this is what it s allllll about right here !!!!!! Before i sold my house, i'd be chilling. Next thing you know I was changing clothes and out back within minutes building some shit !!!! I didn't give a dam what time it was. My whole neighborhood knew my favorite hobby and i had zeroooo complaints, only compliments when it got turned on. I had ad an asian dude who lived next door who was like 100 years old who barely spoke english and couldn't hear shit for shit, but when i cooked up something with some serious bass, he'd stick his head over the gate, smile and throw me a thumbs up !!! LOL. hahah
Summary: "I won the neighbor lottery". Haha. for real though, keep building. I know the feeling that creating brings. As you button up that final detail and the satisfaction just pulses through your veins... Just waiting for someone to ask, "Where did you buy that?"
in my younger adult life I was in to subwoofers and amps. Around the same time I learned how to do electronic repair. At the time I owned a small hatch back car. I had four 12 inch speakers in hatch area with an amp attached to the rear seat in the hatch area of course. When playing music the rear view mirror and side mirror was 100% useless. One night went to a fast food place and used the drive-thru. I was playing music and had the car thumping very hard few workers stuck their heads out of the drive-thru window and looked at me. I out grown the whole subwoofer + amp phase and ended up selling it all off long time ago. I'm getting up there in age so my taste of music goes more on the country side now.
I run two 12s in a sealed box on 600w rms/"1200w max and I love the way it sounds on all music. I also upgraded the 6.5's, 6x9s and 2" tweeters and replaced the factory head unit. Rap, techno and heavy bass are awesome, but bringing the bass level up all sorts of music sounds good too!
I'm 45. I've been into audio systems since I was 10. I had the big SPL system at one time. Now, I focus more on my home theater system. Id actually love to have another SPL system, but it's not on my priority list at all. I still enjoy watching these videos and keeping up with current products. Its still fun, even though it's easy to get loud nowadays.
A lot more work goes into a box like this than many people think. Building a good box is way more effective than spending tons of money of subs. A great box can make even crappy subs bump. Hell, I bet if you put Pyle subs in that box, they would sound okay. Although, putting Pyle subs in that box would be like putting vienna wieners on sourdough hotdog bun.
Sure, then they blow because you sneezed at the some time the coil was going out of the gap! “Effective” is subjective, what is the goal? More expensive (there is a threshold) subs give you many benefits and the same goes true for them as well, “expensive” subs also thrive in a well built proper sized and properly tuned enclosure! In SPL, cone area and watts are king!
@@commonsenseisdeadin2024 Yeah, a good box won't make a cheap sub handle more power. But a crappy sub in a good box will sound better in a lot of cases than a good sub in a crappy box. But yeah, in SPL power is king and cheap subs and lots of power don't mix, at least not for more than a few seconds before the magic smoke pays a visit.
@@BlenderRookie there's a balance, there's also the fact someone who spends $1,000 on a sub isn't going to spend only $20 on a box...... HOWEVER, someone who spends $50 on a sub will ONLY spend $20 on a box 😂 Cone area is just as equal as power; You double the cone area, +3db........ You double the power, +3db! I'm practice for me, that has held true..... It's a good rule of thumb but it's not THEE rule!
@@BlenderRookie if you take a cheap sub and build a solid enclosure with less net air space than the VAS of the sub you will be increaseing the strengrh of the suspension allowing the sub woofer to handle more power before reaching xmax
Very nice awesome craftsman ship it's always in the small detail's that make the most differences. 💯 i love it knocking pictures off the walls for sure. 😮
Nice build man. You stay in Florida? I’m down south in Homestead. I have a Silverado as well with a custom 6 cu ported box, tuned to 32Hz. Love me some baaaaassssss. lol. Enjoyed watching your video. Keep it up.
I love building boxes and run a 6th order with 2 dtx dreamsicles and your do a great job and have skills but if you step up too the x z or nightshade serie you should double up all your wood so all walls are 1.5” and make your baffle 3 layers 2.25 . I still brace but you can brace a little bit less having 1.5” walls. I buy titebond bungee galllons and Might need a couple homies loading it though. lol
@@clittle1559 also going to want to port that closed off section 😂 ESPECIALLY with that small of a chamber! Going to either blow the box or the cones, given how much he braced that box, my money is on cones! (Dust caps will for sure blow off first dig!)
