Thanks for posting the video. A few months back I picked up an '84 'Vette and you helped me understand a big more about. Not many comments here but mine does express a lot of appreciation for your efforts.
Awesome,,i love my Chevies and swear by tbi injection....But i never realized they only go one way but it does make sense because i seen the one in my tb shooting more towards the back of the throttle body...i have a few 88-94 chevy gmc pickups...all i drive.
Yes they did; the '82 and '83 LU5 (CrossFire) came in F-bodies (Camaros and Firebirds.) There were only fourty 1983 Corvettes made, of which 39 were used in crash testing and demolished. The only existing one is at the Corvette Museum in Bowling Green, KY. (It has different wheels and an analog dash.)
Just found your channel and watch this video on Chevy TBI injectors my question is can I send you my whole TBI off of the engine do you rebuild the whole damn thing send it back and I just bolt it on and go??
does anyone know the size of the torx bolts that hold on the fuel rail and injectors? I was replacing one of the injectors and gaskets and wouldn't you know it ... one of the longer screws went flying !!!! just one bolt is holding up this easy fix
there was only 82 and 84 corvettes, no 83 were made - so you either saw an 82, which I have the CE 1982 or an 1984, those are the only years the same crossfire injection was done, in 1985 they changed it... I am having TBI issues, so I hope this man can help me...
I have an 88 Chevy that's running rough especially after it gets warm. The injectors are spraying a good cone, but I think maybe they aren't putting through enough gas. Is there an easy way to check them. Money is tight right now, so any input is greatly appreciated.
What are the little black plastic pieces with mesh screens in them and where do they go? I have a 1994 tbi I rebuilt and I couldnt find that part on my original tbi anywhere.
John Davis right on the side of the injector body. You pull the old ones out with tweezers and press the new ones in. The have little ledges on them that lock them in place.
John Davis they are filters. Not the main filters though. They've been in every throttle body rebuild/repair kit I've seen but the plastic cellophane wrapper around the box the rebuild kit comes in is full of static and it's loose around the parts box so they work they're way out and between the plastic abd bottom of box or stuck to the sides. Very easily lost! It's lame that they don't put them and the o-rings inside a little baggy in the kit. If you not bought the fuel pressure diaphragm kit they aren't in there but should be with the throttle body kit that comes with everything.
Sorry, I just reread your comment. I see your saying your injectors didn't have them. I bet they did but you didn't realize they are there or someone else rebuilt them prior and forgot them. They are extremely small! Like maybe 2 millimeters. They look like holes in the side or part of the manufacturing process of the part.
sciencemansandera Marvel mystery oil is amazing stuff !!! I use it in everything gasoline operated that I own. No clogged injectors in my vehicle nor oil sludge either .
I wished UA-cam was discovered 25 years ago when me and my father were repairing TBI of our 1989 chevy caprice LS
nice visual of the spray pattern and output volume
Thanks for posting the video. A few months back I picked up an '84 'Vette and you helped me understand a big more about. Not many comments here but mine does express a lot of appreciation for your efforts.
Awesome,,i love my Chevies and swear by tbi injection....But i never realized they only go one way but it does make sense because i seen the one in my tb shooting more towards the back of the throttle body...i have a few 88-94 chevy gmc pickups...all i drive.
Interesting demo thanks!
Yes they did; the '82 and '83 LU5 (CrossFire) came in F-bodies (Camaros and Firebirds.) There were only fourty 1983 Corvettes made, of which 39 were used in crash testing and demolished. The only existing one is at the Corvette Museum in Bowling Green, KY. (It has different wheels and an analog dash.)
TBI is the best system chevy ever had...super reliable and easy to diagnose and repair.
had mine for 20 years NEVER 1 problem with EVER!!!
Amen!! 🙏🫡
Great job on cleaning the fuel injector are you still working on the injectors?
@neosho52 he was talking about the 83 corvette crossfire
Just found your channel and watch this video on Chevy TBI injectors my question is can I send you my whole TBI off of the engine do you rebuild the whole damn thing send it back and I just bolt it on and go??
Do you all still offer this service
Will those injectors cause popping in the throttle body?
