Removing Stuck Injectors Of Mercedes CDI Engines.

Поділитися
Вставка
  • Опубліковано 5 лют 2025

КОМЕНТАРІ • 29

  • @indigo9568
    @indigo9568 8 місяців тому +2

    Be prepared to replace your rocker cover also 😂 mine was so stuck, I was using this tool, and the injector came out eventually with some serious pressure, upon celebrating, noticed the rocker cover had cracked in the process, but my engine did have severe black death! I have 0 mechanics experience but with the help ofthis video and many like it Ive been able to strip all the injectors out, out a new aluminium rocker cover on and 4 reconditioned injectors back in, runs a dream now 👌🏻 I was previously getting quite bad CO poisoning and now it's scent free

  • @marcinn6312
    @marcinn6312 2 роки тому +2

    Nice alternative to a slidehammer. Would be even nice if it had a thread in the tellow collar so you could use it with a power/air tool instead of a wrench.

  • @ronrossi8042
    @ronrossi8042 2 роки тому +4

    That was well demonstrated , my van Black Death was so bad the mechanic has spend 3 days on it and was only able to remove 1 , the other 3 won’t budge.

    • @indigo9568
      @indigo9568 8 місяців тому

      My mechanic said this, I looked myself and they hadn't tried, so now I'm doing them myself with this video 👌🏻😂

  • @Jessersadler
    @Jessersadler Місяць тому

    no damage to valve cover?

  • @libran58
    @libran58 Рік тому

    Thanks, the small part was a mystery to me until now.

    • @libran58
      @libran58 Рік тому

      Oh yes, watch out for the tiny spring everyone!!!! Inside the cap.

  • @lll-wf4lp
    @lll-wf4lp 3 місяці тому

    what tool is it please, brand reference?

  • @davidchadderton5904
    @davidchadderton5904 2 роки тому +2

    My local garage needs to see this. Told them I’d seen it done on UA-cam. My car has been stuck in their workshop bay for 3 weeks right now. Into fourth week tomorrow.

    • @tasoulis4426
      @tasoulis4426 2 роки тому +2

      Change work shop bro

    • @davidchadderton5904
      @davidchadderton5904 2 роки тому

      @@tasoulis4426 will have to pull my car out of their car yard with a breakdown truck.

  • @acrimonie29
    @acrimonie29 Рік тому

    quel produit utilisé pour nettoyer svp?

  • @njalonje3931
    @njalonje3931 2 роки тому

    How do you remove the 3 wing part from the injector?

  • @kimandersen8589
    @kimandersen8589 Рік тому

    where i work we just remove bolt that hold the injector. then we start the engine and wait for the puf

    • @johnswimcat
      @johnswimcat Рік тому

      I'd suggest just loosening the bolt a bit, otherwise when the injector pops out it will bend the fuel pipe. Once the pipe is bent it can be impossible to get it to seal again. Also this method doesn't always pop an injector out.

  • @jeremywillemse4844
    @jeremywillemse4844 2 роки тому

    How to calibrate the injectors when you put it back together

  • @leodavis7524
    @leodavis7524 2 роки тому

    What model Mercedes was that..

  • @jasonputtock4428
    @jasonputtock4428 2 роки тому

    Just got done doing mine. 1 came out easily by hand the others needed this tool and VICE GRIPS. Now to spend 500zl on regeneration. god dam diesels. Well, I got totally boned. 3 bolts snapped of in the head holding down these injectors. Mega disaster.

    • @libran58
      @libran58 Рік тому

      Tap for M8 or M10, it works.

  • @N-e.o
    @N-e.o Рік тому

    What is that mud doing there, that looks 🤢

    • @nikpsm
      @nikpsm  Рік тому

      This is the result of long time leaking injectors

  • @demirjaman122
    @demirjaman122 Рік тому

    Da asta se mișcă după iasă măi ușor

  • @arts6535
    @arts6535 2 роки тому

    Was this car in Ukraine war ???
    Burned and tosted?

    • @nikpsm
      @nikpsm  2 роки тому

      🙂This is the result of long time leaking injectors

    • @sergeiartemonov6289
      @sergeiartemonov6289 Рік тому +1

      Do you realy think that your joke is funny?

    • @libran58
      @libran58 Рік тому

      Just normal diesel stuff