How To Replace Front Air Suspension Shock on CLS550 Mercedes | Struts for CLS-Class Mercedes W218
Вставка
- Опубліковано 21 вер 2023
- CLS550 Suspension Shock Change | How To Replace Front Air Suspension Shock on CLS550 Mercedes | Struts for CLS-Class Mercedes W218
#HarjinderSidhu #MercedesAirSuspension #MercedesStruts #SidhuDIY
struts CLS - amzn.to/45X1elo
Arnott AS-2788 Front Air Struts for the '03-'09 Mercedes-Benz E-Class AMG and '05-'11 CLS-Class AMG - amzn.to/2lptCXC
🙏 Shop online at Amazon - www.amazon.com/shop/mrsidhu3250
Any Amazon Link in my description is an affiliate link. “As an Amazon Associate, I earn from qualifying purchases.” I would greatly appreciate it if you considered supporting my channel while shopping from the Amazon store by buying anything you needed from Amazon after clicking on one of the links. This gives me a small commission at no additional cost to you and helps me continue producing more videos! Thanks a million for your support!!🙏
Metric 1/4 and 3/8 Drive Socket Set, 40 Piece - amzn.to/2kMvJak
TEKTON 13101 3/8-Inch Drive Socket Set, Inch/Metric, 6-Point, 5/16-Inch - 3/4-Inch, 8 mm - 19 mm, 45-Piece - amzn.to/2lmTbrz
Stanley STMT71654 201-Piece Mechanics Tool Set - amzn.to/2kRJDrs
DEWALT DWMT75049 Mechanics Tools Set (192 Piece) - amzn.to/2lpw14y
4 Way Cross Lug Nut Wrench - amzn.to/2lmLD8f
Heavy Duty Wheel Chocks - amzn.to/2qpRegc
Torin T83006 SUV Service Jack - 3 Ton - amzn.to/2kRJQee
Curved Jaw Locking Pliers - amzn.to/2kRAyyP
*********************************************************
Torque specs:
- Top mounting nuts: 30 Nm
- Air pressure line: 2 Nm
- Upper control arm: (stage 1) 20 Nm then (stage 2) 90 degrees
- Strut to spring control arm: 165 Nm
*********************************************************
Additional items may be used:
iCarsoft scanner - amzn.to/2LswvGt
Engine oil filter wrench - amzn.to/2RBe5o4
oil pump extractor - amzn.to/2WgptpW
oil funnel - amzn.to/2MpzNw9
oil drain pan - amzn.to/2ESkrdz
Hex toolset - amzn.to/2RBA0eK
Toolset - amzn.to/2JZ3LFd
Screwdriver sets - amzn.to/2XydeH3
Hydraulic jack for a car - amzn.to/2ImXZu3
Jack stands - amzn.to/2InmBTd
Wheel chocks - amzn.to/2JWiX63
Toolset - amzn.to/2RUboyd
Torx set - amzn.to/2XHr6Sr
Drill - amzn.to/2RLbXdB
microfiber towels for cars - amzn.to/2Ua8U11
PLEASE SHARE THIS VIDEO! & "GIVE THIS VIDEO A THUMBS UP"
Thank you so much for Watching and Commenting.
PLEASE LIKE, SHARE, and SUBSCRIBE.
{This video is for educational purposes only; Easy Steps assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at Your Own Risk. Easy Steps recommends safe practices when working on vehicles, Computers, Phones, cooking, and or with tools seen or implied in this video. Any Injury, Damage, or Loss that may result from improper use of these tools, equipment, or from the information contained in this video is the Sole Responsibility of the user and not Easy Steps}.
Please leave your comments below if you have any questions or concerns. I hope this helps someone out there. Cheers!
*Disclaimer: All information is for educational purposes only and is the personal view of the author. - Авто та транспорт
How To Replace Front Air Suspension Shock on CLS550 Mercedes | Arnott Struts for CLS-Class W218
How does the 3 plastic strap come off the electrical bracket
Thanks bro perfect video and straight to the point ‼️💯
You are most welcome, glad to help.
Thanks for watching.🙏
Thanks bro so cool 👍🏻
Question: good place to look and buy used parts for 2012 cls550 Mercedes
Thank you 🙏🏻
yo, could you measure for me the length from one shock to another? from the center of the strut under the hood.
thanks!
Thank you this was a great video
Glad it was helpful! Thanks for watching.🙏
What year is this? and is this rear wheel or all wheel?
I am having trouble removing the T-40 screw connected to the stabilizer link. Can you tell me please when you hold the nut with 18mm wrench and loosen the T-40 screw, do you turn the wrench to right or to left to get it loose? I can't see clearly in the video; can you please respond to this question asap cuz I tried working on my car 2 times and couldn't deal with the T-40 screw. I even broke 2 of T-40 screw driver bits in the process and I am beginning to think that I am turning the impact wrench the wrong way (left). I'd appreciate your help on this.
Use boxend wrench 18 mm to hold the nut turn the wrench left while you turn the T 40 torque socket with the wrench right so you turn them opposite and it should open up. Thanks for watching and good luck with your DIY.
Thanks for the video, it was very helpful for me, but I am confused about one thing. At 2 minutes and 4 seconds of the video you were talking about removing something using something you
I mean you can also use a 13/16 socket or 21 mm socket.
So nice of you, Thank you so much!! Thanks for the visit.
😊Glad I could help. 🙏
Thanks for the like and thanks for watching.🙏
Sway bar link....use the T to hold the ball joint so you can remove the nut
Thanks but what are the torque specs for all the bolts?
In the description, let me copy and paste it for you.
Torque specs:
- Top mounting nuts: 30 Nm
- Air pressure line: 2 Nm
- Upper control arm: (stage 1) 20 Nm then (stage 2) 90 degrees
- Strut to spring control arm: 165 Nm
@@EasySteps_Sidhu thanks, I did check there but didn't scroll down far enough the first time!
@@c.a.n.4202 You are most welcome, good luck with your DIY project.