I think my baffle is currently 5 layers…… (started with double baffle with 2 15”s, to 1 15” which I double baffled on top, then cut it for 1 18” , then another baffle back to 1 15” 😂)
What is this installed into? A truck? Can we see that part of the build? I am wanting to do a blow through but not sure on what to expect as far as spl levels compared to a SUV or other non blow through. Like how much is actually lost from them seam between bed and cab?
I’m not sure that box is strong enough for them subs! What’s the tuning? (You might have said but I couldn’t hear well because I turned it way down because all the router SCREAM scenes!!)
Great job just a word of advice from experience. Try using a flush cut bit with a bigger drum on that quarter inch collar. It cuts a lot faster and cleaner I started using a fatter flush bit and so much easier. Keep up the good work.
Steal?? Also an all steel body will sound like a rattling tin can with the amount of bass not to mention become a literal death trap due to the lack of crumple zones, it’s a proven fact older cars are more dangerous due to the lack of crumple zones!
you just killed the value of that truck by thousands for a speaker box wtf love my system but I will give up a seat before I cut the truck apart just like a lift kit where you have to cut the crossmember if you ever plan to sell DON'T cut anything unless you have enough money to burn because a $40,000 truck with bed cut or crossmember is now worth $20k I will never give away 20k for speakers or lift but nice job should use screws though just my pref.
That is why true bass heads run a clapped out pos with more money in the system than the ride itself. When I was competing I would see the best 500$ money could buy pos hatchbacks being pushed off the line all the time.
*Cops hate all bass. It doesn't matter if it's coming from a good enclosure or a shitty one. They've hated bass since at least the early 90's. Ask me how I know... 😂
I was curious was it fourth or sixth order. I have the same design in my car, and they told me it was a sixth order, but i felt it was a fourth order. Either way, it bumps harddddddd. I get thumbs up all the time when i crank it up. Buttt at the same time, if you a stereo shop, you suppose to know your shit. LOL
I cant believe you spent that much time on plywood, with it's inconsistent rigidiositty. Why didn't you just use MDF (medim density fiber)? Rookie mistake. Pay more for noticeably better results. You have created "good", when it could have been "great" for a few dollars more.
If he used a high grade plywood, there should be very few to almost no gaps or voids. Baltic birch plywood is a void free 13 layer ply. I believe weight wise, its very comparable to MDF while being more durable. That said, i dont think he used baltic birch but it didn't look like it wasnt a bad quality.
Tell us you don’t know what you’re talking about without telling us you don’t know what you’re talking about! (Granted THAT plywood, I don’t like to use)
100%! Not “birch” from Home Depot (like he used in this) the hardwoods plywood at HD (and the like) is MDF core, can’t remember the other 4 layers and the thinnest veneer of whatever wood it says on the tag! Baltic birch 3/4 plywood is all birch and is 13 layers (maybe 11, too lazy to look) and is also significantly lighter!
To Enter Taramps Giveaway Buy Shopping at
themousetrapstore.com
I love your videos
this is what it s allllll about right here !!!!!! Before i sold my house, i'd be chilling. Next thing you know I was changing clothes and out back within minutes building some shit !!!! I didn't give a dam what time it was. My whole neighborhood knew my favorite hobby and i had zeroooo complaints, only compliments when it got turned on. I had ad an asian dude who lived next door who was like 100 years old who barely spoke english and couldn't hear shit for shit, but when i cooked up something with some serious bass, he'd stick his head over the gate, smile and throw me a thumbs up !!! LOL. hahah
😂❤this was beautiful story mate ☝️💪💥👍 keep basing 🎉 I'm nearly finished mine ❤ soon soon 🎉💥
Summary: "I won the neighbor lottery". Haha. for real though, keep building. I know the feeling that creating brings. As you button up that final detail and the satisfaction just pulses through your veins... Just waiting for someone to ask, "Where did you buy that?"
in my younger adult life I was in to subwoofers and amps. Around the same time I learned how to do electronic repair.
At the time I owned a small hatch back car. I had four 12 inch speakers in hatch area with an amp attached to the rear seat in the hatch area of course.
When playing music the rear view mirror and side mirror was 100% useless.
