Rebuilding $10,000+ of Lamborghini Frame Damage Using $22 in Aluminum Bar & Harbor Freight Tools
Вставка
- Опубліковано 10 чер 2019
- Get Paid 2 Days Early w/ Current: l.current.com/Samcrac
vTuned helps repair a TON of parts on the Salvage Lamborghini Gallardo LP560 Spyder Rebuild Project! When we're done, we'll likely have one really cheap, if not the cheapest Lamborghini ever...
Special Thanks to:
Vtuned: goo.gl/e32Qe9
FGP Stuff (Lamborghini Body Parts): www.fgp-stuff.eu/
Eastwood (Auto Body Supply)
TIG 200 Digital Welder- www.eastwood.com/tig-200-digi...
Panoramic True Color Welding Helmet- www.eastwood.com/panoramic-vi...
Instagram: / samcracc
Email Me: SamcracAuto@gmail.com
Mail: Samcrac
PO Box 713
Odessa, FL 33556 - Авто та транспорт
Special thanks to Current for Supporting our Project and NOT Charging DISSERVICE FEES!!!! Check them out here: l.current.com/Samcrac
Samcrac awesome!
Imaging living in a country with banks that charge you to give them money
Those "dents" are crumple zones so that 4 foot long piece of metal doesn't go through the cabin and the squishy insides. They need to be placed back into the structure. If hit head on that piece will deflect off the dash core and through your heart.
@@anzacxlag2606 Switzerland? I thought they had negative interest rates right now.
When finished are selling it?
Someone tell Vtuned that dent in the cross brace is done on purpose. It is designed to crumple at the point on purpose.
It terrifies me that a frame and body guy doesn't know this....
Instead of glancing off the pillar into the drivers chest?
proslice56 ua-cam.com/video/Z1dtOAGD0pk/v-deo.html
ua-cam.com/video/Z1dtOAGD0pk/v-deo.html super interesting!
"best frame guy in the country" lmao
The dents in the bracket are made to make the bracket deform and absorb energy in a controlled manner in a crash
Anders Kjelgaard I find it hard to understand how this is the best body guy in the country if he doesn’t understand this basic fact. Maybe he is the best cheap shade tree body guy for flipping totaled cars....
@@fredfrederick5607 This is just one example of why it's typically a very, very bad idea to buy a "rebuilt" car. The folks that "rebuild" these cars aren't engineers.
Anders Kjelgaard he doesn’t care, will flip it asap
Glad to know. Now to all who are making negative comments, just dont buy a rebuild car. Please buy a new one that's up to standards.
@@kikehdslr he's making those indentations, so he does care.
The "DENTS" on the other bracket are part of the cars crumple zone for colisions you just made the one side less safe.
It's safe enough to make a UA-cam video and his lawn ornament.
Most people would rather die than see the repair bills for a Lamborghini anyways, so it's all good.
thesparewheel
Isn't the crumple part the black section that runs across the front and ties to the to sections parallel to the ground?
People are pretty emotional on that topic. He actually “softened” the dented aluminum beam. As soon as heat and mechanical pressure is applied, the beam loses its original strength... The main problem is that the whole body alignment changed. That might or might not cause issues.
thesparewheel this cars already going to crumple in any real collision lmfao. These idiots are rebuilding a Lamborghini DEATH TRAP. The driver will almost certainly die in a front end collision seeing as that front end box frame cannot be repaired and still safe. Only replacing it will make it safe enough to be driven on the road.
If you get into an accident your probably gonna get a frame through your torso. Be careful man.
Sizza FN why?
@@stevewall6811 Too stiff to crumple in case of an accident, IMO.
Ian Taylor in the factory piece there are dents in it ment to absorb energy in a way that doesn’t spear you in the stomach.
@@stevewall6811 Frame rails are engineered to have weak spots, which would in a collision cause the frame to collapse instead of just busting through the material in front and getting to the drivers seat. Sam and Vtuned didn't put those in so the new aluminum bracket would probably just go through the driver. That was a famous problem with Jugo 45's as they would cut your legs off in a frontal collision.
@@stevewall6811 He mentions the weak spots i refer to at about 11:45 thinking they are frame damage
Next video: HOW I SAVED THOUSANDS $$ BY REPLACING MY GALLARDO’S BROKEN FRAME WITH A 2x4 FROM HOME DEPOT!!
