[155] Update on Work Sharp Precision Adjust Knife Sharpener - AWESOME IDEA
Вставка
- Опубліковано 3 лис 2024
- Buy Lapping Films Here: amzn.to/44UgiAd
Buy 99% Rubbing Alcohol: amzn.to/42x6Roy
Buy Work Sharp Precision Pro Adjust: amzn.to/3nQCvi3
Email me if you need anything: sweetknives2020@gmail.com
Buy 3M Feathering Disc Adhesive here - amzn.to/3XxwcvO
Buy 3M Auto Sandpaper here - amzn.to/3XxwcvO
------------------------------------------------------------
Best Knives On Amazon - amzn.to/3Z9lv4k
Best Flashlights On Amazon - amzn.to/3Z5ciKd
Best Knife Sharpening - amzn.to/3vEWss4
Top Amazon Products - amzn.to/3CjPcWG
-------------------------------------------------------------
-------------------------------------------------------------
My Amazon Store: The Very Best Knives & Gear
www.amazon.com...
-------------------------------------------------------------
-------------------------------------------------------------
Contact/Email: Please email before sending gear at
sweetknives2020@gmail.com
-------------------------------------------------------------
-------------------------------------------------------------
**As an Amazon Associate, I earn from qualifying purchases.**
Follow me on social media below:
/ sweetknives
/ sweet.knives
/ sweetknives1
/ sweetknives
-------------------------------------------------------------
Recommended Playlists:
Overall Top Picks
• Playlist
Flashlights
• Playlist
Sharpening
• Playlist
Benchmade Knives
• Playlist
Legends of the Past
• Playlist
-------------------------------------------------------------
About me:
I enjoy spending time outdoors and doing everything from fishing, hunting, and hiking. I love all types of knives and sharpening them until they are razor, hair popping sharp. I also enjoy helping people better understand what knives are worth buying, and how not to get ripped off. On this channel I will be helping all of you take a look at different knives and other products that are useful and worth buying. I will also teach you how I sharpen knives along with reviewing some other awesome products along the way.
Thank you for all of your support :)
#sweetknives
#knifeunboxing
#knifereview
#knives
#knife
#pocketknife
I'm really pleased with this! It works like a charm ua-cam.com/users/postUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ Takes less time than my old electric sharpener because it can take more off the knife faster, and then it smooths out nicely with the finer grit polisher. I don't know how long it will last before the grit wears away, but I wouldn't mind having to replace it every once in a while.
This is brilliant. You just sold this system to me.
Ditto.
Hell yea im loading up the ol amazon cart right now! 🤪
Just bought mine on Amazon. Bout to put in work on my collection! Thanks for this solution! Gonna save tons of $$$
Awesome idea. You just turned my work sharp into a do all. Amazing
Best video of the year award goes to you sir!!!!
Thanks so much man
Agreed. Honestly
subbed, cool advice. got the feathering disc adhesive and various grit sandpaper but then had two strokes in 2021 and loss total use of one hand and only partial use in that arm so my knives see minimal use/do not need sharpened any longer but good to know my eleven year old daughter and I have some things to experiment once hers get dulled or we tackle the cheap kitchen cutlery for her mom
I used to do this with the 3M Wet/Dry papers up to #2500, with my KME rig.
I'd use double-sided tape, taped to the backs of the included DMT diamond plates.
Worked like a charm & very inexpensive...
Which double sided tape did you use?
I've been looking into buying upgrades for mine & this just sold me.
This video just saved me thousands of dollars!! Thank you so much
Was not sure about this system but with this hack I’m sold. Thank You!👍🏻🙏🏻
I am really glad I found this. Brilliant!! Thank you
Brilliant Very informative and eye opening Video! - Definitely going to be finding the gear to do that for when my Sharpener arrives! What a brilliant Money saving Hack! - Thank You so much x x x
I already own the sharpener, was about to buy replacement stones. Now I'm otw to auto zone for sand paper lol. Thanks man great vid
That’s awesome with the sand paper and films. Wow my knives are gonna be looking sweet
Fantastic idea thx for sharing. I've been thinking about buying a Work Sharp next week and you sealed the deal for me.
