 minutes to open it.
So it‘s save enough for common use.
Thanx for your job, move on 👍🏼
Please sorry my bad english, I always slept on english-lessons ;)
I love listening to you pick the locks. I finding it very suthing and you are always successful.
Thanks for all your videos.
You know when he spends more than 3 minutes picking a lock, it's proper quality.
Typically over 1 minute is a ringing endorsement for doing something right.
2 minutes is stock affecting. And 3 minutes is downright unheard of!
And when he grabs for the rake it is crsp.
LPL: This is certainly a lock that I would considered using.
::: Goes to website to order :::
Website: On backorder. Restock date unknown.
Me: Dammit!! (using Cartman voice)
I bought mine years ago when I did my own research. Win. Once this whole Brandon situation clears up, Abus will be able to increase manufacturing again.
They are available on Amazon. $126.
The lock also exists in another model. 37RK/70.
@@logmeindog "Brandon" situation"? Are you somehow blaming Biden for Abus Manufacturing issues? Abus manufacturing is in Germany and China. Not sure why you're blaming Biden for any issues on their part when their facilities aren't in the US.
@@Jhaiisiin You obviously watch too much CNN to realize the docks in America are being backed up because of Biden's mandates and not rerouting the traffic.
Love to watch you work, LPL. ❣️ "A padlock I'd use". Coming from you, that's a real endorsement for ANY lock. 👍
Well, there's some excellent recommendation for you! Celebrations at the factory!
If it takes LPL this long, I'd imagine an average picker even with the right tools would have given up and looked for another security flaw, like in the chain or hasp it's locked to
Some poor bloke commented that somebody rather than dealing with the lock bashed down the wall of his hauler xD
Yeah, someone broke into a uhaul with this on it, by forcing damage onto the door at several points to take down the door, despite also having tried and failing at damaging and disabling the lock. You know the lock alone wasted an hour.
Apparently, where this lock is concerned, the *wall* could be considered the weak link.
You should do a video for your highest recommendation locks for different categories (padlock, deadbolt, trailer lock, etc) and offer both the best most expensive option along with a budget “runner-up” alternative. Your wealth of knowledge would have me buying a lot of locks in very short order!
Depends on what you're locking up, and whether a $200.00 lock is worth it if there are other easier ways to steal it. I've seen an Abus padlock on a hasp installed with the screwheads exposed.
Came back to this video 2 years later since I decided to upgrade security for my motorcycle. Decided on getting this lock since I remember this being a recommendation from LPL. Now that I have it, I can definitely say it is a beast of a lock! Worth every penny!😊🔒
I've had one of these for about 2 years, I got it for one of my dad's gates that we never use. He didn't like having another key so he just used a masterlock.
Couple days ago I decided to buy an abus 130/180 shackle and use it on my shed lol. A bit overkill, but at least the lock won't be the weak point
The pinnacle of award any lock manufacturer can have: a long video of LPL trying to pick it.
The lock designer team should deserve a big fat bonus pay check.
Woah-up there buddy, Not so fast with the pats on the backs with sacks of cash! Make them dig a little deeper and design a lock that Defeats LPL! Then you wouldn't need to pat them on the back with sacks of cash because the sales of a lock capable of the feat would drown the company in orders and wealth unimaginable.
So nice to see the gutting. Makes you appreciate the engineering of the mechanics of the lock!
I'm glad he finally pulled apart a disc detainer lock. It's not clear from picking how those things even work.
it looks so simple after gutting concidering how long it took yo pick
True, but the main purpose of the gutting is to prove that what he picked matches the difficulty of his what he claims. Not that anyone doubts him at this point, but it's a show of integrity.
this is the first time i've seen you post a lock you'd actually be willing to use. thank you!
I’d like to see you pick some locks that aren’t sitting on a table, but rather them being used in real life situations. Great videos though!!
What's the difference? He can pick the lock. If the lock was positoned in an inconvenient position or angle, maybe it would take him 5 or 10 minutes instead of 1 or 3 minutes to set himself up and get the thing open.
Watching this was like watching somebody play the final boss and win. My heart was pumping.
It didn't feel like 8 minutes :o
I'm just here to comment that the ABUS team is probably having a huge celebration party, as well as giving everyone a raise.
I doubt that
@@jtcmule3336 They're Amish community stronghold, so I double doubt it!
@@TheGeezzer Isn't ABUS a german company?
@@DrBastycore They are, Abus is short for "August Bremicker und Söhne". They are known to be extremely religious for German standards and belong to a faith that the English wiki calls "Plymouth Brethren", a small protestant faith. It's one of the more ... conservative ones too, not to the level of the Amish, but they don't really believe in equal rights for women and such.
Would be fun to get Twitter mad about it :)
@@BL-yj2wp Ah, so it's for their wives chastity belts? No wonder LPL struggled.