I hope VTUNE is GETTING PAID??? And I mean several thousands!!!! Looks like SAMCRAC is becoming SCAM CRAC. Hmmmmmmm.
Dumb
joe rodriguez PAID? For making a death trap? Are you stupid or are you stupid. I only pay for CORRECT REPAIRS. Not someone turning my 2017 Lamborghini into a death trap that’s going to kill the occupants in ANY accident.
Whit...Dont forget the wooden wheels as a replacement for OEM...Its the newest "Trends"......Hahahaha!!!!!!
@@joerodriguez1982 lol sam crac on dat crackkkkk
You definitely need those crumple zones in that bar you made
Soho Khan why?
@@blakemanon6314 Because it's gonna act as a spear to either you or the person you crash with or it's gonna snap which is not what it's suposed to do. It's suposed to absorb any force pushing it, so less of a force is impacting the driver.
Blake Manon it’s 1/10 as strong as it should be and will snap like a twig and get someone killed. That’s why. This car isn’t road safe with these frame “modifications” NOT REPAIRS.
Fuck that. You are the crumple zone
They crumple rather than jam that pce of aluminum into your chest. They act to soften the blow of a impact. Those pcs are made to accordion to reduce forces by the time it gets to passenger compartment
Best body & frame guy in the country.
Doesn't know what crumple impact recesses are.
LOL
Maybe he does n Sam told him don't worry about it. Do you really think he thought somebody from lambo "jumped on it"?
rage12345678 am I right? I’m a fabricator and don’t do any frame work really just tube frame work aftermarket and entire tube chassis buggies and shit but this guys most be a fucking idiot. Whoever buys this car is buying a death wish 😂
Hypernova80 you’re telling me he knew he was making a death trap, told Sam that. And Sam told him to make it a death trap? Looks like a lawsuit to me when this ones sold. Fucking death trap.
Or ya know, he was OBVIOUSLY making a joke? Holy shit you guys are fucking stupid.
Josh Larochelle biggest keyboard warrior goes to you congrats.
That dent in the original piece is designed to be in there as a cumple zone. Your piece without the crumple zone will spear the driver in a front end impact.
Yup, lets hope they never get into another accident. If I were to replace the front crash structure I'd just go with tube frame.
They don't give a damn about safety. These channels earn close to a 10cpm so based on the SocialBlade monthly views alone net him close to 50k a month in ad revenue. That is the secret to all these big rebuild channels and how they really profit.
@@JP-fo6lo "Secret"
The car literally has 4 frame rails to absorb an impact in the front so how will this piece spear the driver?
You definitely did not read all these comments on Vtuned video and decide to post it here to make it look like you know what you're talking about...
Are you going to address the substandard repair of the front bar. The crumple zone for safety was placed in that bar for a reason.
Nah. Looks like this is the new way to go. Going to replace shock absorbers with metal bars in the future.
P.O. well if this car is sold and crashed it will kill someone and sam and the vtuned kid will be on the hook for a multi million dollar lawsuit.
If you buy a Salvage Titled Bondo-ed up Lamborghini, you already have incurred brain damage that another crash is unlikely to exacerbate. Funny how nearly EVERY Ferrari and Lambo gets totaled.
I scream at my screen everytime i them heat up aluminum and "repair" it
Guido and Paolo weren't jumping on the frame at the factory. Those from-the-factory slight creases (indentations) on the other factory-installed frame are to create a crumple area so in the event of an accident the aluminium bar doesn't slam into the diver's and/or passenger's chests.
Samcrac. The type of guy who loves comments telling him “awesome job and car”, but ignores the multiple comments that address the lack of a crumple zone in their fabbed up frame rail.
If you want to get shadow banned from youtube channels tell them something helpful from personal experience that they don't want to read. There are some of us comment from years of experience in a trade but don't film our whole lives they like to call armchair experts to. Personally I have no interest in setting up camera's, editing and asking my customers to film. They mostly want their stuff kept private and me working every hour I bill to get it back working in the field not dicking around with this stuff for youtube.
