A good discussion of CG would have been very useful. Important for a plane this light, and without some added velcro the battery can shift in this plane.
I just purchased the Conscendo Evoloution PNP. I have a NX6 6-Channel DSMX Transmitter and want to install and bind an AR6610T Telemetry Receiver in this plane. When I remove the bottom cover as per the instruction manual the space where I'm instructed to place the receiver has the throttle wire and connector coming from the ESC bound by a short metal tube. This tube makes it almost impossible to locate the receiver in this spot. Any suggesting on how to work around this. Also, the receiver comes with two six inch wires. I've not had these on any receivers I've used in the past. I'm guessing that they lead out the two holes in the back of the cover?
Frame 1:09 - - I am using the Specktrum DX6e - Are these airplane downloads available for my transmitter? Thanks Gary from Michigan, at The Flying Pilgrims RC Field ✈I have about 50 flights on this plane and it flys great. 😎 Well done video 👍
Bought one a couple of weeks. Set it all up but have a problem with the throttle propeller braking. Its so strong and sudden that it spins the fuselage around. If i hold the fus, it feels like it would spin without a tight grip. Any ideas anyone???? Help please
Truly a very poor video Successfully pairing an NXx transmitter with an AR637T receiver is no feat. Difficult-to-solve problems arise whenever you are forced to pair older equipment with new components. Same with me: I've been trying to pair a Conscendo Evolution with a DX6 transmitter (2. GEN, EU Version, unfortunately no forward programming) for several hours. Binding with plug (SAFE disabled) works. The binding process without a plug (SAFE active) also works, but toggeling with an assigned switch cannot be implemented as described in the instructions, although I have checked all the requirements several times. With the AR636 receivers in my Conscendos (s and Advanced) and Clipped Wings, this has always worked without any problems.
Just got mine in the mail yesterday, waiting on my tx16s and batteries to arrive, then the fun begins.
Thank you HH, Mark
Thank you!
A good discussion of CG would have been very useful. Important for a plane this light, and without some added velcro the battery can shift in this plane.
I've never had any issues leaving the prop on while binding aircraft to my transmitter. I've been flying for 13 years
How could you make a video as thorough as possible and not show how to program safe??
Would you please tell me what is the CG on this Conscendo Evo? Thanks!
Why not just unscrew the prop with the two screws through the hub, not mess with the blade screws/nuts. BTW: I love this plane on 4S!
You totally can.
Why not just leave it on the aircraft if you know exactly what you're doing you shouldn't have any problems
I just purchased the Conscendo Evoloution PNP. I have a NX6 6-Channel DSMX Transmitter and want to install and bind an AR6610T Telemetry Receiver in this plane. When I remove the bottom cover as per the instruction manual the space where I'm instructed to place the receiver has the throttle wire and connector coming from the ESC bound by a short metal tube. This tube makes it almost impossible to locate the receiver in this spot. Any suggesting on how to work around this. Also, the receiver comes with two six inch wires. I've not had these on any receivers I've used in the past. I'm guessing that they lead out the two holes in the back of the cover?
Frame 1:09 - - I am using the Specktrum DX6e - Are these airplane downloads available for my transmitter? Thanks Gary from Michigan, at The Flying Pilgrims RC Field ✈I have about 50 flights on this plane and it flys great. 😎 Well done video 👍
No wonder you don’t do vids anymore
Bought one a couple of weeks. Set it all up but have a problem with the throttle propeller braking. Its so strong and sudden that it spins the fuselage around. If i hold the fus, it feels like it would spin without a tight grip. Any ideas anyone???? Help please
What is the stand you are using? Thanks
I would love to know as well.
It's a Robart product. 👍
Where do I get that stand?
HH what the %#*} missing alot
Skipped so much, video sucks….
Truly a very poor video
Successfully pairing an NXx transmitter with an AR637T receiver is no feat. Difficult-to-solve problems arise whenever you are forced to pair older equipment with new components.
Same with me: I've been trying to pair a Conscendo Evolution with a DX6 transmitter (2. GEN, EU Version, unfortunately no forward programming) for several hours. Binding with plug (SAFE disabled) works. The binding process without a plug (SAFE active) also works, but toggeling with an assigned switch cannot be implemented as described in the instructions, although I have checked all the requirements several times.
With the AR636 receivers in my Conscendos (s and Advanced) and Clipped Wings, this has always worked without any problems.