Good Works Tractor is evolving the 100+ year old farm implement industry. We all love your new "Adapt-Attach" plate system. It will became the absolute industry standard in 2 decades. Since I just helped with naming it in this comment, I will remind you when I order mine :-) Bravo my friend.
Idea for the top grapple lid(s), make the hinges where you add 2 more hinge points on the outside so you could share the inner hinges and then it could be adjusted either 1 lid in the center or 2 on the outside. I have the add-a-thumb DIY kit priced out to do that on my silage and standard buckets and be able to switch the lids around depending on task, 1 lid for large heavier stuff and 2 lids for leaves/branches etc 👌
Products in video: Add-A-Wrecker Stump Bucket: tinyurl.com/bdza7r38 VersaForks: tinyurl.com/3kunzat8 IronCraft Power Sweeper: tinyurl.com/yc3yc82f Reist R25PD Stump Grinder: tinyurl.com/y4a5buww Extra Wide Skid Runners: tinyurl.com/472j7a6e Fast Cat I Quick Hitch: tinyurl.com/4ttth9er VersaBracket: tinyurl.com/uu2tndsy Trash Can Mover: tinyurl.com/47nkcd4n
The trash can mover is awesome. My driveway is only about 350' but hey, that's 700' down and back! Very cool attachments, innovative ideas. My list of must haves is growing. Again!! 😅
I think the smaller top jaw is a good idea. It's the lower jaw that really does the carrying, and with the top jaw trimmed to maybe 30-40% of the size, you save weight and retain more lifting capacity - nice!
7:25 dude that's awesome! I have a 2" receiver but it can't do weights. That's a good idea. Honestly the entire versa frame is awesome in concept. If I didn't already have 2k pound forks I'd go your route, and still might in the future for just other options. Thanks for thinking beyond pure profit and doing stuff people ask for that don't exist.
Love the idea of the Versa bracket Have you seen those pole saw attachments? They attach to the front loader bucket, and allow you to trim branches upto around 15 feet off the ground. Just an idea.
It sounds like you are trying to compete with Artillan and if that's the case you need to make it so you can more clamp. But I do have to say the option of using it off the 3 point is nice
Nice looking. What would be amazing is that top arm grapple, make so it can be slid from side to side and used, not just in the middle. Sometimes you just can't get by going in the middle.
Great new products Courtney. I was wondering when you were going to make a rack extension for the versa forks. I’m kind of holding off on the versa forks waiting on the rack extension. I definitely want the versa forks, stump wrecker and grapple. I am hoping for a rack extension also.hint, hint. I enjoy your videos and I enjoyed purchasing from you in the past and I’m looking forward to future purchases. Thanks
How about a round trash can mover for the trash cans that don't have that metal bar on them! It could be either like the double grass/leaf catcher can holder on the back of the lawn/garden tractors, or it could be an attachment that you add to your front loader bucket to keep the trash cans from falling or a platform to add to the pallet forks that you could either bungee cord the thrash cans or latch a metal bar across the thrash cans to keep them from falling. Just a couple of ideas.
Can we get the measurements of how far down the hole is on the stump wrecker to see if it will fit what I currently have. I have Titan forks with a 2-inch receiver.
quick hitch don't fit some equipment, what you need is an adjustable so it will fit different wide equipment hookup, i do not think this is so hard to figure. The weight of equipment doesn't effect width, as a matter of fact I could design it for you.
Thanks for stopping by. Check out all these tools at www.goodworkstractors.com
Good Works Tractor is evolving the 100+ year old farm implement industry. We all love your new "Adapt-Attach" plate system. It will became the absolute industry standard in 2 decades. Since I just helped with naming it in this comment, I will remind you when I order mine :-) Bravo my friend.
Idea for the top grapple lid(s), make the hinges where you add 2 more hinge points on the outside so you could share the inner hinges and then it could be adjusted either 1 lid in the center or 2 on the outside. I have the add-a-thumb DIY kit priced out to do that on my silage and standard buckets and be able to switch the lids around depending on task, 1 lid for large heavier stuff and 2 lids for leaves/branches etc 👌
Morning. Got the forks this summer love it. Can't wait for the grapple. God bless.
