Installed my kit on 2017 siverado crew cab yesterday. Took 30 minutes and was easy. Plenty of room now for subwoofer enclosure. I'm 5'9" and my head does not touch the roof. Back seat is actually more comfortable now. Lee answers the phone for any help needed. Thanks again LMI
Just got mines in the mail. And took me about 45 min to install, no power tools and help with this Clip. Only one issue with the seat belt bracket that it did not fit with the assist bolt. But just snapped it off and it secured good.
If u buy the kit and dont use the extenders on back of the seats they will fold down and they will also latch when u put the seats back up. I just installed this seat riser in my 09 to put a stereo in the truck. Kit worked awesome. Very straight forward install.
Trying to exactly understand what you are saying. You did not use the extenders for the back rests and they fold down when you lift the bench seat? They still latch on when the seat is folded down?
The 1425 GM kit is priced the same as our other kits at $145.00 plus $18.00 for shipping and handling. We ship via USPS priority and most times they are shipped out within 2 to 4 days.
PSA: If you’re installing on a NNBS Sierra like I did, you’ll want to put the included hardware on the brackets (nuts on top) before installing the brackets on the truck. The factory studs are too long to insert the hardware after installing the brackets. Then once the brackets are installed and tight, you can remove the nuts and drop in the seats.
Lee the only bad thing is i went to chevrolet to get the rear seat plastics that go in the bracket and they were installed right and as soon i unfolded the seat they all cracked :(
Guys, if you drive a 2019-20 Silverado High Country or GMC Denali. Make sure to specify that when you talk to Lee. The 1425GM kit does not work. I found how the hard way, but Lee took care of me. The 1920 CB is the kit you will need.
Thanks Anthony. The 1920CB is the one to order if you have the cargo bins or cubbies, as some call them. They are a small door that is in the seat back. Some of the 2019 High Country and GMC Denali are equipped with them. For 2020 they more widely used but there is more than one option regarding which seat your truck may have. Call for guidance on ordering. Lee
Our kit is only available in the 2 1/2 inch lift. We are not planning on making any additional heights due to restrictions with our equipment and the physical limitations in that truck affecting the installation.
The point is to lift the seat but I went to the website to order the kit and the kit for a 2014 is different to the one on this video the website says that the kit for a 2014 and up let's u fold the back rest down to access a storage pace per say I was just asking to see if I read that correctly
Yes, after the lift kit is installed on the 2014 and newer trucks it does allow you to lower the seat back and gives you access to the area behind the seat.
This is a great video, very detailed and thoroughly explained. Are there any kits for newer models? I have a 2020 GMC 1500 Sierra Crew Cab, count find any lift kits nowhere. Any help would be greatly appreciated.
We now have a rear seat lift for the 2019 and newer trucks that have the cargo bins in the seat backs. The 1920CB is a 2 inch lift. There are a few exceptions and differences in the years 2019 through 2021 so please visit our website for details. www.lmiwelding.com Thanks, Lee
I have a 2014 crew cab, my rear seats has a plastic bumper instead of the plastic clip shown in the video. I would rather have the clip shown, is that part of the kit or what model truck has that? (Rear upright seat latch on back wall) Some other videos show the top of the seat folding down as well as bottom cushion folding up. Will this kit do that as well?
The latch hoops on the seat backs are not used or needed in the 1425GM kit which is the one for your application. The seat back will fold down for access to the area behind the seat yet it will still lock in the upright position. Lee
You make any that scoots the seat FORWARD an inch or two? I would like to squeeze an 8 inch shallow sub in behind the seat if I had another inch or two of space...
We are currently 4 to 5 days out on shipping orders. We make every effort to get them out as quickly as possible. We do ship via USPS Priority so you should receive it in two to three business days once we ship it out. Lee
I ordered a kit for a 2015 Silverado crew cab 1500 LT they sent me the 1435 GM Kit but the seat back parts came up short what do I have to do or how do I get them longer the seat backs?
