That is an RCN2 style controller, which means this will not be a manual control FPV drone. Its a low cost active track drone with built in prop guards that will fly like a mavic/mini
Yeah, it looks like your right. Now if it would fly acro I'd be excited but yeah, nothing to get excited about if it is just a rearranged mini with prop guards.
If the material being used for the frame is the same as the one used on the mavic mini series... Then we have a huge durability problem. Those things snap and break easily when flying regular drones, let a lone an fpv drone that flies much faster. But I honestly doubt it'll be a full featured fpv drone considering the controller they're shipping it with
@@ViewFromAbove_ if its meant to be flown like a tinywhoop or cinewhoop, then durability shouldnt be much of a problem anyway, as long as you fly carefully
Thanks for the info on the Neo. There are lots of Neo previews, with really no influencer made footage. Somehow I think this is going to be a real let-down.
So looking at the battery specs it's a 2S pack with less than a third of the same battery capacity as the Avata 2. This looks like it's going to be a cinewhoop style entry for those indoor fly throughs and small beginner flights, and does indicate that it will have a lot less punch. So a good beginner drone, potentially even for kids as well so their parents can have peace of mind. Great to see!
New to FPV Drones. I own the DJI Avata 2 and I enjoy it. Since I have the DJI Avata 2 does that mean I could purchase the HGLRC Talon 2-inch cinewhoop that you mention at the 1:30 mark and I could use my DJI Googles 3 and Remote with it since that specific drone uses the DJI FPV system?
Considering that even DJIs crop of non-FPV drones in the current gen are compatible with goggles, Im sure this will be too. And any DJI drone can fly in acro mode, its a hidden developer/testing flight mode that you can enable with the free Drone-Hacks software.
FPV Capabilities are basically confirmed. Leaked materials show a bundle available with the Motion Controller, and the current beta software for the Goggles 3 have an option for the Neo, which would also suggest it runs on Occusync
Hi can DJI Neo be launched (without controller) in drone restricted areas? Hover X1 can be launched in drone restricted areas as Hover does not use GPS.
so if I heard this right this will not be very good as a cinawoop. Do you think that it would be good for real estate photographers on indoor shoots safe and slow and not destructive to furniture? I'm trying to figure out what is its best use case scenario.
I'm guessing it will NOT be a cinewhoop competitor, but a competitor to the Hover Air X1. Just guessing though... And also, the drone in the video looks completely different from the drone in the still image. Something isn't right here.
The video is probably black and white because it was taken at night in the dark with a camera that can see in near infrared. That way the person with the drone did not know they were being recorded. Note that there are no shadows in the video.
This is annoying I've been saying for a while we need a small drone that's tough and has guards so you are less likely to loose your drone. Soldiers need a solid drone and they need less flimsy radios and googles. It's annoying I could solve all of these but I don't have access to manufacturing😪
We need AR goggles that are as thin as normal shades, 8k resolution, and have on board processing equivalent to a full-size laptop and top-tier graphics card. It is easy to make a wish list of things. The innovation to make a wish list of things is actually in the manufacturing, not in the imagining a wonderful product. A car that can fly itself and is 100% safe whilst using very little fuel and travel as fast as a bullet... I've done it again. Tiny robots that can be sniffed and then go through someone's body and destroy cancer cells.. and again. Nerve cells that can grow to replace the damage caused when someone severs their spinal cord and then cures their paralysis... again Don't feel bad. Everyone has ideas of amazing things. Sadly, it's only amazing people that make them a reality.
@@doccock100 sure but this tech exist already just a matter of getting manufacturer to make it. Obviously the government wants individual soldier lever drones
The video seems nothing like, or unrelated to, the box imagery (which is almost intriguing). It looks like someone doing customizations to other DJI builds. I wish they went the route of fully removable prop guards with easily replaceable arms and motors. The ones they have seems pointless and there seems like there is so much extra weight with the body. I wish they would do a more stripped down approach with replaceable parts cheap and easy. But I don't know $hi+. This could all be AI generated....... ALLLLLLLL.....................
