Jeep no Crank no start solve
Вставка
- Опубліковано 2 тра 2019
- #jeep #nostart #solve #nocrank
Hi, in this video I will show you how to test your starter before you replace it and also I will show you how to make your car start for free, free fix permanent fix at your own risk please enjoy the video!
Check out my instagram: / nestor_auto_repair - Навчання та стиль
Hard to believe I cleaned my neutral safety switch several years back and forgot about it since. This video did as intended and saved me a bunch of time. Thanks!
Thanks for your feedback boss
It's really good that people are willing to help for free....
Thanks 🙏
Bro you just saved my butt! Thank you! Worked exactly like your video showed, I was stranded in a bad spot.
You're welcome Brantley , thanks for your feedback
Thank you for showing this quick fix for those of us who want to quickly check the starter to see if the starter is good, and to get around having to remove and take apart and clean the Neutral Safety Switch if the Neutral Safety Switch is bad.
I can see taking off the NSS off to get around the starting in gear problem, but I want to do it when I have the time to do it without rushing. To get in there to cut the zip ties, pull the cable, remove and disassemble and clean the NSS, carefully reassemble it, snake the cable back up there, replace the NSS on the Transmission housing and align it and test it on the Jeep. Leaving time to do it all slowly and carefully and fix it if there is a problem (hopefully not).
Nice thanks for your feedback
Thank you so much!! I really did not know where to go after I changed the starter. Fuses good, starter solenoid good. Started the car with the screwdriver and scared the crap out of myself. Cleaned up the safety neutral switch and started right up. Thanks again.
Lmao thanks for your feedback boss
@@nestorautorepair I have a 2001 Jeep Grand Cherokee. We went to attempt the starter/screwdriver check but the starter on it only has the 2 large posts, Any suggestions?
Hermano, this was really helpful , thank you! I have a 94 and the same thing as happening. At least I know how to turn my car on now.
I wish I would have found this video before I started changing things .... literally the same problem that mines is having .... I bought a new starter a new battery and nothing . Tried the screw driver trick and it fired right up thanks for stopping my headache I was having but would have been awesome if I found this great video first
Your welcome boss thanks God you found my video
My saving grace!! Was stuck for a while in a parking lot til i watched this video. Thanks brother!!!
You are very welcome Patrick, I'm so happy that my video help you , thanks for your feedback
@@nestorautorepair but i must say i thought it was my nsw but turned out to be my starter. Jumping it off only worked for a few days
Thanks for sharing patrick
This video helped me in a tight situation my buddy loan me a screwdriver and I got back on the road thank you so much for posting this
Yes sir you are very welcome, thanks for the feedback
Best trick and video I've ever seen on tube. That safety neutral switch intro though! lol
Thanks Jay Kay
Works great, that was the problem in my Jeep Cherokee Sport, 4.0L, 6 Cyl, Year 2000, thanks a lot you save me tons of money and time. Best regards!!! From Mexico City
You're welcome boss , thanks for your feedback , gracias
I think this is exactly the problem I'm facing in my 2000 cherokee sport.Thank you!
That was exactly the issue with my 2001 cherokee 4.0
I will be installing a bypass button this weekend. THANKS FOR THE VIDEO!
You welcome Samuel , thanks for your feedback
What do you mean by installing a bypass button? Sorry for asking.
This worked for my 1992 cherokee. Thanks for the help!!
You're welcome thanks for your feedback boss
Thank you! I'm new to working on my jeep and this helped me a lot!
Thanks your welcome, thanks for your feedback
Preciate the video man! My buddies rig has been down for a hot minute til we saw this 🤙🏼👍🏼👍🏼👍🏼
Thanks Gavin 💪👍
This video saved my ass thank you, I wish I saw it sooner before I put in a new starter and fuel pump 😂
Lol thanks for your feedback boss
But u helped me help these two sisters at a Walmart parking lot get home do more videos you truly did help them go home
Really do appreciate the video . Fixed it easily . Keep up the good work !
Thanks boss for your feedback
Nice fix, I like the button idea. My 98 XJ has this issue. @@nestorautorepair
I’m glad I came across your video. I’m most definitely installing the switch & the push button.
Thanks for your feedback , yes go for it
I swapped a starter and was still dead one click with interior lights. Screwdriver started it uo and saved me from gettibg towed in a parking lot. Thanks so much man. Starter was really weak anyways. Ill see how long this 65$ chinese one lasts.
Thanks for your feedback boss good luck with the china made lol
Love that 1940s tech design! Good job!
Ok
Wish I saw this when I had ours ... exact same problem... thanks so much!