I need this done to my Cadillac this is my first car I've had and I'm trying to get everything set right it's a 84 so I know it needs it
I have two old injectors I just took off and I just bought new ones do you buy them?
Do you use gasoline in that spiffy spray/flow tester?
Do you still offer this service? where are you located?
awesome dude i own a 83 crossfire
does anyone know the size of the torx bolts that hold on the fuel rail and injectors? I was replacing one of the injectors and gaskets and wouldn't you know it ... one of the longer screws went flying !!!! just one bolt is holding up this easy fix
i have seen the 83 corvette in bowling green and it is a beautiful piece of art
there was only 82 and 84 corvettes, no 83 were made - so you either saw an 82, which I have the CE 1982 or an 1984, those are the only years the same crossfire injection was done, in 1985 they changed it... I am having TBI issues, so I hope this man can help me...
Is your business still running I got a 92 S10 that needs this service
@Ken7382 I own a 1983 Pontiac Trans Am with the LU5 305/ 5.0L Crossfire lnjection
Who are you and where do I send you mine to be redone?
Fucking bad ass demo.congrats
How can I get this done on mine?
I have an 88 Chevy that's running rough especially after it gets warm. The injectors are spraying a good cone, but I think maybe they aren't putting through enough gas. Is there an easy way to check them. Money is tight right now, so any input is greatly appreciated.
Ger Repair. u figure it out?
Do a full sea foam treatment and clean the injectors. See how it goes bud
are those same injector on 95 astri cpi system??
Do you still do the injector service for $75! 😅 I’ll send mine now if you do
Contact information I would like to get my injectors serviced
Where do I send mine for you to service it
What are the little black plastic pieces with mesh screens in them and where do they go? I have a 1994 tbi I rebuilt and I couldnt find that part on my original tbi anywhere.
John Davis right on the side of the injector body. You pull the old ones out with tweezers and press the new ones in. The have little ledges on them that lock them in place.
I didn't have any on mine. What are there purpose?
John Davis they are filters. Not the main filters though.
They've been in every throttle body rebuild/repair kit I've seen but the plastic cellophane wrapper around the box the rebuild kit comes in is full of static and it's loose around the parts box so they work they're way out and between the plastic abd bottom of box or stuck to the sides. Very easily lost! It's lame that they don't put them and the o-rings inside a little baggy in the kit. If you not bought the fuel pressure diaphragm kit they aren't in there but should be with the throttle body kit that comes with everything.
Sorry, I just reread your comment. I see your saying your injectors didn't have them. I bet they did but you didn't realize they are there or someone else rebuilt them prior and forgot them.
They are extremely small! Like maybe 2 millimeters. They look like holes in the side or part of the manufacturing process of the part.
How's yours running? What are they in?
Couldn't hear a word you said what where you cleaning them in ? Something hot?
Any news
What do you charge
I need this done, contact info please
can you repair/clean a marine TBI? we have a customer that has a mercruiser 454... one injector is spaying but the other is not...
fuelinjectorconnection.com/
I have a 1983 z28 rapid-fire with two throttle bodies does anybody out there know how to do those
@neosho52 dude I own a 1983 Pontiac Trans Am with the LU5 305/ 5.0L Crossfire lnjection
Where are located
If your car runs i found Marvel mystery oil does a heckuva good job in the gas tank of cleaning injectors
sciencemansandera Marvel mystery oil is amazing stuff !!! I use it in everything gasoline operated that I own. No clogged injectors in my vehicle nor oil sludge either .
Do these injecters have a model number ?
Had to shorten my comment or it wouldn't post. Damn youtube conspiring against me. lol
Anybody know how to seat the inje tors into the injector bowl
Lubricate the black rubber seals and seat them first in the bowl, then push the injectors in until they are seated.
How can I get this service done for mine?
Anybody looking to get there’s done, send them off to WitchHunter.com all their info is on their home page and they do fantastic jobs.
Phone #???
Cuanto cuesta
You know, the one saying "trust no one but me. Be my mInion. Call others libtards and such like I do. Call them sheeple, my minion."
Naw
turvina trasmision. 1994 b 8