Damn,i was so inspired this morning to do this myself come spring. After watching this,im gonna go ahead n get a loan and cough up the 15-20 grand to get this done 😔
So how did you clean the pool water after you were done? Seems like placing a liner on top of the water would have been easier. Does this system allow for replacement of the pool liner?
My fiber glass pool has hallow spots underneath - (we have not poured concrete yet ) is this normal ? Or should of kid it be solid with the dirt and rocks underneath ??
You made it look easy nice forms saves time although i dont think they are reuseable cost of labor to clean them must be pretty close to just buying new ones plus the owner is paying. Spraying disel on them should help keepem clean i would spray before installing to avoid excess disel in water area
El borde de la piscina esta bueno pero ensuciaron el agua yo lo ago sin ensuciar el agua y si ce puede y con formaleya mas economica Pero cada quien conlo suyo lo res peto pero esta buenisimo
I had a 10x24 salt vinyl water pool installed last summer. We’re trying to DIY coping and small patio around the pool. Any tips or recommendation on coping? I’m a bit concern about safety along the edges of the coping. Are there soft coping? Or in general the only options is pavers or concrete coping?
Whatever degree cut you need, you can make it with circular saw. That would only be square pools though. Most pool these days are radius somewhere or another. Most cantilever forms I've ever done either snaps together at the butts, or stick together, then you apply wite to hold in place, then duct tape to seal your butt lines as one peice. Just trying help ya, not trying act like I know it all.
he made a mess in that pool that is why I blue tape 1" pink foam around the perimeter of the pool then toss a 2mill plastic over the entire pool and tape it down to the foam. a little extra set up time saves you on clean up and never worry about the concrete burning the liner
Mine is waiting for the concrete to get poured next week and as I'm watching this video I'm thinking "damn,they're gonna ruin the water " . I hope they use your set up technique
Where can I get this products? I'm getting ready to start a new pool this set up looks awesome can you provide the contact information so I can contact yall thanks
Products can be purchased right from our website- www.concretecountertopsolutions.com/category/poolform-products For any questions, please contact us here - www.concretecountertopsolutions.com/contact
Right bro... i was clamping my jaw as he was throwing the release in the pool, if you look closely a little of it hits the stamp. Lol looks nicw all in all but my company isnt into hiring a pool cleaner afterwards to finish a job.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
That really is Al !! Say hello to his little friend!
Damn,i was so inspired this morning to do this myself come spring. After watching this,im gonna go ahead n get a loan and cough up the 15-20 grand to get this done 😔
This is a very helpful video. I'm sorry it makes some people express frustrations.
So how did you clean the pool water after you were done? Seems like placing a liner on top of the water would have been easier. Does this system allow for replacement of the pool liner?
My fiber glass pool has hallow spots underneath - (we have not poured concrete yet ) is this normal ? Or should of kid it be solid with the dirt and rocks underneath ??
So this is what Al Pacino is doing today!
Is this available in minnesota?
You made it look easy nice forms saves time although i dont think they are reuseable cost of labor to clean them must be pretty close to just buying new ones plus the owner is paying. Spraying disel on them should help keepem clean i would spray before installing to avoid excess disel in water area
Minute 12:38 the concrete forms expand!! Minute 12:52 guy fixes it?
El borde de la piscina esta bueno pero ensuciaron el agua yo lo ago sin ensuciar el agua y si ce puede y con formaleya mas economica Pero cada quien conlo suyo lo res peto pero esta buenisimo
+Alexander Arana Se puede limpiar todo eso después.
I had a 10x24 salt vinyl water pool installed last summer. We’re trying to DIY coping and small patio around the pool. Any tips or recommendation on coping? I’m a bit concern about safety along the edges of the coping. Are there soft coping? Or in general the only options is pavers or concrete coping?
where do you get the vinyl rubber tape? for the coping
Where do you get the accessories?
How do you address inside and inside 90° or 45° corners? If you have to miter cut the form liner how do you cut it?
Whatever degree cut you need, you can make it with circular saw. That would only be square pools though. Most pool these days are radius somewhere or another. Most cantilever forms I've ever done either snaps together at the butts, or stick together, then you apply wite to hold in place, then duct tape to seal your butt lines as one peice. Just trying help ya, not trying act like I know it all.
he made a mess in that pool that is why I blue tape 1" pink foam around the perimeter of the pool then toss a 2mill plastic over the entire pool and tape it down to the foam. a little extra set up time saves you on clean up and never worry about the concrete burning the liner
Mine is waiting for the concrete to get poured next week and as I'm watching this video I'm thinking "damn,they're gonna ruin the water " . I hope they use your set up technique
@@hankchinx1748 Did they?
Can't find anyone down in Fort Lauderdale that knows how to work pool cantilevers.
Do the receiver tracks stay in after pouring coping on concrete pools?
Great System!!
What company makes those flexible forms?
Concrete Countertop Solutions - www.concretecountertopsolutions.com/category/poolform-products
@@storeinformation1494 Thank you very much
What type of cement is that can I purchase a bag from Home Depot ?
rough as guts , all the concrete and cement dust that went into pool
what does it matter? its easily cleaned, and when its a retrofit type of job, this shit happens....dont be a wanker baby
@@1gbayfisher You mean cleaned by getting sucked into all the pool equipment only to be destroyed a month later? No thanks
what happens when small cracks form in coping and rebar inside rusts? good luck with that.
Where can I get this products? I'm getting ready to start a new pool this set up looks awesome can you provide the contact information so I can contact yall thanks
Products can be purchased right from our website- www.concretecountertopsolutions.com/category/poolform-products
For any questions, please contact us here - www.concretecountertopsolutions.com/contact
Last but not least, drain the pool and clean it! Wow... that concrete contractor was hella sloppy and lazy!!
Ouch RA all up in the pool. Painters plastic floats.
Right bro... i was clamping my jaw as he was throwing the release in the pool, if you look closely a little of it hits the stamp. Lol looks nicw all in all but my company isnt into hiring a pool cleaner afterwards to finish a job.
Z Counterform can you use it on liner pool before the liner is installed
Woodglut plans are amazing!
Great product. Find new concrete guys. What a sloppy pour