-- I love the Snowdog. It needs a bit more development though; such as a proper EFI motor and more modern track / boogie wheel tech to include modest suspension for smoother cornering.
I see it's chain drive... IDK. Usually snow machine do better with CVT.. It sounds under powered. I think it needs some refinement but could be useful for a winter trap line runner or late season hunting buggy around snow covered fields etc.
it's a 4 stroke so itll always sound underpowered...the 4 stroke guys will love hearing that lol. its chain drive but has a cvt...its a great machine and very tough but it's not meant to be s snowmobile.
You just can't imagine how cheap these things cost in Russia, incredibly cheaper in average 3-4 times cheaper. From 1 to 2 thousand dollars only, while snowmobiles (brp , polaris, arctic cat, yamaha) are more expensive than in Canada and the USA.
Snowmachines have gone through the roof in price these days. I only buy used and try to do so in the spring when demand is low and so are prices. I wont be buying another one until after these ridiculous covid prices go down, though.
That thing needs a fan-cooled 340 Two stroke option It would rip with 30 HP that 4 stroke is like sounds like wet farts and is seems a little underpowered.
It looks like there is no chain case , just an open chain and sprockets as can be seen at 0:53. Seems like a lot of crud could get in there or a rock or stump could damage it easily. Any thoughts or experience with this type of setup?
So if I could design a Snow-E-Dog, which could also be called a Snow Bolt, or a Snikachu, at a low price point. Essentially a plug and play mod to the existing platform; could you guys make it happen?
Now i want to buy a sick sled with a blown engine and hack the front off and make this with sick tech under it slow but unstoppable tank ice fish hauler and tight woods ripper
I would imagine hard to get stuck, nothing to "hang up on" like on a snowmachine belly pan, and you can easily step off and take weight off. But I would imagine it is slow in deep poweder, it seems to have a tendency to plow infront of it quite well. Would almost like to have seen a more slim front that would deflect snow going over it to the sides.
PowerModz thx i know that there is nothing to get hang up on to but I was wondering if the track would spin or the engine would lack of power like when you had to step of but in deeper snow like I have In my area
Ape Havoc but you can put this in the trunk of your Outback and take off. Great for someone who doesn't have alot of storage at their place but still wants to spend time in the woods. I have a cabin that I need a snowmachines to access in the winter. I am seriously considering ditching my conventional machines for this. No more 140 mile trip with an old trailer over treacherous passes. Just throw it in my trunk and run. Would be great for me because I just need transpo. Not looking to rip things up (not that there is anything wrong with that). 😎
Most of the uses I can think of for this could be done by a 4 wheeler, so I'm not sure why you're comparing it to a sport snowmobile. The other reply has a good point though, it seems ease of hauling might be a major plus side.
My dad built a homade version of this and I can tell you these will go where a 4 wheeler wouldn't dream especially in the fall driving over floating bog
I don't get this thing. Get a snowmobile, and if a trailer is the issue like some have stated, the price for this thing will buy you a used 4x4 half ton truck. I just don't get it.
@@PowerModzOfficial Haha so true. I'm from north eastern Minnesota and we live fish and snowmobile regularly I've just never seen one of those bad boys before haha
meh - we've not been able to snowmobile so we have to do something - and this powermodz machine costs me a lot of money out of my pocket - so if you want me to keep making videos I need to make money.
Sorry bro, It's not just you... Everybody that I like watching on UA-cam are really into selling merch now... Usually what you do on UA-cam should be out of free time... I guess everybody is trying to make a living out of UA-cam now. I miss the Old Skool UA-camrs !
Dang that snow dog boogies for what it is. Can't get over the staring sound. Just like a good old craftsman lawn tractor. This thing is neat
This would be epic for getting to great locations for Backcountry skiing.
Love your vids !
Reminds me of my dad's 65 Foxtrac - not fast, but it was the machine that rescued the rest of us when we broke down.
I might sell the rev
"Never seen anybody sidehill a snowdog before!" Ive never even seen anybody ride a snowdog let alone sidehill em.😂😂
-- I love the Snowdog. It needs a bit more development though; such as a proper EFI motor and more modern track / boogie wheel tech to include modest suspension for smoother cornering.
And , now I need one
Traded the minivan strait up I get 70 miles to a gallon on this hog lol! now I want one
I'm amazed that you're able to stand up in the plastic sled. I would have thought it would have been very slick and hard to maintain your stance.
its tough is boon docking
Raise it, put a proper mat with 3" lugs on there, really go rippin!
Come down to West Yellowstone Montana. Amazing boondocking.
Do a mod snowdog and put a 800 2 stroke in it
hahaha!, wtf! I love that thing! I need one!
Cool rig
Is the sled slippery? If so I guess you could load it up with grip tape.
Love mine!
I remember having a ride on a bolens and a red diablo too
I have the same one and it it is a blast to ride it
Keep going snowdog
Louie ,pick on someone your own size
Actually looks like it does its job well
I’m thinking you drag race the elan and the dog
How much for that one used once you are all done beating it up? Would you deliver to Washington? 😋
Did Snowdog also make one of there with an electric motor? I recall seeing a youtube video on them. Or maybe it was a different company.
I think that's a different company.
Needs a jaws exhaust system
How does it do in 18-36" of powder?
Can you do a Yamaha ovation build
hey lou, hook some weight up to that thing and max it out... show me what it can do
Affordable beats walking 🚶♂️
I see it's chain drive... IDK. Usually snow machine do better with CVT.. It sounds under powered. I think it needs some refinement but could be useful for a winter trap line runner or late season hunting buggy around snow covered fields etc.
it's a 4 stroke so itll always sound underpowered...the 4 stroke guys will love hearing that lol. its chain drive but has a cvt...its a great machine and very tough but it's not meant to be s snowmobile.
