I've been a subscriber for as long as I can remember. I've purchased many nano and micro models because of your reviews. Of course, I modified them into completely different models but that's just me. That said, in my humble opinion, you're STILL the best nano/micro drone Reviewer on UA-cam! Hands down!
Nick burns uses a special military grade paint in his house that conduct the fpv signal. Nobody else has this video quality and even Carl Zero is jealous.
Hey Nick the motor wire tape works great with very little added weight. You just put it long wise down the battery, if you need 1 layer just cut the tape so it ends on the thin part of the battery and it'll help keep those batteries in!
Your Lookin Healthy My Man, Thanks For All The Work You Do Pumpin This Whoop Tastic Info Out For Us. Merry Christmas & Happy New Years To All....... PEACE ✌ ✌
Hi Nick, Great video and review of the mobula 7 HD, I wish I had your reaction skills to fly inside, but it sure flys nice outside as well. Thanks for the video and info on this quad. 😅
I love happymodel and most of my drones are from them but damn, they gotta step up their stickergame. Can't believe that even 6 years later, they still look like this
Love the camera, but the stock canopy should be replaced asap. It shifts as you see and it has 0 protection on top. There are a few decent options on Thingiverse to 3d print
I have wanted to, but not gone as far as making arrangements. I have a hard time pulling myself away from family and home. Going to a race is on my "bucket" list.
Hello Nick, take the betafpv Micro Canopy Lite, the Lux Cam fits in perfectly, is protected and you can adjust the angle. The 75 Air Frame from Betafpv is also great, Betafpv Lava fits perfectly with it. And take the Gamfan 40mm 2 blade props, it flies better and above all longer 🙂
12:57 in yes Nick I have the same problem breaking them there in the front. Thanks Nick great review! I already ordered one via banggood last week. Can't wait to get it here is flying great finally a mob7 hdzero that can compete with analog like flying performance 👍 awesome!!! Thanks Hdzero and Happymodel for that aio 🙏👍🫶😁
Nick, with those loose batteries run a small rubber band around one end then give it a twist and go around the other end, that might provide you a little cushion as far as breaking the battery holder to boot. 🤣
after 5 battery packs lost focus on my LUX camera on mobula6 after small crash in house. Adiitional protection is must have. there is stl's on thingsverse with different angles and a bit more protection
@@DukeEvolution Print, order, or get a focus chart from a camera store. Learn to use it. This is an integral part of FPV. I set focus at 2.5-3 meters, but I have a few friends that use 1.5-2 meters for their whoops. It's personal preference. It will always give you a better image as most cameras are not focused, or weirdly focused at the factory.
@@DukeEvolution I took the camera out of the canopy and then unscrewed the jam nut (it has the notches on it, take it easy on the threads and don't man handle it). Once the jam nut is loosened you can screw the lens itself in and out while looking through your goggles until it is clear as it can be. Focus does change with distance so use your judgment for what looks best to you. Once you have it, tighten the jam nut back down and install the camera back in the canopy. It might take a little tweaking because the lens is easy to move when tightening the jam nut.
Great review as usual! To solve the problem of the usb sticking out from the frame too close to the battery, would it help rotating the fc on the yaw axis by 90 degs on the same frame?
@NickBurnsFPV this change of parameter in betaflight is easy, with the configurator and usb drivers working. Alternatively, I would use longer screws (hard to find) and some spacers to lift the fc.
I would never use a 75mm on 1s, so for 75mm whoop, I would compare the lite bundle with eco board + lux camera: I feel like we loose both on weight and image quality.
Just figure out the issue and see if you have some flexibility. If it's noise, you can do it away from the people that get bothered. I got some of those. Also... My security team won't let me fly analog, except for 3 areas that basically have glass walls to begin with. But I can fly other video systems basically everywhere else.
@@ebarnard23 not natively. I believe only the only dji goggles that have inputs is the original dji goggles v1 and v2, not the goggles 2, not the goggles 3 etc.