You're welcome
you saved me with this one just replaced the starter and diddint know what to do was gonna take it to a mechanic
Thanks for your feedback Jack
Thank you so much for your help my xj was doing this and it ended up being my nss 🙏🙏
You're welcome boss , thanks for your feedback
U just saved my life, on the way 2 the junk yard
Ty X Infinity
Good you're more then welcome, thanks for your feedback
Hi. Thanks a million for the great tip. Automobile Association said it was the starter, garages said it was the starter, but the car started fine when I connected the terminals for a moment. Great. I think your switch idea is great. I'm not sure whether I'll manage that.
Oh thanks , yes I'm sure you can do it is very easy , thanks for your feedback and I'm so glad that
One of my video help you out
@@nestorautorepair Cutting the tie wraps proved to be the worst of the disassembling. The NSS isn't in the easiest of places, but it's workable. Of the 3 tie wraps that hold the cable in place, 2 seem impossible to reach. Certainly impossible to attach new ones when assembling.
What Is the reason you didn't make a short cut in the connector so the car would always start?
I see they did not want to add new parts
Ok
Nicely done I've always heard it called a bypass
Thanks for sharing!
Liked and subbed
Great video....that was exactky what i was looking for...thanks bro!!!
You welcome boss , thanks for your feedback
Great vid mate. Thx for sharing. I can't believe that switch cost that much
Yes sir you're welcome ,
Best video you helped me bro I love you in a brother way
Thanks Houston I love you too, brother , thanks for your feedback
THANKS VERY MUCH MAN VERY USEFULL..!! THANK YOU THANK YOU
Your welcome boss ,, thanks for your feed back
Bruh you possibly saved my day. Thanks.
Thanks boss
@@nestorautorepairand you were right. Heading to the auto part store for a replacement starter.
Mmmm sweet thanks for your feedback
great fix thanks
Thanks boss
Thanks man!
Your welcome
Magic bro. Big time thank you sir..,
You're welcome. Thanks for your feedback
Great video man
Very helpful, it's happened to me 2 times called tow. Truck to mechanics
Thanks Don bliss
Great video. Thans for the help.
You're welcome boss, thanks for the feedback
Having the same issue on my ZJ. What kind of wire did you use? Also did you run the wire through the fire wall or car side panels?
Hi,, I run it through the fire wall ,, you can use some good speaker wires
Totally useful!
Thanks. It worked
So by using that wire and the push button did you bypass the neutral safety switch sensor or did you have to replace the nss as well ?
You don't need to replace it , just remember that the jeep will star on any gear that's the point of the neutral switch so you can only start it on P and N, but with this bypass it will star on PRND
Thank you brother
You’re welcome.. Thanks bro for your feedback
thanks I was able to solve it Katy tx 09/10/2022
Bro I have 2007 commander it runs great but when drive it for 30 to 45 minutes and stop for a couple minutes at the store. Then I try to crank it, I feels like it's going to turn on ,all the lights are on it doesn't want to trun on. It turns on when it cools down I think. I have talked to friends with that have the same car they also have the same problem.
Question doest the car turn over like it will crank but don't start ? Untill it cool down ?
GOOD VIDEO.
Thanks
I like this Mr. Nestor, I think this is the way I need to go & just not deal with the NSS ... Thank You Sir ,, But will it start in any gear ?? Should I be aware of that?? Danny in Texas...
Yes it will start in any gear be careful sir
Thank you brother Nestor, I installed the switch system last week. I went to the auto parts store and found exactly what you were using, a good quality push button starter switch.
I used a 20 amp in line fuse to protect the circuit. So far everything is working perfectly, now I need to find a good mounting place for it in the dash somewhere.
Anyway thank you for your video and your safety cautions about the vehicle now starting in any gear, I'll be careful.
Stay blessed Sir, and keep safe.
couldn’t stop watchin the intro😭🤣
Nice!!
What would you suggest if I touch the terminals and get absolutely nothing?
Great video btw!
Bad starter then ,, thanks boss
Two important components should’ve been checked: The starter fuse and/or the starter relay.
Ok
Thank you so much for this video ,bro you just save my ass !!
You're welcome boss , thanks for your feedback
So I actually have the same issue and exactly what you did made it start so if I were to switch that specific part would I have to add the switch like you did in order for it to start regularly again ?
No if you get the new part that I show neutral safety switch you be good
Thank you so much already 200$ in to the issue and that was the whole fix YOU’RE AWESOME MAN !
Thanks boss . I really appreciate your good feedback
So just to make sure if it doesn’t crank when you do this the starter is bad right?
