Fixing Dash Indicator Light Yamaha V Star

Eh, Guys! Wuzzup! Play on HD! Sharing this DIY video on how to fix dash indicator light Hyperflash of My Yamaha V Star 1100. I hope this video helps. And feel free to leave a COMMENT, Hit LIKE, SHARE and don't forget to SUBSCRIBE! Soon I'll BeRideBack!
And also
Please VISIT and LIKE my Facebook Page - BerideBack BRB
Reach me at [e-mail]
Diode Kit - amzn.to/42EhndU
Hyperflash Relay - amzn.to/3HNPaZC
Led Driving Light - amzn.to/3LBQsZ5
Relocation Bracket - amzn.to/3VeUOK5
Rear Turn signals - amzn.to/3AorMhc
Ape Bobber Handlebar - amzn.to/40tQKHD
Ape Bobber Hanger - amzn.to/3zmiUZ4
ETC Extention Plug - amzn.to/42W0ZpK
Dent Remover Tools - amzn.to/3ZYDo5L
Dupli color
Prep Spray - amzn.to/3mOzKNg
High-Performance Wheel Paint - amzn.to/3Jm3iJQ
SprayMax 2K
Epoxy Primer - amzn.to/3lbObKQ
Top Clearcoat - amzn.to/3Jm3iJQ
Stem Bearing - amzn.to/3YsJb26
Waterproof Grease - amzn.to/3ylaRLr
Stem bearing Tools - amzn.to/3JkWT1x Stem Tools - amzn.to/3l0uxkH
Headset Cup Tools - amzn.to/41PofFn
Liqui Moly Engine Flush - amzn.to/3IwpCQo
Extention Bar - amzn.to/3Z5xQ9a
Spark Plug Socket - amzn.to/3KEHpaW
Join Swivel Socket - amzn.to/41qVz5j
PeakTow Motorcycle Jack - amzn.to/3S8VSh3
Cameras
Insta360 - Can - amzn.to/3o1pEXj
- US - amzn.to/3rnkwPD
Gopro H7 - Can - amzn.to/3cTYiw9
US - amzn.to/3DXbU5z
Microphone - amzn.to/3yGBAl5 - Can
- amzn.to/3IXu6yP - US
- amzn.to/315STiL - Can
- amzn.to/3D33yIr - US
Mounts - Can - amzn.to/3xx30Js - Clamp
-amzn.to/32Aj5CN - Smallrig Articulating arm
US - amzn.to/3FTdu99 - Clamp
- amzn.to/3cXzAuF - Smallrig Articulating arm
Motorcycle Cover - amzn.to/2Zy33sb - Can
- amzn.to/3DXeU1P - US
Again thank you for your time watching this video folks!

[@AustinHawkes-wo4fu]

I'm having issues with my set up. My front signals are all correct. I installed the led flasher relay (like your previous video) I removed all my tail lights my V-Star and installed two 3-1 (run,stop,signal) to the rear. Wired everything up correctly to the factory tail light harness. All lights come on, brake lights work upon using the brake levers. But when I go to signal they all light up solid (front and back) with no flashing. Any ideas?

[@davidlynnprepperprincipal3540]

My father, who has been gone for going on 50 years told me stories when I was a boy about having a Harley in his younger days he kept running with spit and bailing wire! Nice upgrade. Like! Stay connected! Blessings 🙏🏼

[@BeRideBack]

Thank you sir, you as well be safe always

[@Viper6-MotoVlogger]

Nice job fixing the issue and taking down those indicators bro 😁. Be safe out there 👍

[@BeRideBack]

Thanks bro finally everything is working know😁, be safe always

[@Triple4Motovlog]

Thanks for sharing kabayan. Makikidaan muli

[@BeRideBack]

Thank you too kabayan, be safe lage

[@iamkingrichard2032]

Question bro: What if I am going to change the bulb to LED on the dash and my flasher lights and add a new flasher relay, would I still add a diode like what you are doing on the dash? Thanks.

[@BeRideBack]

Hi bro, sorry for the super late response. Yes, you still need to get a diode on the dash, I tried not to put it at first, but the dash lights flashing so fast. I hope this answers your questions, happy new year and ride safe always!

[@Fabianodamt]

Muito boa sua explicação

[@BeRideBack]

Thank you, my friend be safe always

[@AustinHawkes-wo4fu]

Question. So do I need to do this and a flasher relay or can I just do one or the other??
@BeRideBack

[@BeRideBack]

hello my friend sorry for the late response, you need to do both, because the dash light turn signal indicator is not led, hope this helps, ride safe always.

[@AustinHawkes-wo4fu]

@@BeRideBack thanks for the reply! Take care 🤘🏼

[@AustinHawkes-wo4fu]

Question. So do I need to do this and a flasher relay or can I just do one or the other??

[@AustinHawkes-wo4fu]

Did you need to add resistors for the rear tail lights?