Glad I could help
Excellent I have bought the sharpener and was looking for replacement stones and could not find any, but your idea is by far the best way to go thankyou for sharing I look forward to trying this out.
Thank you for the info. Just tried and results are amazing. Mirror edge in no time. This is great. Thanks you sweetknives.
Fantastic!
@@Sweetknives would u gain anything from stropping or does the fine grit make stropping unnecessary?
Brilliant idea. I was ok using what came with the unit but this will be so easy. Thankyou.
Great idea and even more respect for sharing with people . Simple as it may seem sometimes we stumble across things that work excellent and like to tell people and im glad u did . I was in the fence about this due to no aftermarket stones of higher grit to polish except for my rant below . Being a resourceful person has allowed me to modify pretty much anything I want . I’ve been doing my blades with a ceramic rod and can get them to close to mirror but it’s a lot of work and sore arms holding everything perfect . I’m done with it and the leather wheel strop works great but marks up the blade or takes finish off . Great for tools tho bros 👍👍
Man you’re awesome. Using this method I was able to get a mirror edge with a cheap not inexpensive but cheap Smith’s precision sharpener from Walmart.
Thanks again, glad it helped out.
I was just trying to figure out the best way to use automotive paper when the algorithm popped this up in the background. Now I know a) it wasn't as bad an idea as I usually come up with, and b) ... fuckin' A. Thanks!
Thank you so much for your video. I just purchased the work sharp upgrade kit and this video was invaluable. I will, without a doubt, wil be buying all the items you used to get that mirror edge. I'm so happy I found you video! Awesome job!!!
Just put this vid to use as exactly as you did and it worked great! I am a newbie when it comes to sharpening blades but when I it took hair off my arm with easy i was super impressed. Thanks again.
You sir have made my day!! I just ordered the Work Sharp a few minutes ago!!
my worksharp PA comes in the mail tomorrow and this was one of the things I was going to try.. excellent video! keep up the good work and thank you for confirming this for me.. keep the videos coming! just subscribed and liked
Neeves knives and liv them knives would be proud of you dude 😊👏
I have to concur, “Brilliant!.” Thanks!
Thank you so much. I bought this system the day it hit amazon. I love this system and have pretty much wore out the two diamond stones. This has taken about a hundred knives to do and they still work but it's taking an hour to get an edge on a cpm s30V blade when it was new I could do that in 10 minutes. Due to high demand I can not get replacement stones. This will buy me alot more time before replacement stones are needed what a godsend.Thank you sir.
The harder steels like S30V do take more time, especially with the included 320 grit, you really need like 100 grit or less on the early stages with those types of blade steels.
Just ordered this while set up. I was gonna drop 350 on a kmi fixed angle. You saved me a ton of money
great video!
Amazing vid. Thanks. Two thumbs up
At first I was like I've been using 3m lapping films for years but that 3m stuff is awesome man.
Nice video
That blade Cane out just as nice as all the expensive systems on You Tube and you weren’t really trying.
Excellent brother thank you for this awesome hack 🤙🏻🔪
Brilliant. I had a similiar idea for freehand. Lightweight in pack kind of thing. The 3M and the stone ( I’ll use lansky) just puts it over the top. Nice. Sir, you win the internet.
FYI: Amazon shows that the 3M 08051 adhesive is not currently available. Some other sources saying it has been discontinued. The 3M website shows it, but says it's not for consumer sale or use.
I just use double sided carpet tape. Works great and removes easily
I don’t know why you don’t have more subscribers? I’m here for as long as you’re around!! Awesome video
This video was awesome to watch. Especially, making razor sharp mirror edges. I already planned on getting one of these sharpeners. Now, im going to go that extra mile and do what you did. Thank you so much.
