Hello I have the 2016 III grand scenic 1.5 DCI. The spanner is on the dash and error says check injectors. But there is no loss of power or performance. Fuel consumption is good. Could it be the sensor is damaged? Fuel is from South Africa? any help appreciated
Hi and thanks for your videos they are really good. now my sisters car has the same problem has the one in the clip, when we crank it over there is no diesel at all in the rail or injectors could this be the high pressure pump ?? the dash info says the same "injection fault" please help Regards Dave
The fault in the dash it is just a generic information message... Best is scan the car and look at some live data before starting to throw parts at the car... Thank you for watching and for your comment!
Hi Renault changes the wire colours sometimes depending on the year... so, I wouldn't go by the wire colours, but by the pin number.. Thank you for watching and for your comment!
Hi . 1.9 dci gran scenik 2009 loses power and check injection i have bin in some services they just put the kompjuter turns off but after 2 or 3 miles shoes again sou any sugestion pls ?
I have a Renault Megane diesel 1.5 that has an intermittent starting problem. I've recently changed the glowplugs, fuel filter and the fuel pressure regulator,(because diagnostics pointed to these as the issue) all was looking good then it stopping firing again. Just watched your video and ordered a rail pressure sensor, then read my Haynes manual and it says that the rail sensor on the 1.5 engine shouldn't be removed. Would you know why that might be? I now have the sensor and am concerned about fitting it. Cheers!
Never heard such thing... If is faulty, like the one on this video, what else are you supposed to do? Just replace it... Thank you for watching and for your comment!
@@esarempee Ah... Yes...that... lol To make sure nothing serious will happen, just disconnect the battery during the changing of the sensor... And you will be safe...
Hi i have a renault megane scenic 1.9 dci showing the same injection fault when im driving it in first gear it goes to about 2000 revs then loses power and i go into second and at a certain point drops the revs and so on through the gears it doesnt go over 4000 revs and it feels like the car is off the cylider do i need to change the injectors or could it be something else as i dont want start messing with them if it could be something else the car still runs and starts fine but has this issue the man i bought it from said it done it with him and he took it and give it a good run up the motorway and it stopped doing it can you give me any advice as it would be much appreciated ie mass air filter egr etc thanks in advance
You can indeed start with a service... fuel and air filter... specially if they haven't been changed for a long time... But either way, you need to scan the the car, and perhaps look at some live data, to have a better idea of what might be causing the issue... Thank you for watching and for your comment!
Had same "ignition fault", but problem was battery 32A fuse connector.to 2 red wires (if stay in front of car, looking to car, right fuse). Diagnostich showed "fuel preasure dempher error" and "fuel preasure sensor error", (do not remember exactly, as diagnostick not mine, was only watching to its screen while car check)
well... what if i cant start only sometimes.. doesnt matter if hot or cold diagnostics shows df053 fault code wich means rail pressure too high or low .. i checked sensor following your video and it is ok but also the car was starting fine during the sensor check.. injectors, pump. filter, pressure regulator bassicaly everithing you can think of have been already checked / fixed on the car and it still does this long sometimes looooong crank :/ its Clio 3 2006 1.5dci btw :D
@@LMAutoRepairs oh wow thanks for quick response. yes i did 2 of them were leaking too much i did reconditioning where i clean them up and replaced the inside valves on them and after that did the test again and it was perfect. before i did this car wasnt able to start at all sometimes. now it only cranks too long sometimes even too long that it says "STOP" on display but engine is already running ...
Hi. Very useful videos! I have the same Injection Fault message which appears when the engine suddenly STOPS WHILE DRIVING! It has the elecricity and the ignition, but the engine cannot be started right away, just after 60-120 seconds! Odb scaner returns the error code P0606! The issue happens intermittently, sometimes (but very rarely) even when starting the engine - which doesn't start, butnit cranks! Could it be some wire to/from PCM? Please help, as it is very inconvenient situation, I never know when it will stop , and I cannot take a risk to drive the car out of the city. Btw also the fuel consuption is high, from quite a time ago, even before this issue.
