Transforming MAT ARMSTRONG'S BMW E24 That We Restored! - Body Kit Installation & Big Plans
Вставка
- Опубліковано 24 сер 2024
- Some people told us to scrap this car, but what a journey we have been on with restoring @MatArmstrongbmx Classic BMW E24 635 CSI. We have tackled a crazy amount of rust on this car in the previous episodes and we have powder coated the entire car.
Now in pure Mat Armstrong fashion, we are going to highly modify the Classic BMW with a crazy body kit! We also reveal some big plans for this car and you get to have your say! Get involved and leave your comments below, and don't forget to hit that like and subscribe button!
Check out our other episodes on this car in this playlist:
• Mat Armstrong's E24 63...
Check out Mats channel here:
/ @matarmstrongbmx
Sheet steel or this bodykit? Don't forget to hit that like and subscribe button!
My question would be, who's paying for labour and materials to make a steel kit.
Edit wouldn't touch the doors
Stick with the fibreglass.
Cheaper to replace when he stacks it lol.
Serious question though. With overfender type kits won't this trap moisture and rust out the panel underneath which seems counter productive after spending so much time and money on a restoration.
STEEEEEEEEELLLLLL
Is that even a real question ? With your skills and for the ultimate end result it has to be STEEL
Steel
Definitely Sheet Steel is the way to go, would be a crime to your channel and craftsmanship to do what every other channel would do and bolt the fiberglass on.
Agreed!
Word
Word up
Retropower 2.0
100% you are the guys that can pop this of
In all honesty, dont go over the top like everyone else has, making the full custom with your finest sheet steel but keeping the cars beautiful lines just exaggerated to the extreme, remembering that the CSi is one of the finest BMW shapes ever.
Great work as usual.
Sounds like a plan
Fabrication of the bodykit would be the crowning glory the kit isn't quite wide enough for me 😁👌
These cars are so beautiful. A body kit would ruin it but if you have to, sheet steel would be the crowning achievement of your metal skills. Keep up the great work. Love your videos.
These cars have beautiful lines!
In my humble opinion, all they need is lowering and a set of bbs rims!
Keep up the great work YCR!!
Thanks, will do!
Agreed! subtlety imo works (think the rear wing looks ugly/overkill - but not my car so...)
Build the bodykit of metal, but don’t do anything to the doors
Thanks for the comment :) I was undecided with the doors in all honesty
please not the doors.
Agree. Sheet steel and don't mess with the doors. Nice job so far.
Agree with sheet steel and untouched doors. Will be good to watch. really nice job so far.
I agree with this 100%
Keep it stock, such a beautiful car 'as is'
It really is!
Glad someone else feels as I do.
Agreed.
That said, could some sort of fibreglass kit could be fitted in a way that would be relatively easily removable at some future point?
Keep in mind it was priced and sold as a cheap donor car, NOBODY else wanted it restored for the price it costs.
At that point, purists who could have saved it and didnt have literally foregone all right they had for this car to be kept stock.
@@ToreDL87 What an odd comment. So because others didn't have the cash available that MA has from his YT channel they are at fault somehow? And what 'rights' does anyone have if they don't own the car.
Yes we all know MA likes to modify cars (and I am a subscriber) and fair play to him but THIS car has been rebuilt to standard specification. What we see here is a perfect example of a factory 635 bodyshell. So the judgment has to be on the car as it is now not what it was months ago.
All custom!!
Mat should mention you more, you deserve the views!!
I would keep it original especially the work you guys did to it to get it to that condition is a merit to your workmanship
Same here, keep it original. Less is more imho.
Yeah, I'm a purest, too. A gentleman's car, and now you want to add all that kids stuff?
Fr
Restomodding it would mean cutting up the original quarter panels you just restored. That's a terrible idea.
I think it's ridiculous, the way this project evolves. First putting in all that effort to get the car in perfect original condition and then putting a vulgair body kit on it, something that 19-year-old boys get a kick out of because they want to drive a so-called 'thick' car... I would never do this as a professional, in fact I would be ashamed if I had to make this. I would refuse to do it if you have any honor.
I vote for full custom using the sheet steel.