I though about this idea so many times but never figured out the adhesive... in the past I've used super77 for a permanent bond but this this is a game changer I was planning to get a blitz360 form tsprof and a set of blanks to play with and thanks to you and your grand wisdoms here I know exactly what I'm going to do with them 😈 save a shit tone of time and money over the life of the sharpener and my own life for that matter... awesome video and I wish it was more Amin stream I was looking all over for ideas before I stumbled across this little gem! Thanks again for sharing its greatly appreciated!!!
🥃cheers🍻
Why the feathering disk adhesive vs. A double sided tape? Awesome video and going to order this sharpener now.
I just got mine today it's fast and easy so far and the vid just makes it better
Great idea thanks !
I have the higher end version of the PA. it included 6 grits and a leather strop. I love mine
Genius idea 👌🏻. That is mega polished edge.
I looked high and low for this 3m stuff and couldnt find it I got "Aleenes tack it over and over" its like 4 bucks for a 4 oz bottle and it works perfectly. Its also water soluble so even if you leave it on overnight you can just scrub it off. I literally just did my first 2 knives on this up to 10,000 grit and it works like a freaking charm I didnt even use any of the diamond grits because they seemed inconsistant with the sandpaper grits I got. Six bucks for 120-10000. so ten dollar investment for what would have cost hundreds. Great trick thank you so much!
Good information that 3M stuff is no where to be found.
I just bought this sharpener and was looking at the replacement abrasives on the work sharp website. All of the replacements were out of stock. Thanks for the info on the adhesive. This will definitely save me some money.
Glad I could help
Thank you for making this video! This changes the game for this sharpening system.
After someone here mentioned double sided tape, I went ahead and got a roll of 3M Scotch Removable double sided tape commonly used for photos and pictures. It also works like a charm. The tape is wider than the stone and I had to trim it using a Xacto knife but it works almost exactly like your adhesive and for one-third of the cost. 👍🏻
I'm currently trying this system with my Maxamet PM3 and will see if I can put a mirrored edge there. Fingers crossed.
Great idea!
@@Sweetknives Thanks! By the way, what was your sharpening angle on this video?
@@MrDands close to 20 degrees
Dude! You have shown us the holy grail! I ordered everything as soon as the video was over. Just a note. The adhesive is now $40 😬. I am stoked to get my supplies. Sharpener arrives today, the papers tomorrow and hopefully the adhesive comes soon too. Thanks for the great idea! I ordered this sharpener before I saw you video and was tempted to send it back but now.... nope! Mirror on a Swiss Arm Knife, 🤯
Glad you like it. Thanks
3M 77 spray adhesive is just as good if not not better and easier to use and cost a LOT less.
I've been using it for years. (also sold at Wally world).
KnifeMaker
Ha that’s so ironic. I literally was sprucing up my edge tonight and I panicked a little cause I couldn’t find my adhesive. Good to know there is a cheaper alternative!!
@@michaell39777 is a permanent bond.
Thanks a lot.
Wow. Just discovered this video and it’s still amazing! Used your method to reprofile my Kershaw Cryo that I messed up on while learning to freehand sharpen on whetstone. Was able to slap on 100 grit aluminum oxide sandpaper and the adhesive worked fantastically. Thank you!
Like you said, a little goes a long way, and you do have to wait a while for it to initially get tacky so your sandpaper doesn’t slide around. With the coarser grit, it’s helpful to start slow and use a pull stroke only. After the grit settles in, then it’s easier to go up and down to hog off material faster.
Great hack! Thank you! Ordered the 3M adhesive through your link.
Way to go!! Bravo 😊
I've tried sharpening my pocket knifes with wet stone, it's a mess and a pain in the get accurate. You sold me on this sharpener.
Seams good, lots of options.
Dude, amazing! I've wanted a system like the kme to the point that I built a clamp and guide bought the stones for it and all that to have something close. This, however, sure genius! Absolutley brilliant 👏 great stuff bud.