After a few years round here you soon get to know the ones that don't have the ability to figure out that a guy knows his stuff from the comment, or are just looking for the how wonderful everything they do is and can't take constructive criticism or advice. some just mine everybodys knowledge from out the way forums then come here and say it's their idea to build something or fix it, I know one tuber does that on a forum I help out on sometimes. I see his posts then a month later you can guess exactly whats going to be his next build or he's buying for a video. You can learn a lot of interesting helpful stuff here and figure a lot out about people to L.O.L
@@super6954 well said! I was looking for a comment like this!
came here to see VTune comments about the crumplezone. DID NOT DISSAPOINT
I hope VTUNE is GETTING PAID??? And I mean several thousands!!!! Looks like SAMCRAC is becoming SCAM CRAC. Hmmmmmmm.
joe rodriguez paid for work makinng the car unroadworthy and unsafe?
@@joshlarochelle1298 Vtuned has replied to a different comment and said he is going to add the dents because of all of these comments.
Hi Sam u mounted the fan wrong watch ur video
I love how he's remade that aluminium part, but the dents are there to crumple in a crash, otherwise you end up with a spear being shot in to the car.
I, too, can read one of the other hundreds of comments and regurgitate the same information.
What the actual fuck is wrong with UA-cam comments...
Dr. Stephen J. Krune III I wonder if that is you’re real name you’re using. You fucks act like this one bar is going to instantly kill someone in a crash. It’s very unlikely that would ever happen. Also “the next driver” of this reconstructed Lamborghini would have to be a fucking moron not to have it inspected before buying it and if he’s not well maybe it’s just natural selection at play.
Amazing that after watching V unravel crumpled cars and producing gems, he get's his 1st lesson on tig welding on the fly. Great work guys!
Here in Michigan we save thousands of dollars on our wrecked car Repairs by just drive them smashed 😂
Someone get the fainting couches ready for all the keyboard engineers, I have a feeling they're going to be needed.
Keyboard warriors: "OMG THE CRUMBLE POINT!!...WORST BODY GUY IN THE COUNTRY"
hahah its so funny for sure. If ppl would watch his channel they would know he explains them and fixes them on the mustang builds. I laugh at their sarcasm, "Someone jumped on it at the factory" haha
el oh el! 👍
ILL HAVE YOU KNOW IVE BEEN WORKING ON BROKEN LAMBORGHINIS FOR 69 YEARS AND ONE THING I CAN TELL YALL IS THIS THANG IS A DEATHTRAP SUPERMISSILE THAT I PERSONALLY WOULDNT TRADE A PACK OF FUNYUNS FOR
@Chris McRoy yeah but your road runner is POS and it doesn't go past 80mph so it would bw safe
I love your comment, the keyboard engineers come out of the woodwork. The guy clearly knows he is doing low end shoddy work, he never claimed otherwise. Just enjoy the show, This is a cheap rebuild of course there are going to be shortcuts taken, besides if it was "high end " repairs the video probably would have gotten half the views.
That’s awesome you guys fixed the front end. I watched vtuned build it on his channel. One very important step was missed though you should put the creases in the new aluminum Just like the factory side. They are there for a reason If you crash you may be impaled by it. No air bag can save you from that my friend.
Big respect to anyone whose first TIG project is repairing a Lamborghini chassis.
"My Jetta has the same thing" AHAHAHAHA I literally died, love vTuned
Love your videos keep up the great work
Frame no longer cracced.
RMG if he crashes it his body will be cracced
Kaif Din agreed
All the technology in the world today...…...and people can't spell for shit. Are you trying to say cracked or creased?
@@tomkurtzhals7369 loool bro it's a joke, it's from Sam CRACC's name. Chill out
@Kaif Din loooool bro you win 😂😂
Aww man! I thought we were connecting with that story about your first job and then you hit me with the ad! I should have known not to wear my heart on my sleeve with you Sam.
Watching vtuned work is a real joy!! Vtuned is a real talented young man and an example of dedication and attention to detail on everything he does.Keep on doing a work of excellence 👍👍😎
Custom super car incoming!
How’d you comment an hour ago¿😂
Skill
Haha that killed me.
Pie 4life sounds good to me
@@Vtuned Savage
I didn't realize that I was watching an ad until the current logo popped up. That was an impressive way to transition into the ad Sam!
You say impressive, I say deceptive. Thumbs down.
Let's hope this car doesn't ever get into a front end collision or else that DIY hack u use will end up killing the driver and those dents on the frame rail are there for a reason.
Archaestra No inspections in Florida baby!