One night went to a fast food place and used the drive-thru. I was playing music and had the car thumping very hard few workers stuck their heads out of the drive-thru window and looked at me.
I out grown the whole subwoofer + amp phase and ended up selling it all off long time ago.
I'm getting up there in age so my taste of music goes more on the country side now.
I run two 12s in a sealed box on 600w rms/"1200w max and I love the way it sounds on all music. I also upgraded the 6.5's, 6x9s and 2" tweeters and replaced the factory head unit. Rap, techno and heavy bass are awesome, but bringing the bass level up all sorts of music sounds good too!
I'm 45. I've been into audio systems since I was 10. I had the big SPL system at one time. Now, I focus more on my home theater system. Id actually love to have another SPL system, but it's not on my priority list at all. I still enjoy watching these videos and keeping up with current products. Its still fun, even though it's easy to get loud nowadays.
A lot more work goes into a box like this than many people think. Building a good box is way more effective than spending tons of money of subs. A great box can make even crappy subs bump. Hell, I bet if you put Pyle subs in that box, they would sound okay. Although, putting Pyle subs in that box would be like putting vienna wieners on sourdough hotdog bun.
Sure, then they blow because you sneezed at the some time the coil was going out of the gap!
“Effective” is subjective, what is the goal?
More expensive (there is a threshold) subs give you many benefits and the same goes true for them as well, “expensive” subs also thrive in a well built proper sized and properly tuned enclosure!
In SPL, cone area and watts are king!
@@commonsenseisdeadin2024 Yeah, a good box won't make a cheap sub handle more power. But a crappy sub in a good box will sound better in a lot of cases than a good sub in a crappy box.
But yeah, in SPL power is king and cheap subs and lots of power don't mix, at least not for more than a few seconds before the magic smoke pays a visit.
@@BlenderRookie there's a balance, there's also the fact someone who spends $1,000 on a sub isn't going to spend only $20 on a box...... HOWEVER, someone who spends $50 on a sub will ONLY spend $20 on a box 😂
Cone area is just as equal as power; You double the cone area, +3db........ You double the power, +3db!
I'm practice for me, that has held true..... It's a good rule of thumb but it's not THEE rule!
@@BlenderRookie if you take a cheap sub and build a solid enclosure with less net air space than the VAS of the sub you will be increaseing the strengrh of the suspension allowing the sub woofer to handle more power before reaching xmax
Very nice awesome craftsman ship it's always in the small detail's that make the most differences. 💯 i love it knocking pictures off the walls for sure. 😮
Got meanass subs and 7k amp, but totally need to up my box game. Thanks for sharing. 🙂
I love blow-thrus....the ONLY way to get bass into a single cab truck. Nice job.
Using bolts to make a bulkhead for the wires would seal the box better than silicone!
I spent over 30yrs building and love blow thru systems,and if the doors ain’t flexin it’s not enough😂❤
Damn, this box is nice!! I especially love the subwoofer choice you made!!
Nice build man.
You stay in Florida?
I’m down south in Homestead.
I have a Silverado as well with a custom 6 cu ported box, tuned to 32Hz. Love me some baaaaassssss. lol.
Enjoyed watching your video. Keep it up.
Damn man I'm down here in homestead also👍🏼. I want to blow thru my truck so bad but it's hard giving up the bed space too.
I love building boxes and run a 6th order with 2 dtx dreamsicles and your do a great job and have skills but if you step up too the x z or nightshade serie you should double up all your wood so all walls are 1.5” and make your baffle 3 layers 2.25 . I still brace but you can brace a little bit less having 1.5” walls. I buy titebond bungee galllons and Might need a couple homies loading it though. lol
z or nightshades the box at the very minimum needs double cubes double loading walls probably tripple cubes
@@clittle1559 also going to want to port that closed off section 😂 ESPECIALLY with that small of a chamber! Going to either blow the box or the cones, given how much he braced that box, my money is on cones! (Dust caps will for sure blow off first dig!)
I think my baffle is currently 5 layers…… (started with double baffle with 2 15”s, to 1 15” which I double baffled on top, then cut it for 1 18” , then another baffle back to 1 15” 😂)
What is this installed into? A truck? Can we see that part of the build? I am wanting to do a blow through but not sure on what to expect as far as spl levels compared to a SUV or other non blow through. Like how much is actually lost from them seam between bed and cab?