If u buy the kit and dont use the extenders on back of the seats they will fold down and they will also latch when u put the seats back up. I just installed the seat riser in my 09
Right now we are about 4 days out on shipping and USPS priority gets it to you in 2 to 3 days. We are hoping that in the near future our supply chain will allow us to have inventory on the shelf at all times. Thank you for your order. Lee
The1425 GM kit fits all GM trucks from 2014 through the 2019 except the 2019 Denali models equipped with the cargo bins in the seat backs. We are not sure about the 2020 models at this time. Lee
We now have a rear seat lift kit for the 2019 and newer trucks that are equipped with the cargo bins in the rear seat backs. The 1920GMCB is a 2 inch lift for those trucks. Our 1425GM is for the conventional rear seat in all the 2014 and newer trucks including the 2019 and 2020.
Yes, the 1425 GM is the kit for your truck. Shipping and handling to Hawaii is the same as the rest of the US at $18.00 so the total is $163.00. Thank you.
We offer a kit for the trucks equipped with the rear seat that has the cargo bins in the seat backs. The 1920CB is a 2 inch lift for that application. At this time we don't have a product for the other seat options for the 2020 and newer. The 1920CB is $185.00 + $18.00 shipping and handling. Thanks, Lee
The 0825GM kit works with the new body style 2007 trucks. We do not have a kit for the 2000 through mid 2007 trucks, also called "classic style" trucks. Lee
I am not familiar with a TB designation. The 1425GM fits all 2019 trucks except the Denali with the cargo bins in the rear seat backs. If you have that option you need the LMI 1920CB. It is a 2 inch lift priced at $185.00.
The 0825GM kit is the one for your application. The hardware is the same for extended cabs and crew cabs, just different size cushions. www.lmiwelding.com is our newly designed website. Lee
@leeseifert4258 got the 1425 kit for my 2019 gmc sierra extended cab and the seat lift does not work. Whats the return process like? Cant get the seat back to line up at all.
getting ready to install my kit on a 2017 gmc crew cab, has anyone installed this kit by bolting brackets to seat first before bolting to the floor, just curious if this will work or is there a reason they bolt to the floor first. thanks
You won't be able to get the lower hardware in once the upper hardware is installed. The upper hardware has a nut on the inside of the bracket, you need that space clear to install the lower bolt.
We don't have a kit for your truck. The LMI 0825 GM is for the late model 2007 through the 2013 and the LMI 1425 GM is used on the 2014 and newer Chevrolet, and GMC trucks.
I have a seat lift that’s about 2 inches if I go any higher it won’t latch anymore, I need something that can at least lift my seat 5 inches do you have something available? I have a speaker box under the seats already but need something that can go higher please and thank you.
so could this guy stack two of the 2.5" lift kits?? if yes, it might cause headroom probs for adults but for this guy, at least his speakers would fit. then again that's $290 (2 x $145) and new speakers could be cheaper..... or maybe find a cabinet maker to help you (build new? or) cut down your speaker boxes and maybe the 2.5" lift might work? just a thought, hope this helps.
Lee here from LMI Welding. We want to announce a new rear seat lift for the 2010 and newer Ram trucks. The LMI 1020 RAM kit raises the rear seat 2 inches for additional room for all your audio equipment. An added feature is the ability to fold the seat back down to give you access to the area behind the seat. The seat will still lock against the back of the cab for safety. It is a very simple installation and all the hardware needed for the install is included with the kit. Call us for details or to place your order. 800-345-5623 www.lmiwelding.com. part # LMI 1020 RAM
Yes, our kits are available and can be ordered through our website or by calling us at 1-800-345-5623. We have the 0825 GM for the 2008-2013 and the 1425 GM for the 2.5 lift for the 2014 and newer Crew cab and extended cabs.
@@mac4782 Thank you for the interest in our products. The 1425GM will work with all the 2019 trucks except the trucks with the "cargo bins" built into the back cushion of the rear seat.
