Take A Look At My Tools | See What The Professional Dent Techs Use, Dent-Remover
Вставка
- Опубліковано 2 чер 2024
- Paintless Dent Repair Tools PDR “see what a professional dent technician uses”
We’ve had lots of questions regarding the tools which are used for PDR, Thank you! 🙏
So here’s a video showing each tool and explaining what they are all used for on the vehicle. I really hope you enjoy the video and please subscribe and you’ll see plenty more quality repair videos
Also please check out my library of repair videos on our channel
~~~~~~~~~~~~~~~~~~~~~
✅ If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
~~~~~~~~~~~~~~~~~~~~~
✅ Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
-----------------
Chapters
00:00 Welcome
00:09 Intro
00:40 Why these tools?
00:56 Open access tools
05:40 Restricted access tools
09:08 Hammer & Knockdown
12:13 Screw tips
15:55 Polisher & accessories
19:16 Glue pull tools
20:41 Bottom part of the cart
26:18 Bottom front!
27:30 Bottom rear!
29:15 The TOOL Cart
29:52 Conclusion!
30:17 End screen
----------------------
Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
We love using the Gangrene tabs from Black Plague PDR, The crease tabs are the toughest on the market that ive tried so far, especially the 38mm crease tabs!! Use "Dent-Remover" in the discount section at check out!
get yours by clicking this link and also spend over $100 for free shipping
www.blackplaguepdr.com/discou...
For more information on what we are about
www.dent-remover.co.uk
We’re on Instagram too!
/ dent_remover_beverley
We use TubeBuddy to make our videos more efficient... want to know more and subscribe to this great bolt on service?
www.tubebuddy.com/dentremover01
Soundtrack by epidemic sounds
Whitegold by Love by the masses
By õman
All tools used can be purchased from
www.tdntools.com
eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo1MjQ0OTM5NzV9
And here’s a selection of the tools I have
TDN tool carts
tdntools.com/collections/carts
Bendable Johnson
tdntools.com/products/12-x-1-...
Ultra double bend screw tip bar
tdntools.com/collections/ultr...
Ultra dent tools, door bar (screw tip)
tdntools.com/products/st3812a...
Guard tech gloves
tdntools.com/collections/work...
Vip tools knockdown
tdntools.com/products/vip-kno...
Elim a dent V3 LED Board
tdntools.com/products/6-strip...
Screw tips
tdntools.com/search?type=prod...
Wire tools (restricted access)
tdntools.com/search?type=prod...
Glue pulling
tdntools.com/search?type=prod...
See you soon!
#PDR #DentRemoverBeverley #PaintlessDentRemoval #EastSide# ThoseDentGuys #DentRepair #pdr30 #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #pdrtechuk #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler - Авто та транспорт
If you are a beginner technician or simply interested in tooling THIS is the video for you
Thanks for tuning in I hope you enjoy, This tool cart holds my “every day” tools and I can repair 90% of damage that comes through the door.
I hope this helps you understand and give you ideas and inspiration for your own tool collection
Don’t forget to subscribe
Thanks martin
Martin, thank you for this amazing video! This is the video that i am waiting for!! ,,The job that you do the repairs are SUPER!!
THANK YOU MARTIN!,
Greetz from Holland!
Hi Martin! I love your videos man, and your efficient yet perfectionist style. I only have one recommendation for you, Stanliner tools!! If you have not ever tried one, give them a shot. Thomas makes top quality specialized tools. The Crane has become my favorite tool, and I keep finding new uses for it all the time. Cheers!
Hi Michell thank you for your comment and yes Stanliner tools, I’ve tried a few in the past but as I’m quite busy I hadn’t the time to really test and trial so I have the tools back to my friend as he’d lent me them.
If I could go to a pdr shop and hold them in my hand I’d buy some and have another shot. I’ve looked on the website but not too sure what to order and that’s the reasons why I don’t have any
Super well made tools though and he’s done a stella job designing them
Great video as always, Martin 👍. Thanks for sharing your good tool kit 🔝👌⭐⭐⭐⭐⭐
Martin, love your PDR repair videos! Getting Ready to work on a Lexus that has edge damage on the panel and I just saw your video on these fires thanks I still trying to figure out the best way to tackle this but you solve that thank you keep up the great work from the US Florida I am currently taking online courses through Denttrainer Myke Toleda!