Are you going to do a cost breakdown of building the box? On your last video of this box build
I’m not sure that box is strong enough for them subs!
What’s the tuning? (You might have said but I couldn’t hear well because I turned it way down because all the router SCREAM scenes!!)
Great job just a word of advice from experience. Try using a flush cut bit with a bigger drum on that quarter inch collar. It cuts a lot faster and cleaner I started using a fatter flush bit and so much easier. Keep up the good work.
Those sundown look small bro that magnetic looks suspicious lol na just messing with you good build bro 😎
What kind of wood board is that?
this box is an awsome build but why did you use plywood i think i would of have went with PDF board but other than that great job.
U need a 1950 car... steal everything... no vibrating plastic trash...
Steal?? Also an all steel body will sound like a rattling tin can with the amount of bass not to mention become a literal death trap due to the lack of crumple zones, it’s a proven fact older cars are more dangerous due to the lack of crumple zones!
Shit I got a 2002 Chevy Malibu and gutted everything out and with 2 18”s and two 12”s the car still only weighs 2300 pounds
There are worse things in life then death... ill keep my steal casket thanks!
Wish you was in the uk id ask you to build me one for my 15s 😁
I wanna see this thing stood on end in the cab of a pickup!
VERY KOOL NICE 😎 GREAT EXCELLENT 👍 Job LOVE It
How much would it cost for me to get a box like built for my 08 crew cab Silverado
Damnit bro way 2 go ,,,nice job
you just killed the value of that truck by thousands for a speaker box wtf love my system but I will give up a seat before I cut the truck apart just like a lift kit where you have to cut the crossmember if you ever plan to sell DON'T cut anything unless you have enough money to burn because a $40,000 truck with bed cut or crossmember is now worth $20k I will never give away 20k for speakers or lift but nice job should use screws though just my pref.
That is why true bass heads run a clapped out pos with more money in the system than the ride itself. When I was competing I would see the best 500$ money could buy pos hatchbacks being pushed off the line all the time.
Nice work MT
*Cops hate all bass. It doesn't matter if it's coming from a good enclosure or a shitty one. They've hated bass since at least the early 90's. Ask me how I know... 😂
How much you charge to build one
SPL?
Nice build out of the blue you think you can build me a box ill pay
Pls song name
Thats a 4th order not a 6th
I was curious was it fourth or sixth order. I have the same design in my car, and they told me it was a sixth order, but i felt it was a fourth order. Either way, it bumps harddddddd. I get thumbs up all the time when i crank it up. Buttt at the same time, if you a stereo shop, you suppose to know your shit. LOL
@@theone148is the back chamber ported into the front chamber?
Who said anything about a 6th? Before the video started it said “4th order build”
If you had 15inch subs dam that shit would of been hitting hard
It would only be like 1.5db more, but would need more box too!
👍👍👍...🔈🔈🔈💯🍻
👍🏿👍🏿👍🏿🔥🔥🔥🔥🔊🔊🔊🔊
Sure
I cant believe you spent that much time on plywood, with it's inconsistent rigidiositty. Why didn't you just use MDF (medim density fiber)? Rookie mistake. Pay more for noticeably better results. You have created "good", when it could have been "great" for a few dollars more.
If he used a high grade plywood, there should be very few to almost no gaps or voids.
Baltic birch plywood is a void free 13 layer ply. I believe weight wise, its very comparable to MDF while being more durable.
That said, i dont think he used baltic birch but it didn't look like it wasnt a bad quality.
Ummmm…… what?
Tell us you don’t know what you’re talking about without telling us you don’t know what you’re talking about!
(Granted THAT plywood, I don’t like to use)
Sounds like trash
Lol How the hell can you tell? It's a video! 😂
@dextermorgan1 there is not enough air volume for 4 12s so with that being said it's going to should like shit
@@dextermorgan1 and he used plywood
I've heard birch is the best for sub boxes?
100%!
Not “birch” from Home Depot (like he used in this) the hardwoods plywood at HD (and the like) is MDF core, can’t remember the other 4 layers and the thinnest veneer of whatever wood it says on the tag!
Baltic birch 3/4 plywood is all birch and is 13 layers (maybe 11, too lazy to look) and is also significantly lighter!