INSTALLING SUSPENSION AGAIN - LOOKS GREAT DRIVES BETTER - PERFECT PRADO HEIGHT

Поділитися
Вставка
  • Опубліковано 12 гру 2024

КОМЕНТАРІ • 29

  • @bellaroccisano4156
    @bellaroccisano4156 3 роки тому +2

    I enjoy watching your videos Anthony!
    I have a grande 120 series i picked up this year for $10.5 with high K’s 290k on the clock. I had the suspension replaced with a 2inch kit about a month ago. Not as cruisy to drive but still pretty impressed.
    It’s a shame you don’t live in Brisbane, I need a good mechanic who knows his stuff.

  • @nidzdotnet76
    @nidzdotnet76 Рік тому +1

    Good video. Informative. I think if I worked there and i heared "badda bing" all week it would drive me nuts..

  • @mohamedalihebboul2214
    @mohamedalihebboul2214 3 роки тому +1

    Very nice and proper job, thanks for this video, a big Hi for all the team.

  • @terrysmith7740
    @terrysmith7740 3 роки тому

    This kind of instruction deserves a multipass

  • @artieclapham4148
    @artieclapham4148 3 роки тому

    Never had much luck with Dobinsons front springs. Where the first 2 coils overlap on the top of the spring arent ground flat enough. It cocks the spring and causes it to rub on the shock.

  • @PeterWatson-b5y
    @PeterWatson-b5y Рік тому +1

    Very informative video, just wondering what were the front and rear heights after the install?

  • @ExtremeWog
    @ExtremeWog 3 роки тому +4

    Do you know a place in Sydney to take my v6 to?

  • @yellow2172
    @yellow2172 3 роки тому +1

    at any point do you torque any nuts down or just old spec FT? and how long would it take you by yourself with the kit assembled? cheers

  • @ngatiklau6044
    @ngatiklau6044 3 роки тому +1

    Does the suspension change reduce the "boatyness" that comes stock?

  • @antonioarcellana7243
    @antonioarcellana7243 4 місяці тому

    Hi Anthony, is the Monotube ims give u softer rides than the twin tube?

  • @antonioarcellana7243
    @antonioarcellana7243 4 місяці тому

    hi Anthony, can we use the monotube ims as stock replacement without lift?

  • @ivanau9673
    @ivanau9673 3 роки тому

    Hey anthony can you do a video on a rear coil conversion for a prado w/ air suspension? Here in Canada we don't have the prado and many of the Lexus GX460s were sold with rear air & all had KDSS.

  • @theanythingchannel2239
    @theanythingchannel2239 Рік тому

    Can the top nut be removed while strut is still in the car? I only need to replace the top bush.

  • @Land_Cruiser_40
    @Land_Cruiser_40 3 роки тому

    Does the vehicle need a front wheel alignment after installation?
    Cheers

  • @aaronwillie5625
    @aaronwillie5625 Рік тому

    So you dont have to change your sway bar

  • @georgem579
    @georgem579 2 роки тому

    Do you loctite all nuts without a split pin?

  • @bbqcrew1
    @bbqcrew1 3 роки тому

    Is that a crack in the left-hand guard?

  • @dannybanganay5265
    @dannybanganay5265 3 роки тому

    what brand is your ball joint extractor?

  • @roygacus4523
    @roygacus4523 3 роки тому

    Nice video mate. How much for the DIY 2 inch lift kit as per you video? Can you please send me a quote prado 150 2015.

    • @Fourby4Diesel
      @Fourby4Diesel  3 роки тому

      Please keep watching videos and you’ll find my contact number to send me a text message on Mondays

  • @philbond9816
    @philbond9816 3 роки тому

    What Dobinsons kit would you suggest to increase GVM for a 150 Prado. Looking at 500kg increase in GVM with constant 100kg front and 300-400kg rear, will do a lot of towing, 800kg to 2200kg loads.

    • @Fourby4Diesel
      @Fourby4Diesel  3 роки тому

      I’m pretty sure I did some videos talking about GVM upgrade and I’ll do another one soon don’t waste your time is the short answer a few more words there’s no such thing

    • @philbond9816
      @philbond9816 3 роки тому

      @@Fourby4Diesel So you are saying a GVM upgrade is a waste of money? I will be fitting a storage unit, hopefully one of yours, Dual batteries and Bullbar towbar roof rack awning etc I dont want to go over GVM. Not overly worried about tow weights GCM etc as I don't want to over stress the Prado and tow a mountain. Will be doing 4WDing so need a lift anyway. Watched the GVM video BTW.

    • @philbond9816
      @philbond9816 3 роки тому

      @@Fourby4Diesel So would a 40mm lift front 45mm rear lift with stiffer springs be better. I have approximated vehicle weight with all accessories and load to 2940KG which is close to GVM at 2990KG.

  • @JGstunts22
    @JGstunts22 3 роки тому +1

    Why not tell us the height or part number?

    • @Fourby4Diesel
      @Fourby4Diesel  3 роки тому

      One part number doesn’t give us that height depends on the weight and there’s lots of different part numbers more information in other videos why not watch them

  • @matingarner4714
    @matingarner4714 3 роки тому

    Why not paint the top of shock 🤣

  • @michaelterechow1859
    @michaelterechow1859 3 роки тому

    16:10 🤣

  • @aussieadventurestimetoplay
    @aussieadventurestimetoplay 3 роки тому

    Ratchet spanner