Bambu Lab A1 Mini - Can it be set up and print in 15 mins? Tool: - Bambu Lab A1 Mini - www.bambulab.com - Oveture PETG - amzn.to/4aoOVQW Chapters: 00:00 Intro 00:22 Unboxing 02:18 1. Unlock (a. Z Axis) 04:53 1. Unlock (b. Cut Ziptie) 05:10 1. Unlock (c. Remove Foam Padding) 06:40 2. Lock Heatbed - Tighten Down 3 Screws in GREEN 07:41 3. Purge Wiper Install 09:02 4. Spool Holder Install 10:17 5. Power Up Printer 10:53 6. Set up Network 11:48 7. Printer Binding w/ Bambu Handy App 12.17 8. Install PTFE Tub 14:30 9. First Print - UNDER 15 MINS From Box to Print! 16:47 First Print Completed Check out my website at mcfixit.us Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT. #mcfixit #bambulabs #a1miniprinter -- Supplies used to record this video: * GoPro Hero 7 Black - amzn.to/3f3ALtb * 256GB Flash Drive - amzn.to/33pAueG * Vlogging Frame - amzn.to/33tajE0 * GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu * Youmic Lavalier Lapel Mic - amzn.to/2R55sWX * Boom Stand (tripod) - amzn.to/3bdkQaw * 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM * Portable Battery Powerbank- amzn.to/3vJQc0q * 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH
For those having trouble logging in because they keep asking for your ph# and pw.. Uninstall the app and redownload from the actual store not the QR code.
In reality, it's probably like 30 minutes to get in running if you want to achieve excellent printing results from the beginning. I also recently got an A1 mini (no combo). It's only really ready to print after calibration, which also takes a good 15 minutes (As you see in the video: 5 minutes for vibration compensation, 7 Minutes for motor noise cancellation). The printer itself is still f... awesome and quick to setup!
I think that’s why my print wasn’t perfect with the first one. But still much faster than previous brands to unbox and get started with the first print. I did the calibration, vibration, and moot noise after and had good success with all future prints
Only thing I didn’t like on this video is the heavy breathing into the mic, I was using AirPods and holy crap, that was uncomfortable. The rest… Great video
Yes, it gives regular intervals to lubricate and comes with a tube in the box. It takes about 5 seconds to do on the Y axis metal part. I thought I did that in this video, but apparently I did not. I've been printing non-stop since I made this video and the system has told me to do it three times since.
5:10 for those following along, don't take that foam out just yet. That way at 8:14 the bed doesn't slide when you flip the printer upside down. Might help.. Might not matter, but might be easier with less moving parts :)
How do you feel about its build size? Was it good? I know it’s small of course. But does it feel small “constraining” or small “enough”? I am anticipating mostly prototyping for IoT and miniature printing but I’m a bit nervous about getting the mini. Though the size and weight of the machine itself makes it a really attractive option as an international student who most likely will be coming back home in a couple of years (hopefully by then I’ll get a bigger machine but better to be prepared)
It's really great. I have only come across a few things that I wish I had a larger printer for. But the 180x180x180 is pretty good sized. I am starting to save up for a second Bambu Labs printer, and I'll probably go with the P1S or X1C, depending on how patient I am. Overall, the quality of this A1 Mini is great, and for smaller prints, it works like a wonder. I've had the least amount of misprints on this printer over any other printer i've owned in the past.
It was petg plastic that I had to increase the temp for by a few degrees bc there was no present for that branded filament. It works so well. I’m very impressed with the quality and speed of the prints. I’m soon going to be buying another Bambu Labs printer
I just saw they have a really good deal on it. I'd encourage you to buy the AMs lite as well so then you can print 4 colors at once. It costs more, but it's definitely worth it!
Your lucky to get a reasonable tool kit. All I got was a cardboard box with 2 all metal hex keys, not the nice plastic handle type. The rest of the items were in a bag. UK delivery if that makes any difference. However no difficulty in getting perfect prints.