@@NickBurnsFPV it sounds to my ears anyway, like it’s using more throttle on quick change of direction. As if the build is a touch too heavy. Might be wrong.
Hi i have the elrs boxer crush and im looking for a drone and goggles do you have any suggestions? (Tinywhoop to practice indoors) ps I have a budget of 1k usd
@@domnicdrakon I would presume no prop protection? What are you looking at for quads? Anything that has caught your eye? What video system? DJI, Walksnail, HDzero, analog with or without gopro.
@ I’ve only had one break on a 75 whoop that was pretty heavy. Had a whoop lite kit on it. 65 never seen that. Makes sense tho on the wider battery since the bar in between is longer and more fragile.
@@Robocopter_fpv That's a good AUW. That and below is very good. Sorry I wasn't clear enough. Should have emphasized that I am not talking about all up weight.
@NickBurnsFPV According to other reviews I've seen, in general, but worsening as you go up in mah as expected. Could it be the tune? Or is this more the limit of what 1S can do...
Heavier batteries points out that you are still categorized as a NEWBIE TO FPV! Lolol 😉 It's not about flying an ultra light whoop with heavy batteries! It's about KEEPING an ultra light whoop, ultra light with lightweight batteries! It defeats the purpose and defeats the performance of these great ultra light whoops to use heavy batteries! Buy more batteries! Change often! It's all about power to weight ratio! Keep it light, silly Newbie! Lolol Happy holidays Bro! $ave big money... Buy the BetaFPV AIR65 or AIR75 for retail $95 and don't get ripped off by buying the HDZero goggles for over $700 with the 4 antennas and a battery you'll still need for them after you spend $600 on those worst value in the FPV goggles! 💯👎 Air65 has a super clear camera and a 400mw VTX so Nick flies his entire house crystal clear! Go search for that video he did a while back and watch how clear it is! Only not quite as sharp as the HDZero version but still amazing for an analog whoop!... And I just $aved you hundred of bucks! Analog for the win! 🎊🥳🎁🧑🎄😁🤘
@@zicada7661 Its typical that as the battery gets bigger and heavier there are diminishing returns on flight time and agility. Weight in nearly any way will have this impact.
I really want to jump into HDzero and other systems as I feel like I would learn so much more on the tech side BUT I’ve already got the DJI goggles and remote 3 and the rumours of the 04lite seems like it could make hdzero kinda redundant
No chance you will have 65mm at 20g with DJI O4, 75mm 1S bellow 40g is also very unlikely. So basically, no indoor whoop from DJI unless you live in warehouse or have crazy skills... I also own Goggles 3 but bought Hdzero for tinywhoops and possible racing.
I've been a subscriber for as long as I can remember. I've purchased many nano and micro models because of your reviews. Of course, I modified them into completely different models but that's just me. That said, in my humble opinion, you're STILL the best nano/micro drone Reviewer on UA-cam! Hands down!
Nick burns uses a special military grade paint in his house that conduct the fpv signal. Nobody else has this video quality and even Carl Zero is jealous.
lol, 100%
@@NickBurnsFPV Hey Nick, is your house use drywall or something, because your signal is always excellent, mine already graining going to the next room
HDZero at 200 MW is pretty darn good for a whoop.
@@ifrashable Yes, its classic US 1980s build of drywall and wood studs. the front exterior has brick block and the siding is some concrete blend.
@@ifrashableGo analog, has better range than HDZEro
Great stuff Nick, I got mine today, man these AIO5 whoops are soooo good! 😊
Awesome review as always Nick. Nice one
Hey Nick the motor wire tape works great with very little added weight. You just put it long wise down the battery, if you need 1 layer just cut the tape so it ends on the thin part of the battery and it'll help keep those batteries in!
Finally you review it!
It takes me a while. I don't review based on an afternoon or day of flights. Generally, it take two weeks or more.