Lol, y'all are way to serious😂
@@kncz2812 better he safe then sorry
@Chris McRoy who shit in your blow of cereal today
Excellent work vTuned!!
... and that's why you don't buy a rebuilt car. Just imagine the shortcuts and botches that dudes named 'Cornbread' will make.
Many rebuilt title cars have had no frame damage and only cosmetic damage. They can be great deals if you have all proof of repairs
@asd fgh No I'm talking about ones with no frame damage
Those "dents" aren't from someone "jumping on it at the factory." Credibility went down the toilet with that comment.
My guess would be that was comedy for comedy's sake. Obviously he isn't a moron.
@@ryfish5 I think he is and that is even scarier.... 🤐
Exninja your credibility went down when you became an ex ninja. He was obviously joking. Twat
I guess you didn't notice the smirk on his face when he said that. :-)
He corrected his mistake in a new video. Kuddos for that. Had he been "joking" he wouldn't have called it a mistake.
This is one of my new favorite channels! Your content is awesome. I love watching stuff like this. Seeing a not so beautiful salvaged Lambo become beautiful again. Bringing her back to all her glory!
11:45 Crimps to the direct bending in the event of a front collision to soften impact !
Kids a fucking hack . “best in the country” hahahahaha
A little annoyed that neither you nor Vtuned credited the welder but thanked the machine and it’s manufacturer.
I don’t care what kind of welder you have, getting welds that clean and on aluminum takes skill. Props to that guy.
obviously they're a sponsor, and if not they have helped him with a bunch of projects anyway which is why he's shouting them out...
I notice that nice job guys take the credit your self but don't say shit about the person who actully dit the only bit of good work in the whole vid
You guys obviously have never seen someone with skill weld aluminum. Keep practicing dude you'll get it.
True true!!
Hey Sam when u stripped rad fan off it was facing bottom right hand corner but when u reassembled it it's facing bottom left corner
See when he flippped it around...open...your .....eyes.
Just started watching, and I’m loving the videos man! I’ve been binge watching old videos lol
Couple of thoughts. First off CLEAN THE USED PARTS!! Seeing you reuse that fan shroud and used fan without even wiping them down made my OCD go nuts. Secondly Im really questioning any shop that uses a PROPANE torch to try to heat up steel or even aluminum before beating on it. Even MAPP gas struggles to get the steel hot enough.
Go watch Authur Tussik. He just rebuilt a Gallardo using the same techniques. You wouln't do this to a steel car but with Aluminum heating the metal to work it is standard practice.
@@ingresswizard9044 Ill disagree, I do ALOT of fabricating and there is a reason you have to use so many more amps welding aluminum than heat. Its a giant heatsink and sucks away heat. Aluminum is worse at heating up than steel. I dont even use propane in my shop anymore because its so innefficient. I have MAPP gas for tight spots or when Im feeling lazy but it takes FOREVER to heat up steel with it and forget about it with aluminum.
Vtuned: sits in car
"WHAT IN TARNATION"
The aluminum used - what grade is it? Have you rebuilt the crash structure with double glazing grade aluminum? I'm sure Lamborghini have a pretty precise spec for that part!
Ah fuck it, we have some scrap aluminum bar we picked up from Home Depot for twelve bucks.
For vtuned to be able to pick up Ali welding that fast is seriously impressive. Ali is hard to weld! Nice job
Awesome build keep doing wat you are doing bro congratulations
Samcrac at Sam's Club! Love it!
V-Tuned 10/10 for trolling, 'somebody from lambo must have jumped on it at the factory' 😂
if he was trolling he would have added the relief's to the frame he made. That bar they made is going straight into the drivers chest in an accident and tearing up the engine on the way.
@@Kaodusanya how is the bar they made going to tear up the engine on it's way to your chest? The engine is behind the driver...
The invitations are there to act as a crumple zone it's designed to fail at that point and not push it into the driver that's why those indentations are on the bar
The invitations are there to get people to go to parties.
"The best frame guy in the country" would know what crumple zone relief points are...
And no, he didn't rebuild it to factory specs. You know what he forgot? One guess.
"The best frame guy in the country" might have told you to choke down the cost of a new bracket, rather than risk his own livelihood building something that, in a collision, instead of folding and dropping down, will probably shoot at or right past the driver's head.
How in the WORLD does someone that does so much frame work, and sees the frames folding at those relief points, not know what they are?