I hope I can fly this with my avata2 goggles!! Its perfect for me as I live in a flight restrictuin zone and allow me to get good footage in tge suburbs here. 😊
Hi can DJI Neo be launched (without controller) in drone restricted areas? Hover X1 can be launched in drone restricted areas as Hover does not use GPS.
That is an RCN2 style controller, which means this will not be a manual control FPV drone.
Its a low cost active track drone with built in prop guards that will fly like a mavic/mini
💩💩💩💩💩💩
Oh damn! 😢
It also boasts multiple controller compatibility, it just comes with the cheapest controller.
Yeah, it looks like your right. Now if it would fly acro I'd be excited but yeah, nothing to get excited about if it is just a rearranged mini with prop guards.
If the material being used for the frame is the same as the one used on the mavic mini series... Then we have a huge durability problem. Those things snap and break easily when flying regular drones, let a lone an fpv drone that flies much faster. But I honestly doubt it'll be a full featured fpv drone considering the controller they're shipping it with
@@ViewFromAbove_ if its meant to be flown like a tinywhoop or cinewhoop, then durability shouldnt be much of a problem anyway, as long as you fly carefully
Thanks for the info on the Neo. There are lots of Neo previews, with really no influencer made footage. Somehow I think this is going to be a real let-down.
Looks more like it's coming after the Hover X1.
So looking at the battery specs it's a 2S pack with less than a third of the same battery capacity as the Avata 2. This looks like it's going to be a cinewhoop style entry for those indoor fly throughs and small beginner flights, and does indicate that it will have a lot less punch. So a good beginner drone, potentially even for kids as well so their parents can have peace of mind. Great to see!
Haha I knew I should've waited, enjoying my hover x1 in the meantime until I get this one hopefully
Selfie Drone, like the HoverAir. My guess would be no goggle connectivity. DJI Normal and Sport mode only, if that.
It's like the tello 5000 - pope mobile for your drone..
New to FPV Drones. I own the DJI Avata 2 and I enjoy it. Since I have the DJI Avata 2 does that mean I could purchase the HGLRC Talon 2-inch cinewhoop that you mention at the 1:30 mark and I could use my DJI Googles 3 and Remote with it since that specific drone uses the DJI FPV system?
Considering that even DJIs crop of non-FPV drones in the current gen are compatible with goggles, Im sure this will be too. And any DJI drone can fly in acro mode, its a hidden developer/testing flight mode that you can enable with the free Drone-Hacks software.
Will it have goggles?😁👍🇺🇸
No
@@dronecamps my followup question is would you be able to use goggles with them like you can with some of the newer mavics and minis
@Crashtopher from the leaks it has goggles and joystick compatibility. Probably v3 only but lets see
I suspect no goggle comptability, more aimed at hoverloft. Its not an FPV drone consequently
FPV Capabilities are basically confirmed. Leaked materials show a bundle available with the Motion Controller, and the current beta software for the Goggles 3 have an option for the Neo, which would also suggest it runs on Occusync
Sweet!
I’ll take 2
Can we even buy/fly them??
Hi can DJI Neo be launched (without controller) in drone restricted areas?
Hover X1 can be launched in drone restricted areas as Hover does not use GPS.
Never mind that DJI crap is that a 13 inch behind you on the wall? Dude I want one!😂
It's a 15" ... 😱
@@dronecamps dude! You got the coolest stuff! 😂😂
We need an actual mini avata!
DJI killing others, with this 2 in 1: it’s the Cinewhoop + Hover X1… and I love it !
so if I heard this right this will not be very good as a cinawoop. Do you think that it would be good for real estate photographers on indoor shoots safe and slow and not destructive to furniture? I'm trying to figure out what is its best use case scenario.
from what i know through rumour... it is a selfie drone like hover air x
I'm guessing it will NOT be a cinewhoop competitor, but a competitor to the Hover Air X1. Just guessing though...