Love it
Deffs steal
Like icing a Rolex, it would look crass. It will be more valuable as a standard coupe. As the years go by you will appreciate the standard shape.4:
Killing it 💯keeping the old school cars alive 👌🏼
I have to say Matt you like one of the most positive people I have seen on UA-cam so far your personality it's very genuine look forward to your shows brother.
I cannot believe you going to cut that beautiful work you did that body was perfect
Keep it real .. keep it steel!
YESS!!
The fact that your smile was everywhere, the fact that there was a twinkle in your eyes, the fact that you almost pitched a higher voice, all when you started explaining the sheet metal idea.. I think you gave the answer yourself..
Build it for us!
Only 1 right route to take and that is to make this car truely a one of a kind! Full custom body kit, handcrafted by YCR!!! LOVE FROM NL ❤
Such a beautifully restored example, to be ruined by some wonky kit? Doesn't look good at all... of course as Matt says, his car his choice, get your own and decide for yourself, now a full custom built for that car kit... now we talking! Too much effort has already been put into this car. Of course you boys gotta look after yourselves and the finances of the business so taking your time with this is not just expected, but much appreciated!
Agree mate. It bshould be restored the way it was from the factory back in the day
Sounds good to me :) one of a kind beast!
I agree
Exactly standard this thing is so beautiful
Too much work has gone into to this to ruin it with body kits which will look garbage in years to come. Matt Armstrong has done zero work on this car, he should let the guys restoring it make the decision. Has Matt even mentioned this car on his main channel in the last year.
Make it your own - full steel body kit would further show your expertise and workmanship and give the car what it deserves
It really would! Thanks so much!
Do body-kit from steel it will be one of the kind. And i think u guys are proper man to this type of madness
keeping it original, you look original driving it!
I have seen the entire series of rebuilding the 24. I fully agree that this car and your work deserves the extra step. Go for steel!
Keep this one STOCK with some bbs’s on it…get another one for the sheet steel body kit 🤝🏼
Man he’s putting a lot of effort just to show us. Well done you. Love
Another vote for the steel. I think bolt on kits look cheap and with your skills it would be a missed opportunity for Mat.
Sheet steel!! Beastmode!
YESSS!!!!!!!!!
Being that YCR does extremely good fabrication work, you have Mat's approval to challenge yourselves and it will definitely make the BMW unique (and not rely on a prefab kit) ..... I vote you go ahead and do the aero out of steel. As for the door aero, it would help to see a mock up dome in card board, or whatever you choose, to get the full visual on it. Mat has the pockets and you have the talent and skills. Thanks for allowing us the opportunity to vote on such a big decision.
Definitely full custom! Watching you guys work your magic is truly inspirational. The end result will be a sight to behold!!
I'd definitely argue for going the distance with sheet steel etc.
1) it'll probably look better as it won't flex
2) it'll be an even bigger showcase of what you guys can do
3) We'll all get more awesome craftsmanship to nerd out over
3 awesome points there! I think steel is the way forward :)
YCR Steel job, in my humble opinion.
If we must see an E24 as beautiful as this one being modified then fibreglass would be a complete abomination!
Love it! Thanks so much
Love Matt’s projects , but I think this car should be stock and restored back to its original design. It’s such a beautiful car design .
Full beast mode all the way 🎉🎉🎉🎉🎉🎉
sheet steel beast mode. GRP is for squits. The body kit you stuck on turns the car into a BMW CSL ‘Batmobile’ replica. Make it yours!
Roger that!
Quick tangent away from the great debate... My dude that intro! The whole video! Feels like a massive step up. Editing, filming, voice over too, next level man
The Australian JPS Group C car that this bodykit seems based on was never as beautiful as the original design...
Stunning car, keep it beautiful...
Love your work, lads!
You have already done more than what any of us ever imagined. Your talent is just so incredible!
Please keep the car original without any body kits! Even though we know you def can make a banger steel one! I was hoping Mat would do the mods later…
It has to be sheet steel. Next level stuff! High end UA-cam channel. Can't wait
Great vid, love your work. You always have great tunes as well.
First of all, you’ve done a fantastic job restoring such an iconic car thus far. You’re at a crossroad that leads to greatness either way.. why choose? F-it, do both! Restore it to its dope original lines and fabricate a metal removable body kit! Matt and all the subscribers will be thrilled and tickled!
