It looks like utter garbage in mine and most others opinions. Just waiting for PDMG to release the 737 NG… If you’re looking out for airliners, be hyped for the FlyByWire a380, and the a350 from Digital Flight Dynamics. (As well as the well overdue PDMG 737!) So while yes right now there isn’t a lot in terms of airliners, they are coming eventually 😂
@@OscarHines I dont really care what you or others think about this plane. I dont follow the heard. I just enjoy what I enjoy . A lot of my friends enjoy this plane as well, you are right Oscar there will be a lot of better planes coming. Have fun ,cheers.
I loved that thanks it was simple and easy to understand. I will try it ,I have mostly begun" at start on the runway " which becomes a bit boring. Well done mate good job
Don't forget to disconnect the ground power :) Otherwise its very close to what I do you have a few more steps that I want to work into my start up. Maybe I will make a video as well one of these days.
Not that it makes a difference, but my engine start knobs in the bottom middle of the upper panels will not go the “flt” with 2 clicks. Mine go from “off” to “ grid” but not to “flt”. But the engine stay started anyway Great video
Talk about frustration... I cannot find any tutorial on how to shut off the engines of yhid sircrsft!! Most tutproa;s I've seen are about starting up the engines. Can you help? Thaks
I think I'm gonna wait until the PMDG Team release Boeing 737 aircraft...otherwise, I don't wanna upset or frustrated Bredock's Boeing 737 Max aircraft... I also think that I'm gonna stick to use A320 to fly with...
Great video friend. But you only turn on strobe light when you entering a runway. Otherwise I love your video. As for the aircraft, it’s not that bad. It responds well to flight but its interior design is slightly not realistic in graphic texture. But I really love flying it. I hope someone create the older Boeings like the 737-200 and 747-200. Thanks again for your video👍🏾
still very wrong mate. For example the electric busses. What you did was first you started the APU bus (way to early also, it should light up before you turn it on), to then start the gen1 which is the engine generator and can only turned on when the engines are running.... Same for the bleeds, you first click the APU bleed, and then the engine bleed. Not only are the engines not running and thus they don't provide any bleed air, it also cancels the supply of apu bleed which you should need for engine start. I don't know if all the functions actually work in this version, but there are plenty of 737 tutorials online. Look for "zibo 737 cold and dark procedure" and you will figure out how the genuine plane works. Very cool that you are trying to teach people, but I feel like you have the responsibility to actually get it right. Edit: Seeing you start the engines I know that literally 0 of the systems actually do anything... xD There is no way you would be able to get them running in any proper 737 sim. xD
I did not say this is the right way to do it. I was showing people how I do it. and said they are welcome to correct or tweak it. Did you listen? I'm happy to hear helpful suggestions,
Sorry Anton I know nothing about the fmc yet. I do all my planning in the games planning menu. Im not a tecky person so hopefully someone here can help you,
I would like to add that I really enjoy your streams as they are aimed at the ordinary simmer, not the high flyers. Oops sorry about that pun. Keep up the good work. Are you guys still locked down?
I am having issues on the Xbox Series S. I have followed this tutorial (and other similar ones) to a T but the external power always seems to either never turn on at all (even though it says it is) or it shuts down mid pushback. Is anyone else having the same issue on this platform?
HI Ollie. yea a common complaint i think. Do you turn on battery power and land power? I used to just hit cotrl e out of frustration. sorry im not to helpful sorry. Cheers.
@@officialdjvollmer it has been updated since release, it is not a study level plane so the big time experts dont like it, i think its great and i dont care what they think. like anything you just need to spend the time to master it, :))
The way the overhead panal works in the sim, is completely wrong compared to the real aircraft. And by the way, your parkingbrakes were not sat in the beginning, in real life you have to push down the brakes, and pull the lever.
@@jet-inairwaysvirtual.4290 No worries, I fly the 738NG and I have the diff course on the 737-8(max) :-) Can’t wait for PMDG, to finish up their B737NG.
Everyone seems to dislike this aircraft, but as I only have msfs, it’s nice to have an alternative to the a320 all the time. Thanks for the tutorial 😀
Im growing to really like it. as you can tell ha.
And I think you will find it is getting a very strong following now. Have a great day, keep safe.
It looks like utter garbage in mine and most others opinions. Just waiting for PDMG to release the 737 NG… If you’re looking out for airliners, be hyped for the FlyByWire a380, and the a350 from Digital Flight Dynamics. (As well as the well overdue PDMG 737!) So while yes right now there isn’t a lot in terms of airliners, they are coming eventually 😂
@@OscarHines True. PMDG 737 should be out by around the start of next year.
@@OscarHines I dont really care what you or others think about this plane. I dont follow the heard. I just enjoy what I enjoy . A lot of my friends enjoy this plane as well, you are right Oscar there will be a lot of better planes coming. Have fun ,cheers.
Best cold & dark I've seen. Thanks its my favorite plane.
thank you Don. have a great day :)
You forgot to turn on hydraulics and so fire tests prior to powering up APU and Engines.
And it is a good practice to start one engine at a time.
I loved that thanks it was simple and easy to understand. I will try it ,I have mostly begun" at start on the runway " which becomes a bit boring. Well done mate good job
good vid if Ur not fussed about realism
exactly :))
Don't forget to disconnect the ground power :) Otherwise its very close to what I do you have a few more steps that I want to work into my start up. Maybe I will make a video as well one of these days.
Great tutorial, I also struggled to find tutorials, my startup differs slightly but is very similar, keep up the good work
how does yours differ?