Even the Focus has them on the frame rails he patched!
Talonts kids a hack job. Any beginner fabricator understands this shit lmao
samcrac, be careful, the little dent in your replacement bar is a calculated weakness in case of frontale choc, in this situation the bar will bent there and not on your knees.
Antoine Thouvenin lmaooo
Vtune sounds like that kid froggy fresh who has a song called Krispy Kreme 🤤
I believe his name was originally Krispy Kreme (2012) before a copyright dispute, and his song was Baddest of Them All. But yes he does sound like him
Holy shit, I wish there were 10,000 comments telling Sam that dent is from the factory to be used as a crumple zone otherwise he's gonna DIE!!!!!!!!!!!!!!!!!!!!!!!
Yeah that "wrinkle" on the other side keeps from becoming a kabob
Casual Motors 🤣😂🤣 thanks. Exactly what I was thinking....
If Vtuned is the best body and frame guy in the country, then why does he not know what crash protection is? And why does he sound like he didn't get past third grade?
The way he talks is annoying as hell
@@paulloper8333 yet here you are. If it's so awful to watch, why are you here? Dumbass.
Sam, please dont start losing your credibility by repeatedly botching rebuilds. This is one of them... Not every cheap solution works and is safe, especially with a sportscar.
Not every decent weld is a fix. Keep that in mind if you want to avoid a shitstorm in the future...
DSP or lawsuits seeing as if you left this car like this and sold it and it killed someone it’s on you.
Too late for that. Crac the hack is legally exposed on every one of these bodge jobs which has not been surveyed and approved by an engineer.
Auto cad maybe could be used to simulate the repair of the Audi as for the dentvin the frame rail I'd think maybe something like press to put digit in it.
Pretty sure the car will be sold, if sold under a salvaged title and as is and Sam Crac will have = Zero liability
@M J Most states when it comes to private car sales in the US are buyer beware, it's on the buyer to do the proper pre-purchase inspections. To even get it back on the road it has to be inspected by the state and deemed fit for road use. Which it's then issued a Rebuilt title. Some insurances won't cover these cars but others will insure it no problem with regular coverage. It would also be on the buyer to prove the repairs were negligent if something did happen. Even with videos I don't think he is willing telling people to cut corners; I've rebuilt some cars and the reality is its never going to be 100% unless it's purely cosmetic.
It's so good to see young guys showing so much skill in fabrication work!!!
Love the attention to details.
Now what we want to see is Pizza delivery car made into Lamborghini car in under a week. And everyone knows R is for Rockets!
Shocking! no way would I let that lambo get on the road.
"Best frame repair in the country" HAHAHAHA yeah right
you the same guy who said that about the R8???
Go replace the fart can on your crappy civic.
@Charlie Vetsworth The person doing the rebuild does it to resell it later. This is how sam does it, If you follow his channel you will see the pattern. Stop insulting people here because that makes your argument null. Lex is right about sam's repair. As for now this repair looks afwully shady, with cheap aluminum grade and no crumple zone.
Charlie Vetsworth ooohhhh bit touchy.
If it was repaired properly, yeah great, saved a good car but a cheap shitty repair can kill people and I bet it will be sold some day. In Europe that wouldn’t pass any test to give it a clean roadworthy title.
robert gorham had a civic once, was an awesome car and much safer than this shitty lambo,
Shout out "Sam & V tune" coming along Great. Smart thing sourcing out Audi parts like the fan 🙌💯. Salute Guys 😎
Sam, you never add the fact that towards your budget specifically, you use the rebuild to make videos which you earn revenue from. This could make an "unsuccessful" rebuild create a positive youtube viewing. Also by rebuilding a lamborghini, which is currently popular since other youtubers are rebuilding them, you are really benefitting from this.
You should at least drill a series of maybe 1/4" holes in the fabricated aluminum tube in the same area as the "dent" is in the other one so it will buckle in the event of a crash and not push into the firewall.
It is aluminium (not "aluminum") not weapons grade tungsten, it will bucle anyway and not shoot through the firewall like some rocket..
@@jerryvr In America it is indeed spelled "aluminum." Whether it buckles or penetrates in a crash all depends on the attachment area at the firewall - if it is beefed up, the tube may buckle in a collision, if thin aluminum, it may penetrate.
Wow! First time driving a Lambo! Goonsquad didn't let you take the lambo for a spin on that long road trip?
