Rod Knock Or Valve Lash? Turbo Del Sol!
Вставка
- Опубліковано 23 лют 2020
- Check out my website
www.huntertuned.com/
Become A Patreon
/ huntertuned
Follow me on social media
HunterTuned UA-cam Facebook Group
/ huntertunedyoutube
Instagram : / huntertuned1
Snapchat : HunterTuned
Email : HunterTuned@gmail.com - Авто та транспорт
Sound and picture is great. Perfect FOV. Keep this set up for sure.
Nice, i had problems setting the idle on my d16y8 with the idle screw, finally this vid helps a million that the stop screw is what that really needs adjustment to set it right, thanks a million times. Most underrated creator, you deserve a million subscriber 😎
The world needs more people like you man, great job and awesome video!
congrats on the new car man cant wait to see what you do to it!!!
Camera loos great and glad you finally got a K bro. Can’t wait to see what you do with it cause you know you can’t leave shit alone.
#hunterthe🐐
Your idle trick helped me get my car idle a lot better when the rpm in dropping to idle
Good work Hunt always enjoy the vids my man.
I got a B16a2 in my hatch! Thanks for tips and knowledge. The new camera is MINT!
GoPro 7 is awesome! Great content Brother. I'm glad I'm not the only LS guy that loves Honda's
Dunno if someone mentioned it yet but these cars are known to have those issues in rear end. My car is same thing. Hit a puddle and rear end jumps out. My cars almost dead so not bothering fixing it but would like to know what you had to do. Great vid.
Footage looks amazing!
Glad The Si Is Treating You Good. It Was A Good Daily To Me💯
Also Can’t wait for content on the Si!
Could have pulled a plug wire one by one and listened for the "knocking" to change pitch or stop to see if it was bottom and and which one. But good call on the valve lash. Pre roller rocker arm Hondas can get noisy.
I had a similar issue. Beat the piss out my LS for like 2 hours, didn't realize the rev limit was at 8k and loosened almost every valve. Sounded just like I spun several bearings. Good times 🤣
Howd u fix this bro
@@eduardozavala91 setting the valve lash.
Ok bro my b16 doing the same shit
Could this cause the car to sound horrible, like metal on metal, to the point the idle will stumble? My nephew had a 97 hatch, and let a friend drive it and it bounced off the rev limiter a few times and developed a nasty knock, so he sold it to me for stupid cheap, and I'm working on it this weekend to try and get it back on the road..
@@jeffkarr461 wouldn't hurt to check the valve lash first. I swapped the motor out first then did an inspection and wanted to slap myself cause it was a healthy ass engine.
Dude a duel huntertuned injector setup would be sick to see! I think it would be a fun intresting project to do. Way to think outside the box dude!
I daily an 08 si too, I’m also curious about HTS on that gen civic hopefully u can get vids it on that since u got one now!
Bro this was hella good information thank you
Another good video buddy and keep up the good work and hope all is well with you and your family and keep living life to the fullest and Send it
On the throttle body thing you took apart does coolant have to flow thru it? I'm trying to fix my high idle issue and noticed mine was just capped off. Going to adjust it all the way down like you did and also about how many threads should I set the idle screw to? Less threads less idle I suppose. Thanks for the help
11:40 - how to set idle
for anyone interested, and for my future use ✌️
What fuel pressure do you recommend to run ?
I have the same issue, I'm gonna see tomorrow, to me it sounds like valves but if not I have a block sitting lol
Great video hunter awsome worck
Oil pressure gauge is must on boosted Honda
That tick sounded so much like a gm push rod or maybe it's just that's always what I assume after driving 5.3 my whole life.
Sweet k series! Raise it up to a good height and daily all motor in the future :)
Good camera! I miss my 2011 civic si. Traded it in with 150k miles for a new f150 truck with Ecoboost. Ur Subaru is your daily, boost the k!!
Hell ya Hunter I agree it sound like rod knock
Oil doesn't thin out as it heats up. It thickens, hence the higher number for the rating EG. 10w-30. Since it thickens, it isn't as efficient as transmitting the pressure generated by the pump, hence the lower pressure readings.
Marcus Taber oil thins when hot...
@@AK47xSNIPES Ya idk anymore lmao
Great video!
That SI might need some rear control arm bushing if its squirreling around over a bump.. Cool car though, Cant wait to see a turbo in it!!
That's what the rear does you need adjustable rear faster camber arms. So do i
Hey I am looking for a clean del sol shell. If shit hits the fan....
Good message🤙
Nice civic si Iam looking for one myself .. but in Midwest shells n price are insane .. soo I might end up with tsx 🤷🏽♂️ will see in June.
What state is your shop in?
how much for the cams?
Where is your shop at?
Really should've timelapse the valve cover removal and valve lash adjusting
pm'd you about those parts. great vid!
"Daily" next week on hunter tuned we boosted the daily and shoot for a 9 second pass lol
I love rod knocking 😉
was it valve lash or was i wrong?
Hell yea!
I need those cams. Best way to chat with you?
Email huntertuned@gmail.com
Do you sale the injector pig tail for the decap injectors for 0bd1
Yes they come with splice in
Wastegate will crack off that manifold. I bought the same one and it only took about a month
Vtec Garage been on car for 4 years between other setups in my friend grouo
Sounds like top end 🤔
Need some 2,200 cc injectors and a little 6262 turbo.
What is a crank pulley you do recommend
Oem or ATI
@@HunterTuned yungstatic has good things to say about the professional products damper. Have you had any experience with that particular part?
8th gen 4 doors look sooo good. Nice trade!!
Almost looked like pink widow ha
Sounds like a sticking LMA
You should put little googly eyes on mr fluffy
20w50? Interesting
that was totally rod knock ,.. /wink.
you fixed it :).
Everybody hit the like button 💪
Hello hello hello!
Price for cams? Highly interested
Email
@@HunterTuned email sent.
Hunter build a car and do a giveaway 🔥
134th from the UK
sounds like LMAs
I would have said rod knock for sure
price on cams hunter? shipped to 37086
Email me
@@HunterTuned need email info..
K needs boost !! You know your gonna boost it just do it !! Lol
Do the double rail that would be cool to see iv been curious about that myself.
daanng that K series civic loook minto pinto !!!!
Why isn’t Michael in videos any more
I've been wondering the same thing for a while now.
Bushings probably shot in the rear
Parks a car with a "rod knock" on top of the dyno to warm up....😱
Lost motion Assembly
8:52
How dare you?
Contesta el correo
Gona trade coils for stock suspension..
Said no one ever.
This guyyyy lol
@@HunterTuned 😂😂😂😂😂 just raise them up a bit. No need to go stock. Lifes too boring to stay stock 😂👌
If he wants some eagle rods or a skunk intake hmu!!!!
Hell even a whole rebuild kit I have one hmu I’ll sell it cheap to you!
Email me
Have you got the CoronaVirus?
Only with a lime
Lol
4th