@@jet-inairwaysvirtual.4290 standby pwr to batt, battery, emer switch, external pwr, 6 fuel pumps, engine mode selector to GND, apu bleed, engine bleeds, eng gen 1 and 2, elec 1 & 2, APU master on, APU gen, beacon light, engine master 1 &2, APU starter, wait for engines to fully start, engine selector CONT, APU master off, external pwr off, done. Just slight changes from yours
@@gcookscotland7085 very good. so im on the right track ha,
Very well put.👌🏾😁Thank you
Not that it makes a difference, but my engine start knobs in the bottom middle of the upper panels will not go the “flt” with 2 clicks. Mine go from “off” to “ grid” but not to “flt”. But the engine stay started anyway
Great video
Talk about frustration... I cannot find any tutorial on how to shut off the engines of yhid sircrsft!! Most tutproa;s I've seen are about starting up the engines. Can you help? Thaks
Will look at this in my next vid. But im not an expert. cheers.
Thanks for the clear tutorial mate!
Your welcome.
Do any of your tutorials include inputting flight plan at the FMC through to landing and park up ?
I dont think I have those all in one, but can see it over a few vids, several vids will cover all of that I think. cheers mate.
Thank you so much for this great tutorial
Your welcome.
I think I'm gonna wait until the PMDG Team release Boeing 737 aircraft...otherwise, I don't wanna upset or frustrated Bredock's Boeing 737 Max aircraft... I also think that I'm gonna stick to use A320 to fly with...
yea the 320 is a nice looking plane, have fun mate. William
Yeah my display screens are just black, do you know why, but anyways great tutorial👍
sounds like you are not getting any power,,,
Great video friend. But you only turn on strobe light when you entering a runway. Otherwise I love your video. As for the aircraft, it’s not that bad. It responds well to flight but its interior design is slightly not realistic in graphic texture. But I really love flying it. I hope someone create the older Boeings like the 737-200 and 747-200. Thanks again for your video👍🏾
Thank you soo much!
your welcome
Thanks for the helpful video! I’m struggling with the 737 systems. Does anyone know why the external power switch doesn’t work? It has to be a bug.
yea. after update 7 my external power wont come on. i just use battery power seems ok.
Thank you!
still very wrong mate. For example the electric busses. What you did was first you started the APU bus (way to early also, it should light up before you turn it on), to then start the gen1 which is the engine generator and can only turned on when the engines are running.... Same for the bleeds, you first click the APU bleed, and then the engine bleed. Not only are the engines not running and thus they don't provide any bleed air, it also cancels the supply of apu bleed which you should need for engine start.
I don't know if all the functions actually work in this version, but there are plenty of 737 tutorials online. Look for "zibo 737 cold and dark procedure" and you will figure out how the genuine plane works.
Very cool that you are trying to teach people, but I feel like you have the responsibility to actually get it right.
Edit: Seeing you start the engines I know that literally 0 of the systems actually do anything... xD There is no way you would be able to get them running in any proper 737 sim. xD
I did not say this is the right way to do it. I was showing people how I do it. and said they are welcome to correct or tweak it. Did you listen? I'm happy to hear helpful suggestions,
why winglets doesnt work in bredok 737m/
Sorry I have no idea,
Hi, i have ATT messages on screens and no flightplan page in fmc, what do i do?
Sorry Anton I know nothing about the fmc yet. I do all my planning in the games planning menu. Im not a tecky person so hopefully someone here can help you,
Sorry Anton im not a tecky person, good luck with it. William
I would like to add that I really enjoy your streams as they are aimed at the ordinary simmer, not the high flyers. Oops sorry about that pun. Keep up the good work. Are you guys still locked down?
yea, another couple of weeks things will ease up. cheers
@@jet-inairwaysvirtual.4290 how come my flaps don’t stay down before takeoff, they keep retracting
@@chuck176 mmm I have never had that. is auto pilot off? flight director off?
@@jet-inairwaysvirtual.4290 oh Thabks I’ll have to check that out
I am having issues on the Xbox Series S. I have followed this tutorial (and other similar ones) to a T but the external power always seems to either never turn on at all (even though it says it is) or it shuts down mid pushback. Is anyone else having the same issue on this platform?
HI Ollie. yea a common complaint i think. Do you turn on battery power and land power? I used to just hit cotrl e out of frustration. sorry im not to helpful sorry. Cheers.
Merci c'est très bien
Thanks for making this video! Is this the BREDOK3D - BOEING 737-MAX?
yes
@@jet-inairwaysvirtual.4290 It looks great inside and out why is it getting so much hate?
@@officialdjvollmer it has been updated since release, it is not a study level plane so the big time experts dont like it, i think its great and i dont care what they think. like anything you just need to spend the time to master it, :))
@@jet-inairwaysvirtual.4290 thanks for the reply! Happy flying:)
The way the overhead panal works in the sim, is completely wrong compared to the real aircraft. And by the way, your parkingbrakes were not sat in the beginning, in real life you have to push down the brakes, and pull the lever.
ok thanks,
@@jet-inairwaysvirtual.4290 No worries, I fly the 738NG and I have the diff course on the 737-8(max) :-) Can’t wait for PMDG, to finish up their B737NG.
@@Pilotfarmand im just for fun. but always appriaate helpful comments, cheers
PMDG 737 should be here early Jan, hoping.
How do you get the updated version of it
i have a vid called how to update,, have a look at that. cheers
Ok thanks and thanks so much for the info that you do