Sorry to hear that. I'm unsure why it would be different. It's a great printer. Thank you for your comment. I hope Bambu sees this and fixes not having a quality tool kit in there!
Yeah, I’m sure mine would have too. It took a few mins to realize I needed to increase the standard time for PETG filament since there wasn’t an exact match with branding. Once I did that it’s done awesome with that type of plastic ever sense!
WOW! I have an ender and it takes 15 minutes to get a print to work right and took like 3 hours to set up. I might be looking to upgrade. That bed looks kinda small though. What size it?
Yes the Bambu labs printers just hit different. I had Creality before I upgraded to the p1s and couldn’t be happier. The A1 mini is a small bed at under 200x200. But great for small prints but if want look at grabbing the A1 it’s 256x256x256
@Kennytashro3072, thank you so much for answering this question by @jammiesgotarun8071. I agree it's so much better. I still have a CR6-SE and it's just collecting dust now. The built plate is a little small, but that's good for almost all of the prints I've ever done though. I like the compact design and functionality of it!
@@TheMadSciontist Awesome. Did you purchase the AMS lite? It's worth the additional amount for being able to have multiple color options on the same print.
It is by far my favorite printer I’ve ever owned. I can’t wait to get one of the bigger bill plate ones! Saving up some money right now to do so. So hopefully in the next month or so so you will see a new video.
I was really surprised that yes, almost, definitely if you don't do it for the first time. And the WLAN thing is awesome. A couple of years (or decades) ago you would have spent weeks getting sth. that complex to work, install drivers and stuff.
Yes I know. It's amazing how well this things works for the cost. I wis I would have known about Bambu Labs a few years ago when I spent a lot of money on a few other printers. I am a big fan now and saving up for my next printer right now.
@@mikekiske yes, I did not have the temp high enough. You can see many more of my prints on my channel that come out clean. I've only had a handful of bad/failed prints in over hundreds of successful prints. I'm really impressed with this printer
Yes, it’s super straight forward and you can have a lot of fun from what’s just programmed on the SD card from opening the box. They took a lot of the guess work and frustration out of printing by actually creating a printer that nearly ready to print after taking it out of the box. Mine hasn’t stopped printing since I made this video. The least amount of flaws and fails ive ever experienced too. I’ve printed probably 100 items and had 2 fails and 3 or 4 flaws…. Which is awesome!
@@MCFIXIT yep, it seems like a super reliable and easy to use printer! I've printed before and made my own models but calibrating and taking care of a printer has always seemed daunting until I saw the A1. Glad you like it as much as I hope to do! :D
this helped me find the spool holder bracket which I thought I didn't even get. thanks for doing a proper unboxing instead of it being just the printer u unboxed all of it including the accessories
Bambu Lab A1 Mini - Can it be set up and print in 15 mins?
Tool:
- Bambu Lab A1 Mini - www.bambulab.com
- Oveture PETG - amzn.to/4aoOVQW
Chapters:
00:00 Intro
00:22 Unboxing
02:18 1. Unlock (a. Z Axis)
04:53 1. Unlock (b. Cut Ziptie)
05:10 1. Unlock (c. Remove Foam Padding)
06:40 2. Lock Heatbed - Tighten Down 3 Screws in GREEN
07:41 3. Purge Wiper Install
09:02 4. Spool Holder Install
10:17 5. Power Up Printer
10:53 6. Set up Network
11:48 7. Printer Binding w/ Bambu Handy App
12.17 8. Install PTFE Tub
14:30 9. First Print - UNDER 15 MINS From Box to Print!
16:47 First Print Completed
Check out my website at mcfixit.us
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #bambulabs #a1miniprinter
--
Supplies used to record this video:
* GoPro Hero 7 Black - amzn.to/3f3ALtb
* 256GB Flash Drive - amzn.to/33pAueG
* Vlogging Frame - amzn.to/33tajE0
* GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu
* Youmic Lavalier Lapel Mic - amzn.to/2R55sWX
* Boom Stand (tripod) - amzn.to/3bdkQaw
* 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM
* Portable Battery Powerbank- amzn.to/3vJQc0q
* 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH
For those having trouble logging in because they keep asking for your ph# and pw.. Uninstall the app and redownload from the actual store not the QR code.