Fantastic flying and review, Nick! 😃
Merry Christmas!
Stay safe there with your family! 🖖😊
75mm BABY
@@MoeFPV 🎉🥳
Your Lookin Healthy My Man, Thanks For All The Work You Do Pumpin This Whoop Tastic Info Out For Us. Merry Christmas & Happy New Years To All....... PEACE ✌ ✌
Hi Nick, Great video and review of the mobula 7 HD, I wish I had your reaction skills to fly inside, but it sure flys nice outside as well. Thanks for the video and info on this quad. 😅
I love happymodel and most of my drones are from them but damn, they gotta step up their stickergame. Can't believe that even 6 years later, they still look like this
need to commission an artist, 100% agreed
L étoile de David est nouvelle...😅
Good review again Nick
Another Great Video Mr.Nick. Thank You!!!
Love the camera, but the stock canopy should be replaced asap. It shifts as you see and it has 0 protection on top. There are a few decent options on Thingiverse to 3d print
Hey Nick have you ever considered going to one of the major whoop races in the US? It would be really cool to see an "event review" video
I have wanted to, but not gone as far as making arrangements. I have a hard time pulling myself away from family and home. Going to a race is on my "bucket" list.
I made a 3d printed adapter that allows me to mount the lux in the mob 6 canopy. All's right with the world!
Cracks me up! Your really fast, yet I can see your ducts.. What angle do you run? Looks like a rippa, great review as always Nick...👍🏻🍻👊🏻
I suspect the default camera angle on this one is around 12 degrees, not adjustable and thus it was the angle I used as well
@NickBurnsFPV
Definitely fast at 12°..lol..
Hello Nick,
take the betafpv Micro Canopy Lite, the Lux Cam fits in perfectly, is protected and you can adjust the angle.
The 75 Air Frame from Betafpv is also great, Betafpv Lava fits perfectly with it.
And take the Gamfan 40mm 2 blade props, it flies better and above all longer 🙂
Tempted to grab one of these and mount it with the board inverted in a Fractal 75 frame.
The AIO5 and Lux make an awesome Fractal75.
Omg call Peta he's bothering the Squirrel again! 😂😂😂
trespassers!! :)
12:57 in yes Nick I have the same problem breaking them there in the front. Thanks Nick great review! I already ordered one via banggood last week. Can't wait to get it here is flying great finally a mob7 hdzero that can compete with analog like flying performance 👍 awesome!!! Thanks Hdzero and Happymodel for that aio 🙏👍🫶😁
Nick, with those loose batteries run a small rubber band around one end then give it a twist and go around the other end, that might provide you a little cushion as far as breaking the battery holder to boot. 🤣
YEAAAH! Big brother to ghost!
Love using the helmet idea!!! Out def saves the aio😅
I wrapped my battery with one or two electrical tape worked well to take up space
awsome thanks for posting!
after 5 battery packs lost focus on my LUX camera on mobula6 after small crash in house. Adiitional protection is must have. there is stl's on thingsverse with different angles and a bit more protection
me too. I used a drop of instant glue to hold the focus, since than all good
@@dronevan unfortunately I can't setup it 100% as from the factory
Yea how do you re-focus the camera? Just turning it a little - mine is out of focus as well from what it was when it was new.
@@DukeEvolution
Print, order, or get a focus chart from a camera store.
Learn to use it. This is an integral part of FPV.
I set focus at 2.5-3 meters, but I have a few friends that use 1.5-2 meters for their whoops. It's personal preference. It will always give you a better image as most cameras are not focused, or weirdly focused at the factory.
@@DukeEvolution I took the camera out of the canopy and then unscrewed the jam nut (it has the notches on it, take it easy on the threads and don't man handle it). Once the jam nut is loosened you can screw the lens itself in and out while looking through your goggles until it is clear as it can be. Focus does change with distance so use your judgment for what looks best to you. Once you have it, tighten the jam nut back down and install the camera back in the canopy. It might take a little tweaking because the lens is easy to move when tightening the jam nut.