Hey buddy Mr. Captain yorkshire Ryan good to see you I just got home from visiting my brother and im glad my internet is working its slow but working. That chassis rail you made for it belongs in a museum. I will never forget it you are the best 👌 👍.
Hi David, hope you are well, Thanks so much for the comments and the continued support! Hope your brother is also good. And yes! I really enjoyed making that chassis rail and I made sure to include it in this video :)
@@yorkshirecarrestoration my brother is doing good so far I just hope he doesn't have any more problems with his heart..yeah buddy I love that chassis rail bada Bing bada boom ❤️ hope you all have a wonderful blessed week ahead and a safe one. Take care buddy.
Sheet steel - that’s what you’re all about and the result will be epic with the level of craftsmanship you guys have. 👍🏻
I hope Mat gives you the car when it’s finished as I know he isn’t paying you. The amount of work you have done on this car is insane. You are a master craftsman 👍
The way Phil at Driftworks has had the bodywork done to both his e30 m3 and Murcielago are in my opinion the best way to go, widening them by quite a bit yet keeping them looking like they were made that way. The guy (maybe Ricky?!) who did the bodywork on them is quite frankly a flippin master of his craft and has made the cars look astounding. Also I think of steel and then i think of weight, If you decide to go large would ally not be a better route? I seriously adore this project, and with all the time and effort gone in, 100% make sure you get this bit right. kudos to you sir.
A body kit on the E24 ...... Has someone lost their God damn mind ???
haha
100% agree
STEEL, STEEL, STEEL, STEEL. It’s a must, but don’t over egg the final design
I appreciate where Matt is going with this build. That body kit will certainly need lots of work to make it look like it is not just an add on. I think possibly leave the boot wing and bumpers as fibreglass but definitely make the rear 1/4's and guards out of steel. If you do make new steel panels also try and incorporate the OE fuel door and pocket into the new flare and extend the fuel filler neck. Don't touch the doors apart from deleting the side mould holes. Maybe also consider doing something different with the rear view mirrors to match the new aggressive look.
Your work is absolute quality, don’t spoil it by fitting a fibre glass kit, keep it bespoke, keep it steel 👌
Steel body kit for me. No question. Hoping you go that way, it will make a great series even better to see that being made.
It really would!
Nope, bodykits not for me.....ruined a great looking car.😢
Its not for everyone I guess. Thanks for watching though!
You are an Artist and all your creativity should be given free rein. Beastmode gets my vote and I believe we will all be stunned by the finished result.
Love the BMW's body kit, but think you should go full beast mode. Would like to see content on your daily driver too.
Full custom sheet metal brother ♥️
Love it
Got proper group 2 racing vibes 😍
Oh yeah!
I was looking for this comment! 👌🤩
Sheet steel for sure as you have proved you are more than capable!
It would be sacrilege slapping that fiberglass kit on that beautiful car!
Make you own body kit you obviously have the talent to do it justice
Thank you so much!!!
Make your own steel wings perhaps using BMW 3.0 csl group 4 race cars for inspiration.
Very good inspiration!
I mean that is a silly question!!! Obviously full on custom sheet steel to give it that next level custom 1of 1 look and show off the pure craftsmanship of Yorkshire Car Restoration. Plus we can all tell as soon as Matt okayed it you definitely wanted to do custom!!
E24 HOONIGAN style would be awesome. What legends you are, thank you ... Steel!
What about the Mazda Cosmo? I miss that.
To make a return soon!
Beast mode obviously
Love it!
Sheet steel 100%, the cars a work of art, show the world what you can do mate 💪
Custom sheet steel thats Matt to a tee 👏👏
1000% make your own body kit
Thanks so much!
@@yorkshirecarrestorationyour welcome I love watching the craftsmanship and skills you have, any opportunity to see more of your work can only be a good thing
full custom all the way ! and a savage m3 engine
Love it!
You are the masters of fabrication, plus more content! Easy decision. Mat would have a unique car and you would have one hell of an advert! Do it!
I vote for sheet steel for sure. The e24 is such a beautiful car, I think it would be best to just exaggerate the body lines a bit wider, not too much. Keep the doors original and make it tastefully wider so you can fit some nice wheels.