Good tip! Thanks for commenting this!
In reality, it's probably like 30 minutes to get in running if you want to achieve excellent printing results from the beginning. I also recently got an A1 mini (no combo). It's only really ready to print after calibration, which also takes a good 15 minutes (As you see in the video: 5 minutes for vibration compensation, 7 Minutes for motor noise cancellation). The printer itself is still f... awesome and quick to setup!
I think that’s why my print wasn’t perfect with the first one. But still much faster than previous brands to unbox and get started with the first print. I did the calibration, vibration, and moot noise after and had good success with all future prints
Is this what is included for $199usd on the bambu site? Dobi need the combo kit or just this?
This is the basic kit. The combo kit normals comes with ams lite. Which is a great addition to this printer bc you can print multiple color prints.
Protip - the bag is meant to help you pull the whole box of contents out no need to cut it open in the main box.
Good tip! Thanks for the heads up!
Only thing I didn’t like on this video is the heavy breathing into the mic, I was using AirPods and holy crap, that was uncomfortable. The rest… Great video
Yeah, sorry about that. I’m working with some new audio gear and haven’t quite figured it out yet. Hopefully future videos are better audio!
@@MCFIXIT hehe I am neat picking here, great video!
Fantastic video. Followed it and I'm up and printing.
New subscriber.
Thanks so much. It’s such a great printer! Mines gone non-stop since I bought it. Thanks for the view, comment, and sub!
I'm impressed because the first print failed.
"a little error", that is a failed print, my first two prints detached from the bed.
Another video says that you have to lubricate? Was this step skipped?
Yes, it gives regular intervals to lubricate and comes with a tube in the box. It takes about 5 seconds to do on the Y axis metal part. I thought I did that in this video, but apparently I did not. I've been printing non-stop since I made this video and the system has told me to do it three times since.
5:10 for those following along, don't take that foam out just yet.
That way at 8:14 the bed doesn't slide when you flip the printer upside down. Might help.. Might not matter, but might be easier with less moving parts :)
Good tip. I’ve not done it this way but that makes sense why it would help out! Thanks for commenting!
How do you feel about its build size? Was it good? I know it’s small of course. But does it feel small “constraining” or small “enough”?
I am anticipating mostly prototyping for IoT and miniature printing but I’m a bit nervous about getting the mini. Though the size and weight of the machine itself makes it a really attractive option as an international student who most likely will be coming back home in a couple of years (hopefully by then I’ll get a bigger machine but better to be prepared)
It's really great. I have only come across a few things that I wish I had a larger printer for. But the 180x180x180 is pretty good sized. I am starting to save up for a second Bambu Labs printer, and I'll probably go with the P1S or X1C, depending on how patient I am. Overall, the quality of this A1 Mini is great, and for smaller prints, it works like a wonder. I've had the least amount of misprints on this printer over any other printer i've owned in the past.
Did you ever figure it out what happened to the poor benchy? Because to me, it looks like a failed print.
It was petg plastic that I had to increase the temp for by a few degrees bc there was no present for that branded filament. It works so well. I’m very impressed with the quality and speed of the prints. I’m soon going to be buying another Bambu Labs printer
Thanks! I’m really interested in the A1 mini, it would be perfect for me.
I just saw they have a really good deal on it. I'd encourage you to buy the AMs lite as well so then you can print 4 colors at once. It costs more, but it's definitely worth it!
Your lucky to get a reasonable tool kit. All I got was a cardboard box with 2 all metal hex keys, not the nice plastic handle type. The rest of the items were in a bag. UK delivery if that makes any difference. However no difficulty in getting perfect prints.
Sorry to hear that. I'm unsure why it would be different. It's a great printer. Thank you for your comment. I hope Bambu sees this and fixes not having a quality tool kit in there!