Glad I could help!
Subscriber 5700 here! What a great number ☺️ greetings from Austria
Thanks for subbing!
very good tip
Why haven't i thought of this before? Excellent idea! Doing this with lansky! Thankyou!
I just bought one and really thank you for sharing this, you are awesome!
Fantastic idea, way to use the knoggin. I’m in and thanks.
Alright I’m sold
Amazing exactly what I was looking for
Awesome video brother! iv thought about picking up this sharpener and you've sold me on it! thanks for the video!
Beautiful work, my friend. Thank you for this!
Genius 👍
Excellent idea and video. I apologize for not saying that initially.
Thanks
Hi
Thank you for your good video, how long does this knife sharpener usually work? And after how long should it be replaced?
This is so great 😀!! Thanks a million. Keep up the great work.
Thank you! Will do!
SUPER excited now that I already have one of these ON THE WAY l. It had finally shipped after weeks of being out of stock. Your idea is straight up amazing 💡
You will love it.
Great video, nicely done!!
I'd already ordered one ($49.95 but likely won't ship until the 30th) before seeing this video. This is friggin' brilliant!!! I'm so going to have to get the supplies & add them to my kit. Thank you ;)
Where did you find one? Amazon? They are telling me 6/21 is soon as they will be available.
@@JohnDavis-yz9nq I ordered on the 10th, expected to ship on the 30th. Now they expect orders placed now to ship in mid january. They fill orders as they get stock:
www.sharpeningsupplies.com/Work-Sharp-Precision-Adjust-Knife-Sharpener-P1887C130.aspx
@@stuartfarish2435 thanks Stuart. I was trying to go through Amazon and all they would do is add it to my wish list. Thanks for the link. Also I have a spyderco triangle sharpener that I may experiment with sand paper on the white triangle stones. Think about it. Three different sides means three different grits. I think it will work if not much pressure is applied during sharpening. Your thoughts?
@@JohnDavis-yz9nq It finally shipped today. That makes almost a month to the day.
@@stuartfarish2435 thanks for the update. I think it is one of the better sharpeners on the market. Just wondering are you going to use the adhesive with paper like in the video?
That is a GREAT idea. Thank you for the tip.
I was going to buy that sharpener for my swiss army knives but I was worried that the blade would be too small for the clamp, great video even though you are very close to rubbing the clamp there.. how do you find it for sak?
Hi. I appreciated this video and went on Amazon prime to purchase the adhesive. They are all sold out. Do you have another option of an adhesive that would work? I really want to give this a try.
Great ideas! Thank you. Have you considered Nano tape in lieu of the 3m compound? No residue. Super sticky. Can even be washed if dirt collects on it over time. Much cheaper too
With a little research you can find 3 M pressure sensitive abrasives (PSA) plastic backed . It comes in all grits in full sized sheets. I use cut strips with the ceramic Lansky stone.
I just bought psa lapping film from the Taylor company he spoke of. 14$ for 7 grits
I have seen the PSA backed. The question is.... if you put this on the ceramic side can you take it off easily and reuse or is the ceramic side ruined after? It's actually cheaper with the PSA being you don't need to fork out 20 plus bucks for the adhesive.
@@Cracktower1 It peels right off. It may leave a little adhesive that rubs off with a thumb.
dope video great info excited to try this sharpener out.
How well does sandpaper cut super steels? I remember hearing that you need diamond to sharpen some of the high-end steel.
double-sided tape would work and be cheaper?
Oh and subscribed
If I order 2 ceramic replacement stones I could essentially have a 3 sided system exactly how I want it using your hack.
Mahalos from Hawaii
You can do clickbait advertisements for this video
"Knife sharpening companies HATE this one simple trick!"
I hate click bait. I avoid it and won't go back to a site that uses it. In this case, there might be some truth to knife sharpening companies hating this trick. They would rather sell you the accessories. It looks like he has several videos on using this sharpener.