You are "the LockPickin' God", mate!
For sure!
This thing is so complicated and so well made... But you got it!
Very well done, sir!👍🏻👍🏻👍🏻
Bosnian Bill was the first lock picking channel I found and was the reason for my interest in the craft. Was disheartened when he left his channel. But I understand his reasoning. I have followed you since. Was happy to hear you mention him. Thank you Sir.
Hi, if I may ask a favour, once in a while, can you please let’s us know how Bill is doing if you still stay in touch. Thanks very much for all you do for the viewers.
I second that request. God bless you, Mrs LPL, Bosnian Bill, and his family.
Would like that too, if you have time, LPL.
i love seeing locks that you actually recommend, they're so few and far between, i would also like to see those false gates just a little deeper, and the shackle guard at least upgradeable to a hardened steel one. great job of showing us this lock, and as always, thanks for all the enjoyable content!
I guess if you make them too deep they risk becoming true gates...
Thanks for showing mechanism, great lock indeed.
One of your very best video’s. Superb presentation!
Less than two minutes after the video goes live, this lock is not available anywhere on-line
People saw the title and mad dashed it to buy everything
Check ebay
Well I haven't looked very far, but I could buy one right now on Amazon UK (£140.95) for delivery tomorrow...
I love the way that on the Amazon UK page for this lock, the "Amazon Basics AB-PL100 Padlock - Stainless Steel" lock is listed under the "Similar item to consider" title. I suspect that LPL wouldn't consider that anywhere near "similar" - the only thing similar is that they are both technically a lock!
*looks* well, if the key for that item is shown accurately, it *is* a disc detainer lock, which, if it's also got a proper ball-bearing retainer, is WAY better than a Master 141...
It's an Amazon Basics article - they plug those on anything that has a passing resemblence to a distant relative of someone who once saw the original article from a distance.
@@LemuriaGames Some Amazon Basics products are pretty bad. I wouldn't trust them to choose a good lock manufacturer.
I don't know if you've read my comment suggesting you open another channel, featuring locks that give you trouble.
But this one was so much fun to watch, and I enjoyed every single minute of it.
Thank you!
"This is a lock I'd consider using..." - The Lock Picking Lawyer. That will now be the branding on every lock that meets his approval on the packaging of these things going forward
I don't think I've ever seen him take that long, that is one impressive lock!
ABUS Granit lock project manager: we did it, Joe!
And a bonus "the pick Bosnian Bill and I made!" mention!
It's a pleasure to watch such obvious skill at work.
what a sick hobby. I would love to learn. Huge respect for your knowledge and precision.
Ahhh great videos like this make me miss Bill so much.
As seen on the LPL, the only lock to take over 2 minutes to pick. The Abus 80! New ad coming!
It's far from the only one... but it's still something.
It’s the only one if you’ve been watching for a year or two. In the past he mostly made videos on great locks and every once in a while would do trash locks. Now he only does trash locks
@@HiHi-oc3gh … he ran out of good locks and 90% is crap anyway?
Just went to a padlock shop, had trouble on deciding what padlock to buy. Just checked the title of this video and immediately bought this one. Thanks for helping with the decision, even tho the lock wasn't cheap, but I am not complaining :D
It's so nice to see a lock that you would recommend👍
For everyone who constantly asks "What lock does LPL recommend?" here you go. Your prayers have been answered.
I for one am happy as a pig in mud for it
they'll complain it's too expensive, you know
@@marcogenovesi8570 It would be nice if it were in a smaller lock. For some applications I'd like to use it for the shackle is too thick. A Master Lock #5 is the largest. 14MM is just over 1/2".
@@marcogenovesi8570 It's a $125 for both the lock body and the cylinder. The cylinder on my front door alone is about that much...
This is a fantastic lock, took this guy some time and he had a specialty tool, skill with this style of lock, optimal holding angle under optimal lighting, was indoors and probably seated and calm. Rather than say trying to bust open a trailer at a truck stop with constant traffic some of which is probably state police, at night in possibly less than optimal weather and a truck trailer is certainly not at optimal working height for picking.
Not only that, but 'in the field' there's probably a bunch of other potential trailers to choose from with far shittier locks
It’s amazing the talent this guy has
I cant imagine the happiness of the engineers that designed this looking at the vid
"Then I'm going to get the pick"
Crowd gasps
"that Bosnian Bill and I made"
Crowd erupts! Goes wild. Screaming, cheering, shouting. Revelry everywhere!
High praise, better get one quick. over two and half minutes to pick.....
This is very cool to see and I love the cautious recommendation. At this point you really have to evaluate what you're locking because the lock could be stronger than the chain/bracket/door that you're locking!
I love watching u pick all the locks its amazing