How long did yours take to ship/arrive? Ordered mine today from UK site
My first prints using the included PLA filament came out perfect for the Benchy and then the scraper tool.
Yeah, I’m sure mine would have too. It took a few mins to realize I needed to increase the standard time for PETG filament since there wasn’t an exact match with branding. Once I did that it’s done awesome with that type of plastic ever sense!
WOW! I have an ender and it takes 15 minutes to get a print to work right and took like 3 hours to set up. I might be looking to upgrade. That bed looks kinda small though. What size it?
Yes the Bambu labs printers just hit different. I had Creality before I upgraded to the p1s and couldn’t be happier. The A1 mini is a small bed at under 200x200. But great for small prints but if want look at grabbing the A1 it’s 256x256x256
@Kennytashro3072, thank you so much for answering this question by @jammiesgotarun8071.
I agree it's so much better. I still have a CR6-SE and it's just collecting dust now. The built plate is a little small, but that's good for almost all of the prints I've ever done though. I like the compact design and functionality of it!
A fellow disc golfer nice! great video im heavily considering buying this printer
Hey! It’s a great printer. Well worth the investment.
@@MCFIXIT I just pulled the trigger on one this morning!
@@TheMadSciontist Awesome. Did you purchase the AMS lite? It's worth the additional amount for being able to have multiple color options on the same print.
I will be ordering the A1 mini as my second 3d printer. I now have an Elegoo Neptune 3 pro running klipper
It is by far my favorite printer I’ve ever owned. I can’t wait to get one of the bigger bill plate ones! Saving up some money right now to do so. So hopefully in the next month or so so you will see a new video.
@@MCFIXIT i’ll be looking forward to it!
Where i install the spool holder i have a big piece of plastic fixed to the apright? You seem to have two holes to screw the plate straight to?😢
That’s strange. I’d write their customer support team to check on it. They may have a way to help you out with that!
@@MCFIXIT Update: It was a plastic packaging support 🤣 unscrewed it and now I'm firing on all four cylinders!
I was really surprised that yes, almost, definitely if you don't do it for the first time. And the WLAN thing is awesome. A couple of years (or decades) ago you would have spent weeks getting sth. that complex to work, install drivers and stuff.
Yes I know. It's amazing how well this things works for the cost. I wis I would have known about Bambu Labs a few years ago when I spent a lot of money on a few other printers. I am a big fan now and saving up for my next printer right now.
@@MCFIXIT Hi, there.
Why the benchy is so rough? It's because of the PETG itself?
Thanks for the video.
@@mikekiske yes, I did not have the temp high enough. You can see many more of my prints on my channel that come out clean. I've only had a handful of bad/failed prints in over hundreds of successful prints. I'm really impressed with this printer
@@MCFIXIT Great! I am about to buy the same Bambu's. Thanks for sharing.
really excited for my A1 Mini to arrive. the setup being this easy really rocks as someone who hasn't had a printer before
Yes, it’s super straight forward and you can have a lot of fun from what’s just programmed on the SD card from opening the box. They took a lot of the guess work and frustration out of printing by actually creating a printer that nearly ready to print after taking it out of the box. Mine hasn’t stopped printing since I made this video. The least amount of flaws and fails ive ever experienced too. I’ve printed probably 100 items and had 2 fails and 3 or 4 flaws…. Which is awesome!
@@MCFIXIT yep, it seems like a super reliable and easy to use printer! I've printed before and made my own models but calibrating and taking care of a printer has always seemed daunting until I saw the A1. Glad you like it as much as I hope to do! :D
Thank you for a great setup video!
Thanks so much! I appreciate you watching and commenting!
Is that the printing plate it comes with?
Yes! It’s great!
Great video thank you
You are welcome. Thanks for watching and commenting!
this helped me find the spool holder bracket which I thought I didn't even get. thanks for doing a proper unboxing instead of it being just the printer u unboxed all of it including the accessories
You are welcome! Thanks for watching and commenting!
I bought an extra one because I didn’t know it came with one. They really need a “what’s inside the box” on their website.