👏👍
You just can't imagine how cheap these things cost in Russia, incredibly cheaper in average 3-4 times cheaper. From 1 to 2 thousand dollars only, while snowmobiles (brp , polaris, arctic cat, yamaha) are more expensive than in Canada and the USA.
Snowmachines have gone through the roof in price these days. I only buy used and try to do so in the spring when demand is low and so are prices. I wont be buying another one until after these ridiculous covid prices go down, though.
That thing needs a fan-cooled 340 Two stroke option It would rip with 30 HP
that 4 stroke is like sounds like wet farts and is seems a little underpowered.
Lol. Sounds like wet farts.
Already breaking it lol
How did you fix the loss of power? Was it a throttle cable issue or how do you adjust the belt?
Adjusted the belt
Can this do deep snow....I mean, deep snow.... lol like where the machine gets buried..
It looks like there is no chain case , just an open chain and sprockets as can be seen at 0:53. Seems like a lot of crud could get in there or a rock or stump could damage it easily. Any thoughts or experience with this type of setup?
its tight to the side not really an issue.
It’s no different that the open chain of a dirtbike or atv. They hold up just fine.
So if I could design a Snow-E-Dog, which could also be called a Snow Bolt, or a Snikachu, at a low price point. Essentially a plug and play mod to the existing platform; could you guys make it happen?
Im not sure id have time!
i baught a motorfist redline jacket any idea the shipping time?
from me?
Yep thats what I need. I'm in North west Ohio where do I go to get one, who do I call, what do I have to do? I need reverse.
Check snowdog.com for a USA dealer
@@PowerModzOfficial yeah! I found one about 60 miles away.
Can you plow a driveway with one of those?
I dont think it'd work that well.
Just ripping lads...
Now i want to buy a sick sled with a blown engine and hack the front off and make this with sick tech under it slow but unstoppable tank ice fish hauler and tight woods ripper
Turbo it.
When do we see a big bore conversion on this? 🤣🤣
Is it tough to stand on the sled?
no - ive down about 200kms in a weekend.
PowerModz you had to be sore, ha
How hard is it to get that stuck?
I would imagine hard to get stuck, nothing to "hang up on" like on a snowmachine belly pan, and you can easily step off and take weight off. But I would imagine it is slow in deep poweder, it seems to have a tendency to plow infront of it quite well. Would almost like to have seen a more slim front that would deflect snow going over it to the sides.
I would love to see a deep-snow capability test against the Elan 250 single.
I imagine you just step off and walk beside it. The whole unit is a track.
Video coming...I did some stuck testing.
PowerModz thx i know that there is nothing to get hang up on to but I was wondering if the track would spin or the engine would lack of power like when you had to step of but in deeper snow like I have In my area
the Russians in Siberia are everywhere! because the snowmobile is expensive and it will travel everywhere even in the spring)))
Needs more power.....like allot more. Pretty pricey too .
you wouldn't want more power - it would get stuck too fast.
How much does that cost
about 5k all in.
@@PowerModzOfficial wow. Here in russia it is 1200usd
Try to sidehill with that thing!
i paid for WinRar o
what a waste of money. $5k for that ? I think not
Y Z I think it’s unique, i like it
How fun?
tons of fun!
Those snow dogs are expensive as @#$%
Not really - try buying a new sled
No crap
I don't understand these things. why would you 5k for a snow dog? for 5k you can get a mint 800 rev with low km.
Ape Havoc but you can put this in the trunk of your Outback and take off. Great for someone who doesn't have alot of storage at their place but still wants to spend time in the woods.
I have a cabin that I need a snowmachines to access in the winter. I am seriously considering ditching my conventional machines for this. No more 140 mile trip with an old trailer over treacherous passes. Just throw it in my trunk and run. Would be great for me because I just need transpo. Not looking to rip things up (not that there is anything wrong with that). 😎
Most of the uses I can think of for this could be done by a 4 wheeler, so I'm not sure why you're comparing it to a sport snowmobile. The other reply has a good point though, it seems ease of hauling might be a major plus side.
My dad built a homade version of this and I can tell you these will go where a 4 wheeler wouldn't dream especially in the fall driving over floating bog
I don't get this thing. Get a snowmobile, and if a trailer is the issue like some have stated, the price for this thing will buy you a used 4x4 half ton truck. I just don't get it.
Ape Havoc
This is designed for purpose. Sure in this video he's rippin like its a sled, you can't nimble a 800 like this!! Not a chance
when boggy series continues ? this channel has become more testing weird gadgets and things , i like the old way better. thinking unsubscribing ;/
Lol wtf am I watching
Pure fun.
@@PowerModzOfficial Haha so true. I'm from north eastern Minnesota and we live fish and snowmobile regularly I've just never seen one of those bad boys before haha
I really use to love Powermods but now it's all about marketing and selling stuff... =(
meh - we've not been able to snowmobile so we have to do something - and this powermodz machine costs me a lot of money out of my pocket - so if you want me to keep making videos I need to make money.
Sorry bro, It's not just you... Everybody that I like watching on UA-cam are really into selling merch now... Usually what you do on UA-cam should be out of free time... I guess everybody is trying to make a living out of UA-cam now. I miss the Old Skool UA-camrs !
Your accent is weird.
I dont have an accent...you have an accent...