Purchased this at Walmart today already assembled. It's amazing! I noticed the chain guard was folded into the chain and was grinding the chain away. So, I had to pry and bend the chain guard away alittle. Works blissfully! I'm so used to the 10 speed mountain bikes I always had, This one is a new one for me, Especially for it being a cruiser.
Why did you have to wait two years for this "Hyper" ? Was it special order or something ? I bought me the seven speed model. I like mine alot . The only thing that bothered me was that the front single sprocket comes with a 52 teeth crank gear which still makes it a bit hard to go up steeper inclines even in first gear. So l did some research and l will be changing the front gear to a smaller gear count. I'm going with a 32 teeth gear count just because of the steeper hill's l live around. Otherwise if there were no hill's at all l still would change it to maybe a 40 T or 42 T Just because first gear is still kind of hard to pedal when it comes new and stock from factory. Anyway's l can't wait to put the new gear up front and see how it works out . Ride safe my fellow bike riders !😎
There is a large C clip that holds the sprocket and freewheel hub together. If you push the C clip back into the groove it will work again. Problem is keeping thar C clip in the groove. Pops out every once in a while. Might try cleaning it up and little super glue to hold it.
Nice bike, but the only thing that detracts me from buying it are the coaster brakes. I’ve always used handle brakes since you can brake as much as you like, but coaster brake are on or off. I’d like to know what you think about them
The seat post is made out of soft metal I guess to save cost so it will bend u need to get a hardened steel seat post and don’t ever grease the seat post use a anti seize paste as for it too not slide up or down easily with out over tighten the seat post clamp amazon or eBay the size is etched on the seat post in mm
Purchased this at Walmart today already assembled. It's amazing! I noticed the chain guard was folded into the chain and was grinding the chain away. So, I had to pry and bend the chain guard away alittle. Works blissfully! I'm so used to the 10 speed mountain bikes I always had, This one is a new one for me, Especially for it being a cruiser.
I got this bike today,I just love it!!! 🤗👌😉
I ordered one recently should be here in a couple of days. The bike looks amazing really nice bike i can't wait till it gets here.
You get it?
That seat angle is giving my junk nightmares
He likes riding it rough 😂
Saw this at my local Walmart and just had to have it. Adding some 9 inch bars and set Duro white walls to give it some extra old school.
I am gonna put some white walls on this year as well
Add a 80cc gas motor kit and you're laughing.
Where did thes bike made
My favorite bicycle
Mine too. Just love it.
Nice bike I'm getting the same one tody
I love it. How you liking it?
@@Shelby85 great bike sturdy and reliable but has your crank set come loose cause mine did the first day
No. I never had a problem with that.
@@Shelby85 oh i geuss it's all on the employee that puts it together
Could be. I had mine come in a box so I put it together my self.
It says aluminum frame but in 2020 I don't think they're aluminum anymore. Only steel .
Why did you have to wait two years for this "Hyper" ? Was it special order or something ?
I bought me the seven speed model. I like mine alot . The only thing that bothered me was that the front single sprocket comes with a 52 teeth crank gear which still makes it a bit hard to go up steeper inclines even in first gear. So l did some research and l will be changing the front gear to a smaller gear count.
I'm going with a 32 teeth gear count just because of the steeper hill's l live around. Otherwise if there were no hill's at all l still would change it to maybe a 40 T or 42 T
Just because first gear is still kind of hard to pedal when it comes new and stock from factory. Anyway's l can't wait to put the new gear up front and see how it works out . Ride safe my fellow bike riders !😎
Just waited for a killer deal.
I recently bought it and I'm having a problem with my rear sprocket. The wheel spins freely but the bike doesn't move forward.
Hey i have the same problem. Did you find a solution?
There is a large C clip that holds the sprocket and freewheel hub together. If you push the C clip back into the groove it will work again. Problem is keeping thar C clip in the groove. Pops out every once in a while. Might try cleaning it up and little super glue to hold it.
Thanks to you I ordered one today and I can't wait to enjoy it from spring to summer all the way to the first snowfall. 🫡👍
You get it?
Hey does it have a place to install a water bottle holder please respond
No. It really doesn't.
Nice bike, but the only thing that detracts me from buying it are the coaster brakes. I’ve always used handle brakes since you can brake as much as you like, but coaster brake are on or off. I’d like to know what you think about them
I love them.
You can add a front caliper brake pretty cheap.
I like the clasic of the coster break.
nice bike...how do you like it? you still ride it?
I love it.
Nice mine is like that but green
Nice
How did you guys peel of the tape? I’m having trouble getting it off...im talking about the tape on the cycle frame
They just came off after a hot wash.
I got this bike for an Xmas present. I love it but seat keeps leaning down when I sit on it. How can I adjust the seat to not move? Please help
The seat post is made out of soft metal I guess to save cost so it will bend u need to get a hardened steel seat post and don’t ever grease the seat post use a anti seize paste as for it too not slide up or down easily with out over tighten the seat post clamp amazon or eBay the size is etched on the seat post in mm
Are you still riding the bike? How has it held up over the past year?
Yes. Still a really good ride. Loving it.
Send express rush dilevery asap
Lol
a question how long does the bike take to arrive when ordering
Mine took two days.
I got a problem my bottom brackets loose I'm trying to buy the tool but dont know what's it's called could you please tell me what it is
Bike Crank Extractor/Arm Remover Bottom Bracket Remover,16mm Spanner/Wrench
@@Shelby85 thanks
How did you get the Gold plated Logos? I can only find it in silver!
I don't know. This was a gift. I think they just got it in store at Walmart.
Please tell me how you adjust the seat that was loose?
I just keep tightening it and it stayed.
Try taking the bolt out and using lock tight.
Howard much did you payed for that?
like $190
Today