Products in video:
Add-A-Wrecker Stump Bucket: tinyurl.com/bdza7r38
VersaForks: tinyurl.com/3kunzat8
IronCraft Power Sweeper: tinyurl.com/yc3yc82f
Reist R25PD Stump Grinder: tinyurl.com/y4a5buww
Extra Wide Skid Runners: tinyurl.com/472j7a6e
Fast Cat I Quick Hitch: tinyurl.com/4ttth9er
VersaBracket: tinyurl.com/uu2tndsy
Trash Can Mover: tinyurl.com/47nkcd4n
The trash can mover is awesome. My driveway is only about 350' but hey, that's 700' down and back! Very cool attachments, innovative ideas.
My list of must haves is growing. Again!! 😅
In expensive tip/idea….. I married my trash can mover…..😂😂😂. She was pretty expensive compared to these shown….😂😂😂
I think the smaller top jaw is a good idea. It's the lower jaw that really does the carrying, and with the top jaw trimmed to maybe 30-40% of the size, you save weight and retain more lifting capacity - nice!
Great video! I love seeing new and improved designs!
7:25 dude that's awesome! I have a 2" receiver but it can't do weights. That's a good idea. Honestly the entire versa frame is awesome in concept. If I didn't already have 2k pound forks I'd go your route, and still might in the future for just other options. Thanks for thinking beyond pure profit and doing stuff people ask for that don't exist.
Totally genius thinking . You keep coming up with fantastic ideas to make tractors more useful
I wish this would have been out before I bought my pallet fork attachment.
GWT, the Swiss Army Knife of tractor attachments! 🚜
Love the idea of the Versa bracket
Have you seen those pole saw attachments? They attach to the front loader bucket, and allow you to trim branches upto around 15 feet off the ground. Just an idea.
ua-cam.com/video/OXiQ-ypMyMw/v-deo.htmlsi=nLxH1Ylko948s8gj
It sounds like you are trying to compete with Artillan and if that's the case you need to make it so you can more clamp. But I do have to say the option of using it off the 3 point is nice
Happy Thanksgiving! You have came along way since selling your first John Deere tractor 🚜🎉
Love the new products. Great to see the new stuff for the versa frame!
Nice looking. What would be amazing is that top arm grapple, make so it can be slid from side to side and used, not just in the middle. Sometimes you just can't get by going in the middle.
If you go forward with the weight extension/receiver arm, you should add a gusset on the back side also imo.
How about a riper for the stump bucket?
The GWT Mini Add-A-Wrecker will be a game changer, bar none!
There is SO much infor to listen to...great information and content!
Looks like good progress! Good video!
Great new products Courtney. I was wondering when you were going to make a rack extension for the versa forks. I’m kind of holding off on the versa forks waiting on the rack extension. I definitely want the versa forks, stump wrecker and grapple. I am hoping for a rack extension also.hint, hint. I enjoy your videos and I enjoyed purchasing from you in the past and I’m looking forward to future purchases. Thanks
Great new products, and that trash can hauler is genius!
How about a round trash can mover for the trash cans that don't have that metal bar on them! It could be either like the double grass/leaf catcher can holder on the back of the lawn/garden tractors, or it could be an attachment that you add to your front loader bucket to keep the trash cans from falling or a platform to add to the pallet forks that you could either bungee cord the thrash cans or latch a metal bar across the thrash cans to keep them from falling.
Just a couple of ideas.
Love the innovation. LiKe Oscar Wilde says: Imitation is the greatest form of flattery.
First time I've heard you mention TYM. 2515 owner here.
Can we get the measurements of how far down the hole is on the stump wrecker to see if it will fit what I currently have. I have Titan forks with a 2-inch receiver.
Can you order just the pins for the 3 point quick attach?
Looks like a bunch of great products coming out.
It would be cool if you could just have two top jaws for handling small branches and whatnot.
heavy hitch has a lot of similar stuff
Hey i have a kubota bx2680 tractor and would like to know if that grapple would fit on it. Thanks
quick hitch don't fit some equipment, what you need is an adjustable so it will fit different wide equipment hookup, i do not think this is so hard to figure. The weight of equipment doesn't effect width, as a matter of fact I could design it for you.
Will Trump's tarrif war kill John Deere?
Yeagh you are ripping off Everything Attachments equipment but just not as tough!😂
You know everything attachments is out of business
He's probably not going to steal your money though, so there's that...