So flip entire FC 180deg so usb is up. Other then that seems great setup!
Great review as usual! To solve the problem of the usb sticking out from the frame too close to the battery, would it help rotating the fc on the yaw axis by 90 degs on the same frame?
Yea we can do that, we will have betaflight adjustments to do as well
@NickBurnsFPV this change of parameter in betaflight is easy, with the configurator and usb drivers working. Alternatively, I would use longer screws (hard to find) and some spacers to lift the fc.
@@cristianosaturni true when we are familiar with those changes. For others this could be unknown.
40F good rule of thumb, thanks! didn't realize you're in midwest also. always thought you were down south with your accent the way you say "antenna"
lol I still don’t know how I say antenna in a southern way. My wife lived in the south and hasn’t noticed either.
thanks for what you do
Wow🤩🤩🤩🚀🚀🚀
Just got the air65 and waiting for it to come in? Anyone have any input on it?
I just got mine in! Haven't flown it yet, but oh so co0ol, small, and lightweight! Good choice! 😃
could you make a video to fulfill what Happymodel does not, Calibrating current sensor? please
Not likely something I would do as its been well covered. Here is an article on this topic oscarliang.com/current-sensor-calibration/
I would never use a 75mm on 1s, so for 75mm whoop, I would compare the lite bundle with eco board + lux camera: I feel like we loose both on weight and image quality.
Nice! Man, i try flying in the house like that I'd end up divorced lol!
Just figure out the issue and see if you have some flexibility.
If it's noise, you can do it away from the people that get bothered. I got some of those.
Also... My security team won't let me fly analog, except for 3 areas that basically have glass walls to begin with. But I can fly other video systems basically everywhere else.
Loved that "very graceful landing" 😂
lol. Yep, sometimes it happens
Can you use dji goggles with this ?
No. At the very least the hdzero vrx is required with goggles that support hdmi inputs
@@NickBurnsFPV Thanks for the response Nick! Appreciate you and your vids.
@@NickBurnsFPV Hey nick! Is there a 1s micro HD out there that you can use dji googles?
@@ebarnard23 not natively. I believe only the only dji goggles that have inputs is the original dji goggles v1 and v2, not the goggles 2, not the goggles 3 etc.
8:10 Nice move nick.
ah yes, the cradle I think its called. one I don't do often. Easier to do with the smaller quads
That, indeed, is where all my whoop frames broke until I switched to the Cockroach V3.
For me its either the front or the back but always that upper support.
I saw that little elf up to no good in the lamp!
lol 100%. The other elf is taking a nap :)
Really hope an analog updated mobula7 is on the way too!
@@_tcmore maybe, but I have no word or other information on such a development.
Sound a bit higher in the throttle on your speed run than other 75s.
I can’t agree if by higher it is meant as louder
@@NickBurnsFPV it sounds to my ears anyway, like it’s using more throttle on quick change of direction. As if the build is a touch too heavy. Might be wrong.
Hi i have the elrs boxer crush and im looking for a drone and goggles do you have any suggestions? (Tinywhoop to practice indoors) ps I have a budget of 1k usd
I would need more information on what you would like to fly and where(space size).
@NickBurnsFPV I'll be flying in the park near where I live (abt size of 2sq km
@@domnicdrakon What style of flight?
@@NickBurnsFPV freestyle not yet at Bando but capable of light bando would be nice
@@domnicdrakon I would presume no prop protection? What are you looking at for quads? Anything that has caught your eye? What video system? DJI, Walksnail, HDzero, analog with or without gopro.
Might be those graceful landings that are breaking it 😂
very very likely, or at least in part.
@ I’ve only had one break on a 75 whoop that was pretty heavy. Had a whoop lite kit on it. 65 never seen that. Makes sense tho on the wider battery since the bar in between is longer and more fragile.