Installed my kit on 2017 siverado crew cab yesterday. Took 30 minutes and was easy. Plenty of room now for subwoofer enclosure. I'm 5'9" and my head does not touch the roof. Back seat is actually more comfortable now. Lee answers the phone for any help needed. Thanks again LMI
Man, do I wish you had these for the '06 and earlier crew cabs, these are just what I need.
I do not need to raise my seat, but I found your video very helpful for set removal. Thanks!
Extremely easy and a good price. The seat keeps it functionality and is just a great quality product.
Just got mines in the mail. And took me about 45 min to install, no power tools and help with this Clip. Only one issue with the seat belt bracket that it did not fit with the assist bolt. But just snapped it off and it secured good.
Edward Jaramillo hey hopefully you’ll respond does it cause squeaking or any noise as your driving?
This is a good video and makes it really easy to understand. Thanks for your clear and concise directions
Thank you, It is always great to hear from our customers. Lee
If u buy the kit and dont use the extenders on back of the seats they will fold down and they will also latch when u put the seats back up. I just installed this seat riser in my 09 to put a stereo in the truck. Kit worked awesome. Very straight forward install.
Trying to exactly understand what you are saying. You did not use the extenders for the back rests and they fold down when you lift the bench seat? They still latch on when the seat is folded down?
Ordered my kit for 2015 Silverado double cab. Looking forward to getting it and installing.
Hey man did you kit work on your truck ?
I’m thinking on buying this kit I also have the double cab truck
@@park1990able 9 months later and still working great 👍🏼
The 1425 GM kit is priced the same as our other kits at $145.00 plus $18.00 for shipping and handling. We ship via USPS priority and most times they are shipped out within 2 to 4 days.
Where can I order
PSA: If you’re installing on a NNBS Sierra like I did, you’ll want to put the included hardware on the brackets (nuts on top) before installing the brackets on the truck. The factory studs are too long to insert the hardware after installing the brackets.
Then once the brackets are installed and tight, you can remove the nuts and drop in the seats.
Bad ass kit sir just got mine today going in my truck tomorrow quality is amazing houston audio lab recommended me u guys
Thanks Alexis, we appreciate it.
Lee the only bad thing is i went to chevrolet to get the rear seat plastics that go in the bracket and they were installed right and as soon i unfolded the seat they all cracked :(
@@alexiscoronado2730 Hot weather will do that unfortunately.
Yeah its hot in texas but either way without them the bracket makes a tight fit and they dont rattle
Lee do u send a extra bracket ?
Thanks Lee, for making this product.
Thanks Stephen. We appreciate your business.
Is there different size kits you guys offer? Thanks and very nice video
Guys, if you drive a 2019-20 Silverado High Country or GMC Denali. Make sure to specify that when you talk to Lee. The 1425GM kit does not work. I found how the hard way, but Lee took care of me. The 1920 CB is the kit you will need.
Thanks Anthony. The 1920CB is the one to order if you have the cargo bins or cubbies, as some call them. They are a small door that is in the seat back. Some of the 2019 High Country and GMC Denali are equipped with them. For 2020 they more widely used but there is more than one option regarding which seat your truck may have. Call for guidance on ordering. Lee
Where can I order the kit from for a 07 GMC Sierra ext cab and how high can we raise them?
Yes, the 1425 GM is the kit for your application. it just works for the rear seat.
Our kit is only available in the 2 1/2 inch lift. We are not planning on making any additional heights due to restrictions with our equipment and the physical limitations in that truck affecting the installation.
So if I install these and don't put the longer bracket at 5:45 I can put the seat down if I want too. Planning on putting some amps behind the seats
Yes your right. If want to put amps on the back wall you don’t put the longer brackets
@@HoustonRocket281 okay thanks
Would you be about to make the same kit but in 4 inches?
Any chance you guys are working on a 355 version? There's a huge community of truck owners that would be all over it.