Cleary no one in this group understands VTuned's humor, Jesus
Who the heck is goonsquad?
Goonzquad
@@baja9326 Lol ur missin out
baja who the fuck are you? You watch these fucking idiots but not goonsquad? They are young kids just started out on mechanics doing 1000x better rebuilds than these dumbass adults like samcrac and taverish and their kid accomplices like vtuned.
The damage to the original brace was exactly where the top and bottom staggered crumple zones were designed into the brace for safety. The new brace is going to cause serious problems if the issue of crumple zones is not addressed.
fee magnet banks. great ad slip in. 👏👏👏👏👏 good stuff smacrac
2:46 Start of video post paid promotion
"Hey, how do you drive this thing?"
"Who's asking"
"Your ace mechanic"
Is someone a little over their heads here? :>)
Love the vid dude keep it up😊
I see a lot of comments on the crumblezones and I agree. All (serious) car manufacuturers put a lot of money into developing crumblezones to absorb the most amount of energy as possible.
There´s a lot of car crash tests and engeneering that goes into this. Altering or changing this without any regard to safetyaspects is reckless, and even more if you intend to sell this car to some else. The design of rods and dents is there for a reason. If there´s a crash and someone get hurt, do you think any of the manufacturer or insurancecompany will take responsability after the car has been altered?
I like what you do with the car but the safety must come first, especially when it comes to a supercar!
I'm cracking up just looking at the title. When you buy a salvage car and they say all the work was done right 😂
Drink a beer Every time you read *CRUMPLE ZONE*
have a designated driver please
these comments about them are providing me so much laughter though..ppl really be salty af
Yes as if you crash you could be hit with a $20 bit of aluminium
Richie "I have a day job" Rich has cracked me up. He now calls you Sam the snake. You guys are so funny. Keep up the great videos. 👍👍👍😎😎😎
Really cool - can't wait to see it finished!
I love the Lamborghini project
Samcrac is in the commercials in his own videos. How do you work that deal? #doubledip
vTuned is a artist, always love his work, this guy is super talented, for his age he has mad skills.
The dent in the structure bar is a weak point or crumble point so that when the car has an accident it's designed to crumble rather than push it back through the fire wall
Lamborgini parts look just like any other car part but because of the name they charge 10x more. good vid sam.
It is true but driving a lamborghini as an experienc it has to be special
@@kertjj3522 I can only imagine :-( yeah agreed, but as Sam points out they are mostly Audi parts.
The company itself doesn't make most of the individual parts, so yes, it'll be a starter from a VW, a fan from an Audi, ignition from Bosch or some other German company... all with their blessing and markup. The real problem is finding out who made what on the car for replacement parts. I used to have this problem years ago when I had my Mercedes. Mercedes doesn't make ANYTHING electrical - but wow what a headache figuring out who did.
First off, I respect Vtuned's work, he does amazing work. This however is a hackjob, because you are too cheap. The new alloy is guaranteed not to be the same strength ( something that is calculated for a collision in the engineering phase) , the dents in the old one are for folding in a collision which are now missing and now when it comes time to sell this car, it has fiber glass bumpers and home made repairs.
Sorry dude, this is the kind of work you do on a Chevy Spark, not a Lamborghini
I really hope he doesn't sell it even if the person buying it has seen the videos
Yes I immediately worked about that brag of $22 of aluminium. There's loads of different grades of aluminium out there, and the right one was designed to meet crash standards and meet rigidity goals. There's so many of these Lamborghini rebuild projects on UA-cam atm, I worry the quality of the original car has never been captured by the repairman to know what he's doing.
He did say the aluminum and was from a Lamborghini dealer
@@jm100368 Pretty sure lambo dealers don't sell $20 aluminum bars...
@@jm100368 Lamborghini dealers don't sell alloy beams... LOL
funny how most people think that a person who does auto body for a living doesn’t “know” what the dents on the frame was
like how he was joking of the windshield washer and such.
That kid has more knowledge than anyone here because he is running a bloody shop and we are just work. 9-5
great work.
As a guy with just a thumblefull of car knowledge, I really appreciate how you break down these repairs!
This isn't a repair. It's a botchjob. This is just entertainment, don't teke anything from at least this series as teachings.
Anyone else here questioning what type of aluminum they used. Not all aluminum alloy are created equal.
