How to Reprogram Garage Door Opener - Liftmaster Brand

A garage door opener can be reprogrammed in 30 seconds if you know the right sequence. Hopefully, this video will show you the correct sequence in less than 1 minute if your time. If you have a different brand, there may be a similar concept with slightly different buttons. I hope this helps. Since we are in real estate, we see these questions all the time. Please feel free to visit us anytime at www.teamibrahim.com.
Thanks
Marcus
‪@marlenproperties1895‬
‪@marcusibrahim‬

[@KimberlyHurd-sn9tk]

We bought a new one and was following the instructions for about 45 minutes! Then I found your video and set it in 45 seconds! 🎉 Thank you!!!!

[@teamibrahimre]

Amazing! I’m so glad!!!

[@theresaambrose8599]

Thank you!! I was playing with this darn thing for over an hour. Finally did UA-cam and found you and was able to do it in a matter of seconds. Video much appreciated.

[@teamibrahimre]

So glad to help!

[@user-gz5mx2nd5p]

Thanks. You saved us time and money of calling an electrician. Turned out the batteries ran out on our door opener next to garage. 😀. It works.

[@teamibrahimre]

Glad it helped

[@AliKhan-ek2xj]

Finally… I seen so many videos of how to change batteries. I’m pretty sure people know how to change batteries smh. Thank uou

[@teamibrahimre]

So glad to help!

[@lorraineshea]

Thank you!! I was doing it wrong until I found your video.

[@teamibrahimre]

So glad to help!

[@jacoblarson3299]

Just fixed mine bc of this! You are a legend!

[@teamibrahimre]

So glad to help!

[@kipokerfan]

Thank you! Like others in this common thread, played with that stupid thing for half an hour by looking at the printed instructions on the keypad and going to the LiftMaster website. None of which were accurate or solved it. Got it done in about 10 seconds watching your video!

[@teamibrahimre]

So glad to help!

[@mariading4932]

You are a genius! I watched so many UA-cam
Couldn’t get to work it work keypad des program car or both tried another one
So I watched your UTub it worked yeahhh👍👏👏👏👏😀❤️

[@teamibrahimre]

You are welcome! So glad to help!

[@franciscochevresfernandez1635]

Thank you, very helpful.😁😁

[@RAYBEIGY]

Thanks..it works for me the way you explain is seems easy.

[@teamibrahimre]

Great!

[@cohenCohen-mu5rx]

Thanks a ton. Fast and easy.

[@teamibrahimre]

Glad it helped!

[@sophieoshaughnessy9469]

Thanks Marcus!!

[@teamibrahimre]

My pleasure!!

[@DoubleUBee]

Thank you!

[@teamibrahimre]

So glad to help!

[@snowstorm504]

I don't know why LiftMaster/myQ doesn't just say to do this throughout all the manuals and apps 🙄
Thank you so much!

[@teamibrahimre]

Happy to help!

[@migdaliaflores2988]

Thank U Thank u so much ! I did it so easy 👍🥰

[@teamibrahimre]

Wonderful!

[@louisavila9450]

Great tutorial, reset the opener in less than a minute!

[@teamibrahimre]

Glad to help!

[@giovanniquintero7619]

Thank you

[@josephchavez6593]

Thanks should've done this before

[@teamibrahimre]

So glad to help!

[@danielthomas33]

thank you!!

[@teamibrahimre]

You're welcome!

[@ajs_wifi]

marcus, i owe u a beer asap

[@teamibrahimre]

So glad to help!

[@mehrdadrostamian4041]

Perfect.

[@teamibrahimre]

Glad it helped @Mehrdad!

[@KarenSOwens-sy4sd]

Amen

[@teamibrahimre]

Hallelujah

[@victoryusmc]

Thank you so much! I was struggling lmao

[@teamibrahimre]

So glad to help!

[@MrHumbleHimself20]

does the same work for the opener button on the wall inside the garage? I have a liftmaster too but when I press the opener on the wall inside, it wont open at all and it literally was working the night before

[@teamibrahimre]

Sorry @mrhumblehimself20 I’m not sure 🤷🏻‍♂️

[@Balumallisetty]

When do I press the remote..shm. What are you re programming

[@teamibrahimre]

garage door opener on the outside trim

[@timmiked]

The yellow learn button on the motor dosen't stay lit. Instead the smaller yellow button stays lit. Any help appreciated.

[@teamibrahimre]

I’m so sorry, I’m not sure. Anyone else have this happen to them?

[@insideoutsideupsidedown2218]

Yes, did that and now my opener light just blinks twice.

[@teamibrahimre]

Sorry, I'm not sure. Did you figure it out?

[@susie1043]

What if there isn't a number box? Its just a long switch 😢

[@teamibrahimre]

I’m sorry I don’t know 🤷🏻‍♂️

[@cristobalinafue]

I programmed a Universal garage door wireless keypad but the lift master I had before to close the garage door I just press the enter button and the door will close . With this one I have to put the code and press enter . Is this because is this brand ????

[@teamibrahimre]

Maybe. I think it’s safer to put the code before pressing enter anyway so I think that’s a good thing for you now. More security 👍🏼

[@dmeexpress9202]

My keypad doesn't have an enter button. How would I reset the code then?

[@teamibrahimre]

I’m not sure sorry

[@ronhali3164]

What if you moved in, and don't know the code ?

[@teamibrahimre]

I’m sorry, I don’t know how to do it without the original code

[@micheleabbott1787]

I have changed the batteries and I still can’t change the code. I don’t remember the last code. How do I change it

[@teamibrahimre]

I’m sorry I’m not sure how to do it without having the original code

[@Toy2Boy]

This guy has a channel here?

[@teamibrahimre]

Thanks for sharing @Mark Wagner

[@gipfeli]

Another 30 seconds for my mirror opener please? Same concept doesn’t work….

[@themarcusibrahim]

Yes! Soon! Mirror opener is on my list! I just haven't gotten around to it yet, haha.

[@teamibrahimre]

Unfortunately @domxiv, the mirror opener is much more complicated and is specific to your brand of car so I won’t be able to post a video of it. I recommend you read your car manual to find instructions - they may be cumbersome but you can do it!

[@sara1haider]

Hi,
How about two door garage door.

[@teamibrahimre]

Sorry, I don’t know yet 🤷🏻‍♂️

[@ahmadkhosravi7840]

Hi I did it didn't work

[@teamibrahimre]

sorry to hear that. Did you figure it out?

[@icookrats]

Model: 8165

[@teamibrahimre]

Sorry, I don't know that one. Did you figure it out?

[@karmaj32]

Thank you!

[@teamibrahimre]

So glad to help!

[@busolao4627]

Thank you!

[@teamibrahimre]

You're welcome!