Sheet steel gets my vote but this tantric "Mat Armstrong" build series needs to come to a head.
Thank you! And we worked on this car one day per week and showed more of a how to on restoring the car, this is why it has taken so long
Ruined it
Its his car that he wants to be unique
Fabricate your own, also get mat to make some one off wheels with his logo in and 100% get the GTR on the Chanel!! Full custom “BEAST MODE” 🙌🏻 awesome video 🫱🏻🫲🏼
Dude, you need to give it a metal body kit because your craftsmanship is the nuts
I think its a shame this beauty isn´t being restored to a M6 or a Aplina!
Oh dear, another one to be rewined. Although it was predictable considering the owner.
Mat loves to modify his cars, i guess there are a lot of them out there which are original, so this one will look different
@@yorkshirecarrestorationmodified one of his with a telegraph pole 😊😂😂
Taking BMW's prettiest ever car and spoiling the lines. After all that work making it solid, it will look a total dog, IMHO.
Its Mats car so he calls the shots.
Sheet metal all the way. You’ve done a magic job so far. You’d be declared a genius if you can mock that body kit and give it a bit of flare!!! Talented lad you are pal!
You should definitely make it out of sheet steel. If you want to go wild, you could make the sheet steel "body kit" inspired by a 1978 BMW 320 Turbo Group 5 race car.
How to ruin a beautiful car in one short video.........
I suppose the body kit is not for everyone
Hideous kit.
Its not for everyone
Full custom sheet metal! Make a series of it!
Bigger and Wider BBS wheels on that BMW will look SOOOOOOOOOOOOOOOOOOOOOO good as the finishing touch!!
I will get a lot of pain for this but please lose that horible body kit
Its not for everyone I guess, but Mat wants it
@@yorkshirecarrestoration you are right it is his choice .
That E24 is going to look insane loving the lines ❤✊🇬🇧✊.
How can you make a beautiful design better looking? I'd go for the handmade sheet steel customisation, BUT for what it's worth, I'd say don't go OTT with the doors, fancy fins, fake air intakes, go faster mouldings and cowlings, which will turn a classic into custard, a restoration into a pastiche, a beautiful design into a boy-racer buggy. Great to see you back, looking forward to the next video! Please please keep it simple!! 😂😊🎉😊😂
this looks incredible , doesn’t even look like the same old ragged out dumpster on wheels. Nice workn
full steel body kit ,the car will look absolutely amazing either way , but you have the skills and talent to make history with this one ,
please keep the vids coming mate.
I can't wait to see this finished the quicker process the better lol 🎉
Do do any sort of justice to the incredible work you've done on this BMW restoration so far, it HAS to be metal, IMHO.
Mind you, you'll have to keep a watch on the additional weight this may generate.
Oh, and leave the doors as they are!
you both come a long way since this series started. what a beautiful piece of art! I wonder how many hundreds of hours of labour went into this. Putting a bodykit on a rather used car is one thing, but like "destroying" the work you did until having a 6 series in such a mint condition makes my heart bleed.
Turn it into a Group A tourer replica for the road, and bin the plastic add ons
You can just feel Matt watching 😂😂👌🏻👌🏻👌🏻
Whichever is the quickest, feels like this build has taken an age already and just want to see it finished now. 🙂
That kit looks insane! In very good way. Absolutely stunning!
Full custom kit would be looking crazy beautuful. Mat’s car should look grazy!
Sheet steel is the way to go with this 💯
It’s looking awesome already, well done 👏
Something based on the 3.0 CSL Batmobile from the European touring cars of the 70's would look awesome.
Defos go with custom doors, not alot of these old cars have these designs and this would make it one of kind for sir mat Armstrong best car content creator out there, and yous guys will smash this out park, getting more people want there old cars just like this
Custom is the way to go. Its a no brainer. ❤
As this car is one of my favs I've been curious about it's progress. Thanks for everything.
Going to look sick when it's done , steel work you've done so far is unreal .... proper restored 👏
There are certain cars you don’t modify and the legendary 6 series is one of them. A full restoration along with a period correct BBS wheels would look so much better.
Sheet steel Al the way!!! You have done such an amazing job to date and the craftsmanship has been second to none! Fibreglass just would not reflect that beautiful work!