Lots of videos like this. What truly drives me crazy is when you are in the middle of a repair and need to see a video of how to complete what you are doing and some damn fool wants to show you himself playing with his new kitten when the video is supposed to be about removing a frozen counter shaft nut.
Tip….Grind the tops of the pins down to the surface of the chain side plate with a grinder before using the chain breaker. It’s then much easier to push them through the side plate. Also less chance of damaging the chain breaker.
@@BorderPaps I guess center to slightly forward, this will give you adjustment in both ways, Not sure regarding chain stretch though as further back gives you less adjustment as the chain stretches.
sir. my xr 125 yr model 2013 i think has a problem, early morning when i start the engine it feels good but when the engine gets hotter it started to cut the force of the engine when i rev it. what can i do for that please help me anyone knows the solution please help me.
Nobody has a chain tool hate these tutorials they're always using these goofy tools that none of the general public wants to buy when you just take a grinder and grind the pins off the plate and then punch the pin thru
Most of these are poorly worded comments. That are mean/rude some even sarcastic. They will stop making these videos if people keep this attitude up...
That’s clips no good. You know you had mentioned that needs to be in a certain direction What if you roll your bike backwards out of the trailer or on the driveway.
I’m glad y’all fast forwarded through the important parts 👍
Right. 😂
Awesome video! Been some years since I changed a chain. This helped refresh and prevent me from miscutting! Thank you!
Did a whole video on how to cut the chain and skipped the part where he cut the chain good job guys
Brad Coumbs he didn’t have to cut it
@@chriswebb383 It was in the title !!!!!!!!
He did it with the tool
Hats off, gentlemen.
You succeeded at nothing. ⭐️
Lots of videos like this.
What truly drives me crazy is when you are in the middle of a repair and need to see a video of how to complete what you are doing and some damn fool wants to show you himself playing with his new kitten when the video is supposed to be about removing a frozen counter shaft nut.
Yeah! Transworld is finally back!
tried taking chain off, couldnt get link off. Out of frustration i got the bolt cutters and just cut the old chain in half, frustration gone.
That’s how I did lmao 😂
You have got to be kidding me. You fast forwarded through the hard part. JFC
Thanks for the video.
Awesome vid and edits and filming and bike
Do how-to once a week ! it will help me alot. Can next one be about removing/cleaning carb ?
Nice camera work fellas👍
Tip….Grind the tops of the pins down to the surface of the chain side plate with a grinder before using the chain breaker. It’s then much easier to push them through the side plate. Also less chance of damaging the chain breaker.
Can you guys do a video where we look inside a mechanics toolbox and what they use/how they use the tools?
This dude always knows his shit
Lol you do know 90% of the people watching this don’t have a chain cutter
In the actual cutting of the chain , the video was so fast that it was not clear how it was done.
If l put one teeth more on rear sprocket did l must buy and a longer chain ?
How do you know you chain is toast... my markers are right on the last markers is it Tim to change the chain or am I good for now ?
So where do you set wheel before you decide where to cut chain ?? All the way forward...back...centered ?
I know. He said set it where you want it. Where do you want it?
@@BorderPaps I guess center to slightly forward, this will give you adjustment in both ways, Not sure regarding chain stretch though as further back gives you less adjustment as the chain stretches.
i changed the rear sprocket from 49 to 43 how many links do i take off?
Kevin Stearns you will know adjust the chain tension before you break the chain apart bro then measure just like dude did in the video
Will 520 120 links fits 520 114 links kawasaki 650
Badass
Wish I watched this before attempting to do it myself lol oh well to princess auto I go
you forward gold of the video.how can we learn it anyway.
Is it safe to run 2 master links?
You'd need Master and Commander links.
How do you know what type of chain is on bike ? 420 or 428
Usually a 428
It’s a 520
sir. my xr 125 yr model 2013 i think has a problem, early morning when i start the engine it feels good but when the engine gets hotter it started to cut the force of the engine when i rev it. what can i do for that please help me anyone knows the solution please help me.
Elvie Vargas Happened to me this morning. Full gas? Choke im correct place? You probably flooded it. Try putting it on reserve.
Sounds like it's running too lean.
I resorted to bolt cutters because I’m a dumbass and don’t have chain cutters.
2ndveiwer 🙌🏼
Noice
He looks like Ubbe from vikings lol
i think you forgot to put the O rings on.
thats a non o ring chain
Hotel lobby jazz music............
Cameraman fired
Only came for master clip install because it's a pain and I couldn't see anything he did, good job 😂👎
The guy filming should be fired
Lol with the special tool you dont have to show this video men… we trying to figure out how to with our tool we got home!
Nobody has a chain tool hate these tutorials they're always using these goofy tools that none of the general public wants to buy when you just take a grinder and grind the pins off the plate and then punch the pin thru
motoXkidd vlogs A chain breaker is $25 or less. Everyone should own one.
no there is another way to remove links. prick punch center punch. grinder.
motoXkidd vlogs you dont need 1 to do this if you have an hammer and a flat head screw driver you can break the chain link(s) out
You didn't talk about chain identification; as if all chains are the same.
Most of these are poorly worded comments.
That are mean/rude some even sarcastic.
They will stop making these videos if people keep this attitude up...
Stop being a goody two shoes
That’s clips no good. You know you had mentioned that needs to be in a certain direction What if you roll your bike backwards out of the trailer or on the driveway.
dude cants see shit what u did right there
One dislike from me 😡
Lol...the important parts either fast forwarded or blocked by his hands