@@LMAutoRepairs Also, battery drains up when the car is left for approx a week not used (though not every time). I guess there is a parasitic draw somewhere, but don't know if this is related with the problem with engine stopping and the abovementioned message. What do you think?
im getting 4.97 on one terminal, earth on another but 4.97 again on tne last terminal. Appears to have no fuel pressure in the rail and a pressure sensor has already been fitted by another person
lmsvvavr i already checks the glow plugs and they are fine, did the voltage test. but the rest is unknown to me, i see just wires. Are there any units that involves with pre heating except the glow plugs itself,
Thank you for your videos!
Mi G
Thank you for watching!
Excellent detailed information, thank you for your nice work
Thanks!
👍👍
Bravo 👏
Thanks!
👍👍👍
Very interesting your videos. I hope you keep going...
John Dory
Thank you! I will do my best to carry on delivering them...
Thank you for watching!
Hello I have the 2016 III grand scenic 1.5 DCI. The spanner is on the dash and error says check injectors. But there is no loss of power or performance. Fuel consumption is good. Could it be the sensor is damaged? Fuel is from South Africa?
any help appreciated
Have you scanned the car?
👍👍👍
@@LMAutoRepairs Check glowplugs
Thank you very much!
Thanks!
👍
Hi and thanks for your videos they are really good. now my sisters car has the same problem has the one in the clip, when we crank it over there is no diesel at all in the rail or injectors
could this be the high pressure pump ?? the dash info says the same "injection fault" please help Regards Dave
The fault in the dash it is just a generic information message...
Best is scan the car and look at some live data before starting to throw parts at the car...
Thank you for watching and for your comment!
Superb info.
Thank you for your comment, and for watching my video!
Hi. I have the same problem.. the solution is to change that sensor? Thnx in advice
In this case it was...
Thank you for watching and for your comment!
exellent my brother
Thanks!
👍👍👍
For £40 you can buy a sensor tester and emulator its a great piece of kit
Car alarm and radio Services
Hi
Yes, I am aware of those... Will might get one one of this days...
Thank you!
👍👍👍👍
That's the way to do it. I have here a 2004 Laguna .9 Dci,2004,in which i think the + and-- wires are reversed ,i mean Light Green is +5V?
Hi
Renault changes the wire colours sometimes depending on the year... so, I wouldn't go by the wire colours, but by the pin number..
Thank you for watching and for your comment!
Hi . 1.9 dci gran scenik 2009 loses power and check injection i have bin in some services they just put the kompjuter turns off but after 2 or 3 miles shoes again sou any sugestion pls ?
The computer is probably pointing to what the issue is... Just get is resolved...
Thank you for watching!
I have a Renault Megane diesel 1.5 that has an intermittent starting problem.
I've recently changed the glowplugs, fuel filter and the fuel pressure regulator,(because diagnostics pointed to these as the issue) all was looking good then it stopping firing again. Just watched your video and ordered a rail pressure sensor, then read my Haynes manual and it says that the rail sensor on the 1.5 engine shouldn't be removed. Would you know why that might be? I now have the sensor and am concerned about fitting it. Cheers!
Never heard such thing...
If is faulty, like the one on this video, what else are you supposed to do?
Just replace it...
Thank you for watching and for your comment!
@@LMAutoRepairs Was wondering whether it was something to do with the pressure that the system works at. I don't want to kill myself!
@@esarempee
Ah...
Yes...that... lol
To make sure nothing serious will happen, just disconnect the battery during the changing of the sensor...
And you will be safe...
Nice scope !
thanks!
Hi i have a renault megane scenic 1.9 dci showing the same injection fault when im driving it in first gear it goes to about 2000 revs then loses power and i go into second and at a certain point drops the revs and so on through the gears it doesnt go over 4000 revs and it feels like the car is off the cylider do i need to change the injectors or could it be something else as i dont want start messing with them if it could be something else the car still runs and starts fine but has this issue the man i bought it from said it done it with him and he took it and give it a good run up the motorway and it stopped doing it can you give me any advice as it would be much appreciated ie mass air filter egr etc thanks in advance
You can indeed start with a service... fuel and air filter... specially if they haven't been changed for a long time...
But either way, you need to scan the the car, and perhaps look at some live data, to have a better idea of what might be causing the issue...
Thank you for watching and for your comment!