Can we get an explanation of the diffrent bracket for the back of the 2014 and up please
On the kit for a 2014 silverado crew cab the kit allow u to fold the back rest part down at when wanted down for the storage
jdmbeto what is the reasoning for the rear seat lift kit
The point is to lift the seat but I went to the website to order the kit and the kit for a 2014 is different to the one on this video the website says that the kit for a 2014 and up let's u fold the back rest down to access a storage pace per say I was just asking to see if I read that correctly
Yes, after the lift kit is installed on the 2014 and newer trucks it does allow you to lower the seat back and gives you access to the area behind the seat.
how do i get a kit to Canada ..didn't see a option on your web page?
Will this work on a double cab bench seat ?
Do you have any kits for a 99-06 Chevy?
do any of u guys with this notice any comfort loss when sitting in the back
Will y'all try making one for 03-07 silverado in the near future?
Hi Victor. We have no plans to try to do that model. There is a complex folding issue that can't be overcome easily.
Lee
This is a great video, very detailed and thoroughly explained. Are there any kits for newer models? I have a 2020 GMC 1500 Sierra Crew Cab, count find any lift kits nowhere. Any help would be greatly appreciated.
We now have a rear seat lift for the 2019 and newer trucks that have the cargo bins in the seat backs. The 1920CB is a 2 inch lift. There are a few exceptions and differences in the years 2019 through 2021 so please visit our website for details. www.lmiwelding.com
Thanks, Lee
Excellent vid!
I know this video is old, but do you sell a kit for the 2nd row bench seats for 2004 Suburban? Or will the same kit in the video apply?
How many inches does this raise the seat?
Does anything go under the driver seat legs towards the middle where the two seats bolt together?
My kit had 2 additional brackets compared to what they show in this video.
Where can I get them, I need for a Chevy Silverado 2014?
www.lmiwelding.com
Does it matter if the nuts are on the top or bottom?
They work better if the nuts are on the top.
Need some for 2004 avalanche
I have a 2014 crew cab, my rear seats has a plastic bumper instead of the plastic clip shown in the video. I would rather have the clip shown, is that part of the kit or what model truck has that? (Rear upright seat latch on back wall) Some other videos show the top of the seat folding down as well as bottom cushion folding up. Will this kit do that as well?
The latch hoops on the seat backs are not used or needed in the 1425GM kit which is the one for your application. The seat back will fold down for access to the area behind the seat yet it will still lock in the upright position.
Lee
You make any that scoots the seat FORWARD an inch or two? I would like to squeeze an 8 inch shallow sub in behind the seat if I had another inch or two of space...
I just got your kit it's awesome.
What is that air wrench you're using?
P#???
Air rachet
How long to expect for shipping?
We are currently 4 to 5 days out on shipping orders. We make every effort to get them out as quickly as possible. We do ship via USPS Priority so you should receive it in two to three business days once we ship it out.
Lee
@@leeseifert4258 appreciate the quick response! Was just trying to plan for install. I got my tracking number today. Thanks
I ordered a kit for a 2015 Silverado crew cab 1500 LT they sent me the 1435 GM Kit but the seat back parts came up short what do I have to do or how do I get them longer the seat backs?
I order this kit for my 2019 Chevy Silverado does anyone know if it works for that model ?
I'm interested in this lift for my 2012 Silverado. Will this allow the seat back to be folded down for access behind the seat?
No, that feature is only available for the 2014 and newer trucks.
If u buy the kit and dont use the extenders on back of the seats they will fold down and they will also latch when u put the seats back up. I just installed the seat riser in my 09
What size bolt are used to hold the actual seat to the bracket
Just ordered my kit, whats the average delivery time?
Right now we are about 4 days out on shipping and USPS priority gets it to you in 2 to 3 days.
We are hoping that in the near future our supply chain will allow us to have inventory on the shelf at all times.
Thank you for your order.
Lee
Already visit your website, just I want to make sure if you have available for 2019 Chevy Silverado new model?