Great idea! I hate when companies come out with proprietary items only they sell.
great ideea!
i do something similar, i just put electrical duct tape at the egdes. i use the ceramic in combination with metal polishing compound. i only use 2000grit . im pleased with the results, for me is no need to go 1000 and 1500 before 2000 and then ceramic. my knifes are not so high end. just some cheaper Spyderco (prices in Europe are double then USA) and some multitools, Gerber, Skeletool CX, Surge. on Surge i only attempted to sharp with Worksharp. the recurve does not allow it.
Excellent idea, thanks for sharing. I’m def doing this.
After watching your video multiple times i have an idea about my spyderco triangle sharpener with the white ceramic stones and the paper and adhesive. Mainly with the coarser paper and very little pressure. Being careful I do believe it will work. Awesome video. In my opinion it is the best on UA-cam. I will probably buy this sharpener when they are available.
Awesome to hear you liked the video, hopefully it works for you on the Spyderco triangle sharpener too.
@@Sweetknives I really think it will work on the triangle stones as well if a person uses the right grit paper and doesn’t apply too much pressure. Use the weight of the knife for the amount of pressure. The worst part is buying the adhesive. $30.00. Like you say it will last forever.
I can’t seem to completely work the kinks out of using the belt grinder style work sharp. This is an affordable system as well. Same concept as some super expensive items. I think I’m sold on this product
The sharpener was in my Amazon cart and I was reading and watching people say they wish there were more stones available, but you just sold me. I'll be ordering the compound from your link too. Can't wait to cut those strips and get a mirror edge. BTW what degree angle were you sharpening at? I read that if you get low enough on a narrow knife the clamp will get in the way of the stones.
YEAH! THIS IS THE 3RD VIDEO I'VE SEEN ON THE WORKSHARP .this is The Best one yet ! Thanks for the Tips. I've spent alot of money on Lapping film. For my pricey! System. Your help is going to save me Money and give me a Better mirror finish! What about strop? That would make mirror edge even better!! NEW Subscriber
Keep Up the great Video's
😉😁🦊😄🐅😉🐅🐺
With the high lapping films above 3000, 6000 grit, or 6 micron you dont need to strop. Its personal preference but I have found with the ultra high lapping films you dont need to strop at all if you have your angle lined up right.
Bedankt voor deze uitstekend tip
I just ordered one of these tristone guided sharpeners. How well does it work with just the original Three stones? I just want my knife sharp I don't care about polished Edge. Thank you in advance
Just subscribed and bought the worksharp off Amazon. They need to pay you for selling their product.
Buy Work Sharp Precision Adjust here - amzn.to/3jpsE0t
Buy 4 Packs of lapping films via PayPal here - py.pl/1OnqzC
Buy 6 Packs of lapping films via PayPal here - py.pl/QN9YN
Buy 3M Feathering Disc Adhesive here - amzn.to/3XxwcvO
great idea...loved your video I am going to try this, thanks
Do you recommend this technique over the upgrade kit by worksharp?
yes
Cool Shades ! L. O. L.
I need my glasses nowadays. 😁🦊😉
Awesome review. I ordered one of these sharpeners and then cancelled it. I was going to get a KME for 5x the cost but a tube of that 3M adhesive and all the sandpaper grits I want and this sharpened will be perfect!
Good choice!
Excellent idea
I just bought 3 spare Work Sharp stones. Same grits as the original 3 stones. They were only $7 bucks a piece. 3 for $21. Thats super affordable and a great price compared to the other top of the line sharpeners.
How are they replaced? Do the original stones slide out?
@@matthowell4623 i havent tried yet. Ill let you know when i get a chance. Maybe this weekend.
@@matthowell4623 The new stones come with double stick tape on the back of them. So if I had to guess they don't slide out, you probably have to pop them out and then restick the new ones with the double stick tape back in.