Over 1000 comments saying dents are crumple zones.Just like vtuned video.
yet still not adressed ,basicly stock what a joke.and liability! if you cant afford to do it rite can u afford to do it again?
Samcrac the kind of guy that would rather spend $12,000 on a funeral than buying the right frame part with crumple points
Always amazing to watch ✌ samcrac
Samcracc films with the nicest camera on UA-cam. Looks like he's in 64k
😹😹
If Sam sold or registered this car without the cars crumple zone on that tacky frame, he will be an unprofessional scammer!!!!! He should absolutely fix that frame in the video.
Chamquila unprofessional scammer? He’s not a car dealer or a car mechanic. He’s fixing up cars purchased for himself. If he sells any of these used/ reconstructed vehicles it’s on the buyer to do his due diligence and anyone buying a reconstructed Lambo that doesn’t get a PPI done is a fucking idiot.
@Chris McRoy You won't be saying that if someone ever sold you a cheaply made product for your honest money.
@@mcearl8073 If you ever got the PPI done should know how little they actually inspect the car. I'd be surprised if they look into that frame at all. If you look at his previous videos, he actually has sold cars after fixing them. I understand that it's a buyers responsibility to do his due diligence, but if you ever purchased or sold a rebuild car know that people usually don't remove fenders and headlights to carefully inspect a vehicle. Also, who's responsibly doing what is not always the answer to everything. Code of ethics is still a thing among the honorable men.
@Chris McRoy While we are arguing about whether he should or should not put the crumple zone, Sam has already fixed the issue. Secondly, If it's not a big issue for you, doesn't mean it's not an issue for other people. If you are buying a salvage title car, you should fix it with factory level repairs in mind. Especially, if you are going to sell the vehicle to somebody. If you are comfortable with "half ass" job, it doesn't mean everyone else should compliance with such a treacherous job. Lastly, name calling someone retard and petulant child rather than making a sensible point shows you don't have a valid argument. If someone ever sells you a car with a shady job for your hard earn money, you'll have a different opinion.
Chris McRoy calling people stupid makes you stupid. You know, you don’t have an argument!
Highly appreciate the deep house in these videos.
Loving this build and team effort
"Except it doesn't have these dents in. I guess somebody jumped on it at the factory." :)))) All the other beams nearby also have dents. Come on, you're just yanking our chain, you gotta know that those are there on purpose. You decided not to bother putting them in because the aluminum piece you got is not quite the same anyway, probably weaker, so you are guessing there is no need to weaken it as it'll crumple anyway, somewhere. But who cares, it matters not, it'll be a pretty car regardless and you are not going to crash test it anyway. :)
What did the framerail say to Samcrac's spine?
Nice to meet you
Haha I get it, cause of the "dent"
Vtuned is a Beast! one of the best Body Mechanics on uTube
Doing such a repair without crumple zones is going to get someone injured or killed if they are in an accident. At least now you have documented proof of cutting corners so their family can sue you. Smart, very smart. How does "the best body Man in the country" not know what safety crumple zones are and their purpose?
“mY jEtTa hAs tHe SaMe kEy” 🔑
That’s a mega oof
No shit its all the same parent company
It's basically a Audi R8 without the Audi emblem. The whole electronics and drivetrain are from the R8.
With all the shops being trained by Ford to work Aluminum, It's going to get easier and easier to fix these panels.
Looking good Sam!
Looking great! Not loving that front end, though.
is this tutorial on how to get killed in a car crash?
Fuck him, what about the innocent people that could crash into this car and get hurt because hes a fucking idiot who doesn't care about safety just to safe money.
unluko should be. “What not to do as a fabricator” or “how to ruin the structural integrity of a huracan” or even “how to make a death trap” 😂
This much work DIY Gang does in 20 videos
I like the collaboration with v tune makes it very entertaining .
There are still other free bank accounts. Especially from Credit Unions.
I've never had a fee based account, most only require a minimum balance of like $1000
Love my credit union
@@fordcougar99 so many don't have 500
the Current link doesn't work. "400 Bad Request. The plain HTTP request was sent to HTTPS port".
Because it's a scam
"if we bought the part and sent it to a shop"
As you're standing in a body shop 🤣
the real MVP was the aluminum welder, the man not the machine and he wasn't even credited
Wow! Savings of $9,978!