The1425 GM kit fits all GM trucks from 2014 through the 2019 except the 2019 Denali models equipped with the cargo bins in the seat backs. We are not sure about the 2020 models at this time. Lee
@@leeseifert4258 thanks
We now have a rear seat lift kit for the 2019 and newer trucks that are equipped with the cargo bins in the rear seat backs. The 1920GMCB is a 2 inch lift for those trucks. Our 1425GM is for the conventional rear seat in all the 2014 and newer trucks including the 2019 and 2020.
Can I still buy this
Hey brother I’m really interested on buying the same kit where can I buy from or how can I find them???
How much is the kit for the 2014 and up sierra crew cab?
How many inches is the steel tubing of the lift? I think i will be buying a kit from yall. Please let me know asap
MrYodeepYD The kit raises the seat 2.5 inches. All pieces are formed steel. Square tubing isn't used. Thanks.
What is the cost of the brackets
The price of the kit is $145.00
Does lmi 1425 fit 17 Silverado 1500?
Yes, The LMI 1425GM fits the 2014 through current year 1500 - 3500 trucks.
I'm looking for a kit to raise the back seat of my 2018 crew cab, do you ship to Hawaii?
Yes, the 1425 GM is the kit for your truck. Shipping and handling to Hawaii is the same as the rest of the US at $18.00 so the total is $163.00. Thank you.
Will this kit allow me to lower the seat back? Or is the seat backing still not movable?
The seat back will be able to be lowered to the horizontal position on the 2014 and newer models. They are the trucks that use the LMI 1425GM.
Lee
What’s the average wait time for shipping?
We are usually able to get them out within 3 to 4 days. We ship USPS Priority so it is 2 to 3 days once we ship it out.
Thanks,
Lee
Will this work for a 2005 GMC Sierra extended cab ?
No, we don't have one for those years of GM trucks.
Will this lift kit work for 2021 Chevy Silverado 1500 crew cab?
We offer a kit for the trucks equipped with the rear seat that has the cargo bins in the seat backs. The 1920CB is a 2 inch lift for that application. At this time we don't have a product for the other seat options for the 2020 and newer. The 1920CB is $185.00 + $18.00 shipping and handling.
Thanks, Lee
I've got a 2002 GMC Sierra SLE extended cab. What kit is for me?
Hi Zachary. We don't offer a kit for that year and series of trucks. Sorry we can't help you.
Is there a kit that works for a 2007 Sierra crew cab
The 0825GM kit works with the new body style 2007 trucks. We do not have a kit for the 2000 through mid 2007 trucks, also called "classic style" trucks.
Lee
@@leeseifert4258 do you know anyone that makes the kits for a 01 extended cab I can't find any online
@@alexclakley8150 I don't know of anyone that has a kit for that application.
Lee
Where can I buy the kit
Do you have something for Silverado 2019 TB new body design?
I am not familiar with a TB designation. The 1425GM fits all 2019 trucks except the Denali with the cargo bins in the rear seat backs. If you have that option you need the LMI 1920CB. It is a 2 inch lift priced at $185.00.
@@leeseifert4258 Trail boss
Do you have a set that will fit a 2004 Chevy avalanche? And where can I purchase?
Sorry, we don't have a kit for the older GM trucks.
Is there a riser kit for an 03’ ext. cab classic ?? I can’t find one. Let me know please and thanks..
No, we don't offer a kit for the early GM trucks. Sorry we cant help you.
Lee
Lee Seifert thanks anyway. I appreciate your reply..👍👍👍
How do I find this kit for a 2009 Chevy Silverado 1500 existended cab so I can order
The 0825GM kit is the one for your application. The hardware is the same for extended cabs and crew cabs, just different size cushions.
www.lmiwelding.com is our newly designed website.
Lee
wish they made these for second row tahoes
How can i order it? I need them!!
Felipe, you can order from our website www.lmiwelding.com or call us at 800 345 5623.
