How to: Remove Headliner in Toyota Pickup Truck Hilux + 4Runner
Вставка
- Опубліковано 15 вер 2024
- Today I'll show how to remove the interior vinyl headliner found in 84-88 Toyota Trucks and 84-89 Toyota 4Runners.
Removing the rear glass window: • How to Remove Toyota T...
Removing the entire dash and steering wheel: • How To Remove Toyota P...
Taking apart the doors to convert to vent windows: • How to: Toyota Pickup/...
Here are some other Toyota videos you may find helpful:
Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
22r Compression Test: • How to: Compression Te...
Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
The Vent Window Conversion: • How to: Toyota Pickup/...
Remove Door Panel: • How to: Remove Toyota ...
LED Headlight Conversion: • How to: Install Toyota...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
Remove & Install B-Pillar Trim Covers: • Toyota Pickup/4Runner ...
Toyota Pickup Fiberglass Bed Review: • Toyota Pickup Truck Fi...
I don't have Patreon or ask for donations but you can support the channel with some rad Yota gear from my store: 6thgeargarage.c...
Follow Us:
Instagram: 6th_gear
6thGearGarage
I am extremely happy to see this tutorial on disassembling the headliner from the cab, and the other ones like it. Nobody else is demonstrating this, and it's needed and appreciated. Just need to find myself a replacement headliner now.
My 1996 Tacoma is almost the same process. glued under the seals and metal rods stopping it from drooping. Thanks for this demo!
I really appreciate ur work.
Just the video I needed: Thank you!
Thanks for posting this.
Thanks for sharing your video great job explaining things.
I learned the hard way about toyota pickup headliners once you remove them they are virtually impossible to reinstall.
Yeah it's a PITA to install... lining up the rods in the holes and then gluing all those seams takes a lot of patience.
Can you purchase new vinyl liner kit
Thank you
Any idea what the part number is of the gray push clip is? I have damaged a few pulling them out.
I’m not sure what it is
I see you have a 1pc front bumper. Are you selling the brackets? My truck originally has a 3pc bumper. When I bought the 1pc bumper I didn't realize the bumper holes wouldn't match up with the brackets. I'm having a hard time finding the correct brackets
I'll have to see how rusty they are. Also I think Toyota changed the design of the brackets, in 86 or 87 maybe?
Hopefully they are in good enough shape to use. Are you located in Washington State?
@@ericfayton5865 I'm in Ohio
excellent videos, thank you!
Is that bench seat original for that year or is it from a different truck? I’m looking for one with the flip down center console like that but can’t find one.
I believe it was original to the truck. it was a 87 bare bones 2wd 22r but the bench seat was nice.
I have an aprox 8x8 section right around the driver grab handle where the headliner is sagging a bit. Could I just pull down the head liner there a bit and spray some adhesive and have it stick? Or am I better leaving it be?
It's held up by the tension where it attaches to the metal rods. So I wonder if it's tearing away from the rod? It's not really glued to any surface besides the very edge around the door and rear window/windshield openings, so there's nowhere for it to adhere to except for around the edges.
@@6thGearGarage thank you for replying so I'll just leave it be for now
Would you sell the rear window setup?
Gerardo Martinez yeah but shipping is going to be killer. Also I need to find a huge box for it.
"I like mouse poop falling on my head”. -Nobody.
Very interesting. Good video. Appreciate it. You selling any parts by chance? 1986 pickup that is
J C most of my rusty 1986 has been sold or scrapped but I have a few parts left... What are you looking for?
@@6thGearGarage I am looking for the clips that hold the registers/vents into the dash.
@@Samson-EC The 4 metal clips on each vent?
Yep, I am missing three on a vent. Tuff to find just the clips
The headliner is already out on our truck, do we need to replace the insulation or am I good just getting a new headliner
Edit: the insulation is out as well
The insulation is there to help reduce road noise and maybe block some heat through the roof. You could leave it out.
What is the Name of the Special tool you are using to Remove the Plastic A Pillars?
Thank you
I believe they're called "panel poppers"
I got a nice trim removal kit that has them, used it in this video: ua-cam.com/video/6yAXzWO_i6s/v-deo.html The kit was about $20 on amazon and worth every penny.
@@6thGearGarage There is No use of you using a A Pillar tool in the Video!
You are removing a door panel!
You must Not Know what the Plastic A Pillars!!!
@@6thGearGarage The proper tool Looks like Scissors..
I just dont know the name of them.
John M that video just shows the whole kit that contains the panel poppers. I only removed the door panel in that video. I removed the a pillar in this video. Hope that clears up any confusion
I think you should just restore the cab so we can get some instruction on repairing rusted areas and making patch panels then installing them
This cab is pretty far gone. I might fix up another one though.
Excellent video as always! Thumbs up #1
Does this also work for the 4Runner?
Yes it does, except the the back edge will be different because the truck has a window there and the 4runner has a trim piece. The rest is identical.
I have the moon roof what am I to expect when removing mine??
I didn't quite see the windshield edge detail, but sounds like it's wrapped just as the rear window is. Right?
J. Thomas yes except you do not need to remove the glass, just the rubber trim strip along the top of the inside of the windshield.
Now how do I put it back
Sorry don't have a video of that, but it is the opposite order of steps to remove it.
How much do want for the front seats in that truck if you still got it?
I do still have these... are you in Ohio? I have no way to ship them.
@@6thGearGarage sorry I am from Ohio but moved to Louisiana been here for 30 years
@@6thGearGarage I really would like to get them but 1600 Miles is a long hike
@@6thGearGarage find out how much it would cost to ship them a I will pay for it.
@@rickwatson7423 If I found a large enough box, it would be gigantic and heavy, cost a fortune to ship.
hey can u do a video how to replace auto vinyl
What part of the vehicle would you like to see?
@@6thGearGarage how to replace carpet in your 4 runner
@@lukerobinson8843 I hope I own a first gen 4runner someday so I can show you how!
@@6thGearGarage yes
@@6thGearGarage yes bc im him trouble
Is there any place that sells OEM liner?
Rudolf Dubrovszky not that I know of.
I wonder if anyone has a grey single cab headliner they want to sell, mouse turds and all?
Would this be the same on a second gen?
I don't know, as I've only removed them on 84-88 trucks. If it has those 3 rods going across, then I bet it is probably the same.