Very top video Martin !! This tool cart is a great consumer dream ... Congratulations on the great professional you are !!!
Hi Geovani, thank you. I did have you in mind when I made this video. To show my full tool selection and maybe give you some ideas if you can get some made where you are as you said it’s very difficult to get these tools.
This is the main tools I use for every day dent repair.
Thanks for watching
Martin
Thank you for the video !
Hi Martin excellent tool cart nicely sussed out, we have just gone into a 5 day lockdowm due to one case of infection reveled today, first in 9 months so can't complain. Stay strong family and friends in the UK 🇬🇧😎.
Martin, thank you for this amazing video! This is the video that i am waiting for!! ,,The job that you do the repairs are SUPER!!
THANK YOU MARTIN!,
Greetz from Holland!
Hi Turgay thank you so much for your kind words. I think this part is missed a lot by dent technicians... so by showing the full range of tools and not all the brand new super shiny ones, it helps technicians out.
Thanks for watching and take care of yourself
Martin
Great video Martin 👍🏻
RESPECT!
Thank you Kindjiro 🙌🏼
very well organised tool cart . very handy information and discription of the tools for the job . I'm literally just starting out havnt attempted any dints as yet , but having the rite tools to begin with is the best start .
thanks mate !
Hi Keith thanks for your comment. I’m glad you enjoyed the video and the tool tour. Like I say in the video I can literally repair 95% of any jobs which come through the door with this set up, and although they are pricey they last forever so it’s money well spent
All the best with your PDR journey
Thanks Martin 🙌🏼
@@dentremover01 🙌
Thank you Martin
Great video. I am just about to start work. I was a motor mechanic and vehicle painter so you can imagine the toolboxes and tools etc. It is great bit of guidance for the initial setup. Thanks for sharing...
Hi Geoff. Thanks for watching and commenting. Oh yes for sure I have al load of other tools too. It’s amazing what you acquire over time!
My pleasure glad you liked it and all the best
Martin
Thanks for the great tour
Thanks Allen
Well played dude... great video as always
Thanks Dude!!
Great Video, thanks for sharing. It helps to mention that these tools cost money, LOTS of money, thousand upon thousand of dollars worth of tools. PDR tools are not cheap and it could be very challenging for a beginner with a limited budget to get into this trade, its a very difficult trade to learn, expensive tools, and takes a long time to become good at it to where you make any decent money. Nonetheless, its a long road but worth it if you have the time, patience, and of course the $$$$.
Thanks Javani, yes that’s true they do look expensive some of them.
BUT in the bigger picture, 1 tool costs about as much as one job? Or less if you buy tips or knockdowns?
And once you have bought the tool it’s not going to perish over time it’s a steel bar and very strong. If you buy cheap you buy twice as they say.
The tools on my cart probably add up to a good full months work..... and I’ve had these for years..... so your making a hell of a lot more money and profit than say a bodyshop who would pay 10k-40k for a spray booth or wheel repairing machine.
So a $100 dollar tool can make you 300-800k
Hope this brings things into perspective,
Thanks Martin
Hi pal your crutch handle door bar looks like the one my friends makes Paul Clayton just wonder if it was
Hi Will yes most probably. We worked together as panel beaters and then he showed me the ropes with PDR. We use to make the bars while panel beating then he made some which I got off him. Still use them daily now 🙌🏼
Fantastic and very grateful and it has been very informative thanks Martin
Hi James, my pleasure I told you to wait!! Hope this has helped you out
Thanks Martin
@@dentremover01 it sure has I need to get saving as I think I might give this a go as a career it ain't looking to good
You know where we are if you need any pointers. Il send those tabs ASAP I haven’t forgotten 👍🏻
@@dentremover01 thanks Martin very good of you
Nice tool's sir
Did you know I would love this job?
Thanks Andrew. Have a go and get practicing
Thanks Martin
Thanks martin, every time I watch your video i learn some new. tools expensive one = good quality. good for every day use. some cheaper one i used it is work from China. and nowadays some of Chinese technician made good tools too, not on the international market.
Hi Bill, thanks for your feedback and that’s really great you can take some ideas away from my videos that’s why I do them for you all.
Regards the tools these are my personal ones so I wanted to show what an everyday technician has...
Yes I agree there’s great tools from China and other countries. I know Pdr tools are expensive- I hate buying tools BUT once you’ve bought them they are yours forever. I’ve actually just ordered some cheaper Chinese tools this week.