Yes
Does this diognosis only work with the switch out of the Jeep?
No you can just leave it in there don't touch it
Will this get the engine light on during this issues?
No
Touchs with a screw driver at desame time...the small terminal and the big terminal on the top..?
Yes
I tried it it cranked 👍 but when i whent to try it again, the flat head trick it wont spark or crank any more. Did i blow a fuse?
More likely yes
That did that to me a few times so I rigged up a push button on a old extension cord and put clamps on the end so I can clamp it to the contacts and start it i still don’t know why it randomly does it though only sometimes
Bad ground some where
So you took it out and then started right up like you shown right? I just tried todo the screwdriver trick and it does turn but no fire up.
Then your starter is bad , make sure you have power there at the starter
@@nestorautorepair it definitely has power and the starter isn’t bad I got it tested way before I found your video.
Then put the car in neutral
genius
Thanks boss
What 30 amp fuse is that for?
I'm having this problem with my Jeep. But it happens intermittently. I'll go weeks and everything will be fine and then boom it won't start. I let it sit for about 10 minutes and it will start. I've changed the battery cables and it's a new starter and it's the same issue. Have you ever had the neutral starter switch fail intermittently?
Some time this will happen yes on and off and next thing you know it will never start again
Ok. Thanks. How can you tell if it's the neutral safety switch or if it's the ignition switch in the column?
With a tester at the inigtion wires see if it send power when you turn the key
95 jeep Cherokee I’m having interior lights and radio working but no crank if I turn the key to start it ..nothing but if I sit in my jeep with the radio on for 10 min it will then start up almost like it’s charging something to start..
Hopefully this will help for me I’m working on mine on this date July 18 2022
Good let me know
@@nestorautorepair didn’t run😥
Is it normal for it to spark bad and at the battery
Yes
How to do this if the it’s 2000 where the starter is different
This will be the same ,, al the stater on every car has 3 wire
So I did the push button for a while but finally got around to replacing the nss and it still doesn’t start with just the ignition
Then your problem was not the nss, is your key
It’s neither it’s a faulty ecm
Ok thanks for sharing
Hi, I did this to 1996 Jeep Cherokee , touching the starter , it sparks. Car cranks but no start. New starter, new battery, new alternator, new coil/plugs.
Ok how about with the key ? The jeep crank ?
Man. You’re a life saver god bless you 🙏
There’s a spark but no start? It doesn’t crank when I turn the key and screwdriver is down there, but while screwdriver is down there it sparks? What does this mean
Soun like you need gas
Or jump the relay in engine bay
Sure
What happens if theres a spark but nothing happens ? Is it the starter ? The information isnt really clear otherwise becsuse i just switch my nss
Where is the spark at the starter ?
@@nestorautorepair by the screws in the front right where it is in the video, I banged on the starter and made it work again it but I definitely need to replace it
Yes the starter is bad then
Hey man so i have the same issue but mine is a manual
In your case it can be the clutch switch bro
turn key on put gear selector in neutral start with key
Yes same fix newtral safety switch is bad
I just replaced my starter, battery and alternator but I had no spark
Was the Jeep working good before you did all this work ?
Coil and crank position sensor are two possibilities..
I just bypassed it.
Good
i tried the screwdriver trick and the starter just clicks still :(
Starter is bad
@@nestorautorepair it was the starter 😂👍🏼 ty !
Can I brick the clutch in and do that? XD
Yes make sure is not on gear
@@nestorautorepair Legend Thank you brother.
You welcome
I get no lights on the inside , no crank ?
Main fuse
@@nestorautorepair no it’s ok ! I think the mice ate a power supply
Wow ok
I'm not gay bro but I love you man🙏 you help me out major white people have me saying I need replace this I need a place that🤔 bro I love you I love you I love you 🙏🙏but I'm not gay great video💪🏾💪🏾💪🏾💪🏾💪🏾🙏🙏
Ahhahahah I love you too but I'm not gay ,, thanks for your feedback bro
@@nestorautorepair You have a great sence of humor Mr. Nestor, wish you lived near by, I would buy you a beer ( or what ever )) Stay Blessed & Keep Safe . Danny in Texas.
I don't have an automatic.
Your fix will be the clutch pedal is off or bad
I have a 1988. Either it doesn't have a clutch switch, or it's been bad without affecting the starter. (I've been able to turn the engine over with it in gear and my foot off the clutch pedal.)
Try to start it like I did
Thanks bro. Life saver haha
Safety neutrai switch
Thats crank position sensor
Ok
I tried this on my 2000 jeep and it didn't work😢
I don’t know u
Ni yo