LM Auto Repairs i will try that and thankyou for your reply and im enjoying your videos as you know what your talking thanks again
@@darrenstockton578
👍
Had same "ignition fault", but problem was battery 32A fuse connector.to 2 red wires (if stay in front of car, looking to car, right fuse). Diagnostich showed "fuel preasure dempher error" and "fuel preasure sensor error", (do not remember exactly, as diagnostick not mine, was only watching to its screen while car check)
☺️
👍👍👍
Hello, the diagnostics showed me error DF 049. Please advise me. Renault Grand Scénic II, 1.9 dci 96 je. Thanks you.
Is the car petrol or diesel
Diesel...
Thank you for watching and for your comment!
Hello défaut obd thank you
well... what if i cant start only sometimes.. doesnt matter if hot or cold diagnostics shows df053 fault code wich means rail pressure too high or low .. i checked sensor following your video and it is ok but also the car was starting fine during the sensor check.. injectors, pump. filter, pressure regulator bassicaly everithing you can think of have been already checked / fixed on the car and it still does this long sometimes looooong crank :/ its Clio 3 2006 1.5dci btw :D
Hi
Have you back leak tested the injectors?
Thank you for watching!
@@LMAutoRepairs oh wow thanks for quick response. yes i did 2 of them were leaking too much i did reconditioning where i clean them up and replaced the inside valves on them and after that did the test again and it was perfect. before i did this car wasnt able to start at all sometimes. now it only cranks too long sometimes even too long that it says "STOP" on display but engine is already running ...
@@marosberky6367
Have you checked the other two?
@@LMAutoRepairs yes they are perfect i am out of ideas :(
@@marosberky6367
Your answer my be on the live data... check it when the car fails or struggles to start...
Hi. Very useful videos!
I have the same Injection Fault message which appears when the engine suddenly STOPS WHILE DRIVING! It has the elecricity and the ignition, but the engine cannot be started right away, just after 60-120 seconds!
Odb scaner returns the error code P0606!
The issue happens intermittently, sometimes (but very rarely) even when starting the engine - which doesn't start, butnit cranks!
Could it be some wire to/from PCM?
Please help, as it is very inconvenient situation, I never know when it will stop , and I cannot take a risk to drive the car out of the city.
Btw also the fuel consuption is high, from quite a time ago, even before this issue.
Scan the car... hopefully whatever is causing the car to stall, is triggering a trouble code...
Thank you for watching!
@@LMAutoRepairs Scan you mean with obd2 scanner? So did it, the error code is P0606: "ECM/PCM processor fault". Any sugesstions what can be done here?
Check power and grounds...
Check the loom in front/under the battery...
I had in the past where it got damaged...
Right, I will, I have had a rodent traces months ago...
@@LMAutoRepairs Also, battery drains up when the car is left for approx a week not used (though not every time). I guess there is a parasitic draw somewhere, but don't know if this is related with the problem with engine stopping and the abovementioned message. What do you think?
great , I just have the same problem . the fault is df 197 ?
ivanhoo サビッチ イワン・
Hi
I am not 100% sure... but think it was that one...
Have you scanned the car and/or tested the sensor?
i did and i change sensor with the second one , and nothing . the same thing
ivanhoo サビッチ イワン・
Do you have any codes on the ECU?
only df 197 . to high fuel pressure and unstable
im getting 4.97 on one terminal, earth on another but 4.97 again on tne last terminal. Appears to have no fuel pressure in the rail and a pressure sensor has already been fitted by another person
You have about 300 km on the highway driving, then it goes away
Hi
Not in this case... as I mentioned on the video, this faulty sensor was preventing the engine from starting.
Thank you for watching.
I got DF017 malfunction code, pre heating circuit.
Salty Couch
Glow plugs...
That can be anything from glow plugs, controller or wiring...
You need to investigate....
lmsvvavr i already checks the glow plugs and they are fine, did the voltage test. but the rest is unknown to me, i see just wires. Are there any units that involves with pre heating except the glow plugs itself,
Salty Couch
Follow the wires back from the plugs... they should lead you to the controller....
lmsvvavr thank you for your help mate 👍
Salty Couch
No worries...
Eeeee, eeeee e,eeeee
Rebel Soul
What?
🤔
Thank you for watching anyway...
Thank you so much!
☺️
👍👍👍