This is a small industry so tool makers do have a monopoly
Take care, Martin
Hi Martin, when I bought my van the garage had previously paid someone to remove a dent on the rear door. However, I now find that where it has been removed it feels magnetised and attracts metal to that spot, so after a few days I get dirt attracting to the spot in a 7cm circle. Any advice on what has caused this and how to stop the dirt attracting to it? Many thanks.
Hi Martin! We met at JAE years ago. You did some PDR on my friends Supra and took a look at mine with a view of us catching up the following year. This was a long time ago now. Last time we spoke was when I stumbled upon your Facebook page and said hi... and here I am again. 😁 I love your channel mate. I've literally binged watched around 10 videos the last two days. Having seen your work in person, your work is impeccable. Having worked with cars and boats for years, wrapping and working with grp, the reason I found your channel is because I'm considering changing my career from wrapping and moving into PDR. I was wondering if you have any advice on training courses? I've accumulated a starter kit and intend to get to work on my daily work horse for some practice. I've also seen some courses offered, but they're pretty costly. Any advice would be appreciated. I'm pretty serious about a change in career. Cheers and keep up the good work!
Adam.
Hey Adam thanks for your message! I think I remember that supra!! And all the MR2s I did!
Ok the best people to speak to is TDN or KecoUk in Peterborough
It is expensive BUT if your serious then all the money you spend is nothing compared to what you will earn. Don’t forget you can offset the cost with your Tax when you get going
Let me know how you get on just message me through the socials
All the best Adam and don’t forget to mention me when you speak to Kevin/Colin at Keco uk
Martin
Hi Martin
Great video!
Can you advise what tool cart this is please and where to purchase
Thank you
Como comprar en su tienda dent pdr. Se ven muy buenas sus herramientas
how do you work in gloves? I just drop everything and cant pick up a thing with them on. Thanks for the great video on your tool cart.
Ah! They have the fingers cut off so you can grip! I use latex gloves to work in mainly
Great video, thank you. Where can I find the inspection board, the panel clamps and the goose neck pliers? thanks
Thanks Frank. You can get the inspection board and the goose neck pliers from (dent tools europe) the panel clamps can be bought from most engineering shops
Thanks for watching
Love it great to see your tool set up... My only complaint is that I now feel the need to spend some money and buy some more tools, lol... Lets start the hashtag #iwantthemartinsadlerhulahoop :)
Hi Tom! Thanks and yes there’s always something to buy- as for the hula hoop! Hopefully coming out in 2021!
Hey Martin, or anyone else, do you know if the dentcraft tips will fit the Ultradent double bend screw tip bar?
Hi FunkyT, I’d take a guess and say yes, because it would be silly not to make them all the same as they wouldn’t sell as many? Just a guess though
It would have been great if you'd zoomed in on the tools. It's kind of hard to follow you, otherwise it was a very good job sharing your knowledge.
Thank you Naress123 for your input. Il
Take this onboard for any future tool reviews etc
Take care
Martin
The light How many watts is the power ?
Hey Martin, I was watching one of your other videos but dont remember which one. I am interested in the whale tail tips from Italy. Where I can get those? Cheers from Dallas Texas!
Hi JU Enthusiast thanks for your message. Yes the place is called DB Tools and they are from Italy
@@dentremover01 Thanks Martin!
My pleasure
Who is the manufacturer of your light board? You prefer lines over fog? Why is that?
Hi Kevin. The led board I’m using is from Elim A Dent. And I prefer lines over fog,
For every day use. I use fog on much larger repairs until I get down to a detailed level then I switch- or is both
What length and size/diameter is that Ultra double bend rod? They have a few choices on the website.
Hi Steven wow you don’t have it?! I will let you know ASAP but I use it on every fender repair and any other open access area.
Il measure it and let you know
Hi Steven, it’s 24” and the bar size is 11-12mm
Hope this helps
@@dentremover01 Thanks!! I've seen it used by a few techs and wanted one. Just wasn't sure about the right/popular size.
If you get crazy then you are the reason hhhh 😊 I'm joking
I am asking you to support some help
I do not have the money to buy
Poor quality of presentation. Can hardly see the shape or design of the tools. You need a close up camera to show the points of the tools also
Hi Patrick apologies I made this during covid lockdown with limited resources
Thank you Martin