And also, the drone in the video looks completely different from the drone in the still image. Something isn't right here.
@@MTBs Yes, the drone in the video is way bigger I think. Even if it were a test mule, the size couldn't differ by that much?
I think its like hover x1
Nice 🎉
130g means no damn remote ID. sweet!!!
Yeeeeebles
The video is probably black and white because it was taken at night in the dark with a camera that can see in near infrared. That way the person with the drone did not know they were being recorded. Note that there are no shadows in the video.
Interesting for sure!
I miss the old days when it was nearly impossible to build your own kwad and get it to fly ok😂✌️
@@DANKFPV i remember building helicopter with flybar paddles and a mechanical tail gyro lol that was impossible too even get off the floor lol
Does AI Subject tracking suggest thet the drone can follow each object_
Hope it will be compatible with goggles 3. Would be great to carry this on my bike.
Being so light I wonder what it would perform like in a low wind?
I hope they come out with a DJI micro air unit so we can put it on micro drones and whoops.
Wow impressive😮
Makes me think this is going after the X1 hover rather than FPV
It’s funny how people are leaking new drones with drones
If it’s 135 grammes it will blow away in any wind over 7mph so I can’t see it being occusink
If this isn't FPV compatible it would SUCK- Hell Mini's and Mavic can use goggles now. This little guy would be great for FPV indoors
I agree. It would be some what useless to me
@@dronecamps 💩
No good unless it's fpv
This does really look like a copy of the Hover X1 - that has been out for a year , just that is not as compact and is not foldable
googles 3 compatible?
This is annoying I've been saying for a while we need a small drone that's tough and has guards so you are less likely to loose your drone. Soldiers need a solid drone and they need less flimsy radios and googles. It's annoying I could solve all of these but I don't have access to manufacturing😪
We need AR goggles that are as thin as normal shades, 8k resolution, and have on board processing equivalent to a full-size laptop and top-tier graphics card.
It is easy to make a wish list of things. The innovation to make a wish list of things is actually in the manufacturing, not in the imagining a wonderful product.
A car that can fly itself and is 100% safe whilst using very little fuel and travel as fast as a bullet... I've done it again.
Tiny robots that can be sniffed and then go through someone's body and destroy cancer cells.. and again.
Nerve cells that can grow to replace the damage caused when someone severs their spinal cord and then cures their paralysis... again
Don't feel bad. Everyone has ideas of amazing things. Sadly, it's only amazing people that make them a reality.
What?
Prop guards have been around forever. 🤷🏻♂️
@@dangerous8333 not tough ones that a soldier can abuse
@@doccock100 sure but this tech exist already just a matter of getting manufacturer to make it. Obviously the government wants individual soldier lever drones
It looks like the Hover Air X1...maybe a better version of it!🤣🤣🤣🤣
i dont think its fpv
💩💩💩
Editing?
The video seems nothing like, or unrelated to, the box imagery (which is almost intriguing). It looks like someone doing customizations to other DJI builds. I wish they went the route of fully removable prop guards with easily replaceable arms and motors. The ones they have seems pointless and there seems like there is so much extra weight with the body. I wish they would do a more stripped down approach with replaceable parts cheap and easy. But I don't know $hi+. This could all be AI generated....... ALLLLLLLL.....................
But it’s not fpv, so it’s not a cinewhoop
💩💩💩💩💩💩
I hope I can fly this with my avata2 goggles!! Its perfect for me as I live in a flight restrictuin zone and allow me to get good footage in tge suburbs here. 😊
Too big lol
Your videos the last two day = DJI,..................THIS IS REALLY BAD!!!! DJI............Great News!!!
Hi can DJI Neo be launched (without controller) in drone restricted areas?
Hover X1 can be launched in drone restricted areas as Hover does not use GPS.
No.