DIY - 2014 Kia Sportage 2.0 CRDI: Change the front lower engine mount

While chasing a low-frequency noise audible especially when the front-left wheel was loaded, we discovered that the front lower engine mount on our Sportage was pretty worn out and likely to be at least part of the issue. Replacing this mount is an easy job, though care should be taken if the car is very old, as some of the bolts may be rusted in place and potentially difficult to remove.
The OE code for the lower engine mount: 219502S000
Disclaimer: This video was made in the hope that it will be useful to other DYI-ers that work on the same vehicle model. The author of the video is not responsible for any kind of personal injury, property damage etc. that may arise if anybody tries to perform the same job on an identical or otherwise similar vehicle based on the contents of the video. Every DIY operation performed on your vehicle poses direct or indirect safety risks to you and those around you. Before attempting any such DIY job, please make sure that you have all the necessary tools, support and confidence to see it through successfully.

[@junaidsaeed2013]

I have a 2012 Sportage 2.0 CRDI in Australia. My problem is that the dub-dub sounds and vibration appear at nearly 80-90km/h. Also, sometimes at lower speeds ~40km/h, when I brake and turn left, my foot can feel the car going dub-dub. Gonna have a look at the mounts.

[@aladdinalboni2352]

Hallo was macht es wenn kaputt das

[@TheMissingBolt]

Bitte schauen Sie sich die Erläuterungen ab 19:32 Uhr an. Wenn dieses Teil kaputt geht, werden mehr Vibrationen über die verbleibenden zwei Motorlager auf die Fahrzeugkarosserie übertragen. Dadurch verringert sich der Fahrkomfort und auch die Lebensdauer der anderen Motorlagerungen verringert sich, da diese zusätzlichen Längsschwingungen ausgesetzt sind.