@@Metzgee I tend to break them on 65mm frames as well, with the exception of the most recent super light whoops.
One suggestion: Leave the House. ;)
What for? I have been flying around the house for 9 years
so the only diff from the mob 6 is the frame?
No, motors and props as well.
@ I feel like the 702 might even be better for that mob7. I might upgrade my frame to run the mob6 as a 7 ??
@@Robocopter_fpv
0702s are very good on sub 18 gram craft. Anything heavier starts being an issue, at an exponential rate.
@@lemonsquareFPV the mob6 freestyle is like 26 grams with the battery and they work great 🤷♂️
@@Robocopter_fpv
That's a good AUW. That and below is very good. Sorry I wasn't clear enough.
Should have emphasized that I am not talking about all up weight.
Finally! now I need HD0's
Keep flying it so we get a 1000 batteries update on durability of the aio
man that would be some heavy tracking to ensure 1k was hit
@ doesn’t have to be exact! Just fly it an average of 20 packs a week and let us know in a year lol
The link to the HD zero goggles didn't work.
Resolved, thank you
@@NickBurnsFPVstill doesn’t work
@@samson_BNR32 turns out it was the emoji causing the issue.
Should have tested heavier batteries too, points out the lack of performance better..
lack of performance due to larger battery weight?
@NickBurnsFPV According to other reviews I've seen, in general, but worsening as you go up in mah as expected. Could it be the tune? Or is this more the limit of what 1S can do...
Heavier batteries points out that you are still categorized as a NEWBIE TO FPV! Lolol
😉
It's not about flying an ultra light whoop with heavy batteries! It's about KEEPING an ultra light whoop, ultra light with lightweight batteries! It defeats the purpose and defeats the performance of these great ultra light whoops to use heavy batteries! Buy more batteries! Change often!
It's all about power to weight ratio! Keep it light, silly Newbie! Lolol
Happy holidays Bro!
$ave big money... Buy the BetaFPV AIR65 or AIR75 for retail $95 and don't get ripped off by buying the HDZero goggles for over $700 with the 4 antennas and a battery you'll still need for them after you spend $600 on those worst value in the FPV goggles! 💯👎
Air65 has a super clear camera and a 400mw VTX so Nick flies his entire house crystal clear! Go search for that video he did a while back and watch how clear it is! Only not quite as sharp as the HDZero version but still amazing for an analog whoop!...
And I just $aved you hundred of bucks!
Analog for the win! 🎊🥳🎁🧑🎄😁🤘
@@zicada7661 Its typical that as the battery gets bigger and heavier there are diminishing returns on flight time and agility. Weight in nearly any way will have this impact.
lol I never run more than 25 mw lol too lazy to change from last race
if it works it works
@@NickBurnsFPV I run 802 33kkv on 65mm whoop D: I am excited for that 65mm battery video, because I do not get enough.
@@smika710 not sure it will fit for your flight style with those 33kv motors I suspect you like to run pretty hard.
@NickBurnsFPV yeah, I do the lux camera and aio5. I should probably be on a 75mm platform..
Mob7 battery tray has been loose for years 😂
I wonder if the tray size is why I tend to break the upper supports?
Is it just me or this guy sounds like BdoubleO?
🩵🩵🩵
I really want to jump into HDzero and other systems as I feel like I would learn so much more on the tech side BUT I’ve already got the DJI goggles and remote 3 and the rumours of the 04lite seems like it could make hdzero kinda redundant
No chance you will have 65mm at 20g with DJI O4, 75mm 1S bellow 40g is also very unlikely. So basically, no indoor whoop from DJI unless you live in warehouse or have crazy skills... I also own Goggles 3 but bought Hdzero for tinywhoops and possible racing.
Second!
Sir please giveaway some fpv drone kit🥹🥹 I really want to have a fpv drone and I can’t afford it😔 so please giveaway some drones🥹
First lol