Thanks, Lee
@leeseifert4258 got the 1425 kit for my 2019 gmc sierra extended cab and the seat lift does not work. Whats the return process like? Cant get the seat back to line up at all.
getting ready to install my kit on a 2017 gmc crew cab, has anyone installed this kit by bolting brackets to seat first before bolting to the floor, just curious if this will work or is there a reason they bolt to the floor first. thanks
You won't be able to get the lower hardware in once the upper hardware is installed. The upper hardware has a nut on the inside of the bracket, you need that space clear to install the lower bolt.
@@jonmarshall8458 got it, thanks
Why would one want to raise the seat?
Gives you more room to put stuff under the seat.
@@thebigrich theres a cargo box in the back
Car audio guys love this too make room for speakers
For a sound system
@@earleclemans4836 to fit slightly bigger speaker boxes
Hi just ran across your video do you have a kit for a 2006 4 door Silverado and if how much
We don't have a kit for your truck. The LMI 0825 GM is for the late model 2007 through the 2013 and the LMI 1425 GM is used on the 2014 and newer Chevrolet, and GMC trucks.
I’m looking for the same thing
Did you find anything else that fit?
@@thomasdaddy917
No sure didn't
I have a seat lift that’s about 2 inches if I go any higher it won’t latch anymore, I need something that can at least lift my seat 5 inches do you have something available? I have a speaker box under the seats already but need something that can go higher please and thank you.
Pedro Pineda We don't have anything other than our 2.5 inch lift and I am not aware of any other lifts available.
Lee
so could this guy stack two of the 2.5" lift kits?? if yes, it might cause headroom probs for adults but for this guy, at least his speakers would fit. then again that's $290 (2 x $145) and new speakers could be cheaper..... or maybe find a cabinet maker to help you (build new? or) cut down your speaker boxes and maybe the 2.5" lift might work? just a thought, hope this helps.
Lee here from LMI Welding. We want to announce a new rear seat lift for the 2010 and newer Ram trucks. The LMI 1020 RAM kit raises the rear seat 2 inches for additional room for all your audio equipment. An added feature is the ability to fold the seat back down to give you access to the area behind the seat. The seat will still lock against the back of the cab for safety. It is a very simple installation and all the hardware needed for the install is included with the kit.
Call us for details or to place your order. 800-345-5623
www.lmiwelding.com. part # LMI 1020 RAM
Yes, our kits are available and can be ordered through our website or by calling us at 1-800-345-5623. We have the 0825 GM for the 2008-2013 and the 1425 GM for the 2.5 lift for the 2014 and newer Crew cab and extended cabs.
Lee Seifert hi Lee, I'm looking to raise my rear seats in my 2015 silverado crew cab 1.5-2", do u sell the brackets?
do u have 2006 rear seat lift kits
No, we are currently making the kits only for the 2008 and newer trucks. We aren't planning on building one for the older models at this time. Thanks.
Lee Seifert how much is the 08 25 seat bracket kit
Lee Seifert any update on making the brackets for the older models yet?? Sure wish you would.. thanks.. specifically 00’ -06’!!
Way to high
will this work for a 13 1500 extended cab?
How many pieces are in 0825 kit just got mine in today and i got 13 pieces total plus a bolt bag. On this video shows 11
13 is the correct number of pieces.
Lee
@@leeseifert4258 thank you lee just wanted to make sure i reseived all the parts in my kit
I need this for a 2013 Silverado extended cab. Do you make it ?
Yes, the LMI 0825 GM is the kit shown in the video and it for the late model 2007 through the 2013 trucks. Order from our website www.lmiwelding.com
Lee Seifert I see on your website that you only have it available for crew cab is this a universal piece for both?
@@garrettsasome888 The extended cab and Crew cab share the same mount points. The only difference is the size of the bottom of the seat.
Do you have a kit for the 2019 crew cab Silverado yet sir?
@@mac4782 Thank you for the interest in our products.
The 1425GM will work with all the 2019 trucks except the trucks with the "cargo bins" built into the back cushion of the rear seat.