Ryco Universal Catch Can Install YD25 Navara

Поділитися
Вставка
  • Опубліковано 6 сер 2022
  • Here is how to install a Universal Ryco Catch Can Kit onto a D22 Navara. This kit comes with just about everything that you need to install on a D22. However, you will need to buy extra hose if you intend on mounting in the same position as in this video. The PCV hose Internal Diameter is 16mm.
    The installation was very simple however the instructions are not vehicle specific and you will need to have a basic understanding of the PCV system and the catch can itself.
    Here is a Link to the Ryco Catch Can
    ebay.us/GR8u4q
    When you click on the above link and make a purchase, this can result in myself earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
    Thanks for watching, if you have any questions use the comments below.
  • Авто та транспорт

КОМЕНТАРІ • 17

  • @bentheguru4986
    @bentheguru4986 2 роки тому +2

    Finally, a half-decent looking option to the Provent 200 knock-off's flooding the market.

    • @ReubsModifications
      @ReubsModifications  2 роки тому

      I thought so, in my experience Ryco is a quality brand so we figured we couldn’t go wrong with this kit 👍🏻

  • @rocknral
    @rocknral 2 місяці тому +1

    Are you saying the bottom large connection is the "in" side? 0:27

    • @ReubsModifications
      @ReubsModifications  2 місяці тому

      Yes however check your installation guide as there might have been changes since I made this video.

  • @ZH-ls6nb
    @ZH-ls6nb 4 місяці тому +1

    What about seals problem with that device? Oil leaks on engine?

    • @ReubsModifications
      @ReubsModifications  4 місяці тому

      Hey mate not sure I understand your question, can you explain it further?

  • @liamyoung3867
    @liamyoung3867 Рік тому

    Hey mate I’m so stone bench top installing in my d22 yd25 and carry a lot of weight is a ecu remap save and worth it as I do a lot of kms so reliability is main thing

    • @liamyoung3867
      @liamyoung3867 Рік тому

      Safe

    • @liamyoung3867
      @liamyoung3867 Рік тому

      Stage 1 cars fully stock recurve are doing it in north lakes not sure about them ?

    • @liamyoung3867
      @liamyoung3867 Рік тому

      Want power and reliably at the same time if that possible from the stock d22 without doing any damage or uprgrading engine parts

    • @ReubsModifications
      @ReubsModifications  Рік тому

      I cant say as I dont know too much about the YD25s but id start by addressing the common failures such as the timing chain if you want reliability

  • @busayaphatchinchaibun6473
    @busayaphatchinchaibun6473 2 роки тому +1

    What's your thought on creating more power from the YD25, mods etc?

    • @ReubsModifications
      @ReubsModifications  2 роки тому +1

      Unfortunately I don't know too much about the YD25 engine and its capabilities. I am in a D22 forum and see some posts every so often about power mods, it looks like swapping the turbo from a D40 Navara is a common mod to increase power. That's about all I know, I'd suggest joining a facebook group and get in contact with people who have already built YD25 Navaras 🤙

    • @busayaphatchinchaibun6473
      @busayaphatchinchaibun6473 2 роки тому +1

      @@ReubsModifications will do cheers mate👌

    • @ReubsModifications
      @ReubsModifications  2 роки тому

      @@busayaphatchinchaibun6473 no worries 👍🏻

  • @kurtmcl
    @kurtmcl 2 роки тому +1

    How much?