How To Make Low Cost RC Airplane. DIY Remote Control Model Plane
Вставка
- Опубліковано 17 лип 2024
- Making a mini and simple radio control model airplane with a mini brushless motor.
1306 Brusless Motor (CCW): s.click.aliexpress.com/e/_DdY...
12A Brushless ESC : s.click.aliexpress.com/e/_DBP...
4045 propellers: s.click.aliexpress.com/e/_DEI...
7.4V 600Mah or 800Mah LiPo battery (2S): www.banggood.com/custlink/vKD... OR shorturl.at/epy24
35-40mm Wheel: s.click.aliexpress.com/e/_DBK...
Control Horns: s.click.aliexpress.com/e/_DDC...
Radio control system (4 or 6 Ch): s.click.aliexpress.com/e/_Dkv... OR s.click.aliexpress.com/e/_Ddu... OR s.click.aliexpress.com/e/_DCP...
5gr micro servo: s.click.aliexpress.com/e/_DFO... OR 9gr servo: s.click.aliexpress.com/e/_DcI... OR s.click.aliexpress.com/e/_DEj...
Wheel stopper: s.click.aliexpress.com/e/_DCc...
Adjustable Linkage stopper (Easy Link): s.click.aliexpress.com/e/_Dkv...
Canopy Hatch Lock : s.click.aliexpress.com/e/_DE3...
Fiber Strips Adhesive Tape : s.click.aliexpress.com/e/_DlM...
3mm kraft foam board
3mm insulation foam
Lipo Battery Charger: s.click.aliexpress.com/e/_DF5... OR
s.click.aliexpress.com/e/_Dlw...
Hot melt Glue Gun: s.click.aliexpress.com/e/_DkC... OR
s.click.aliexpress.com/e/_DnD... OR s.click.aliexpress.com/e/_Dl2...
Diagrams : bit.ly/3cJVQYy
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
Technicial Specifications:
Lenght: 39.5 cm
Wing span: 48.6 cm
Flight weight: About 182 gr
Center of gravity: 3.75mm - 4.30mm from the front of the wing
Required control system: Min. 4 channels, 3 micro servos (5gr)
Suitable battery: 7.4V 600Mah - 800Mah Lipo battery
Suitable motor: 1306 Brushless Motor
Suitable propeller: 2 Blade 4x4.5 (4045)
Flight Time: About 7-8 minutes for 800mah LiPo
1306 Motor Mount STL File:
drive.google.com/file/d/1JdQu...
15mm Back Tire STL File:
drive.google.com/file/d/1Ym4q...
Back Rim STL File:
drive.google.com/file/d/1Kn1G...
#DiyAirplane #RCAirplane #BuildAirplane
00:00 Intro
00:06 Wing building
03:48 Aileron servo & aileron building
06:35 Fuselage building
07:24 Elevator building
09:23 Rudder building
10:49 Motor mount
12:58 Landing gear
14:45 Radio control servo connections
16:38 CG (Center of gravity)
16:43 Flight - Навчання та стиль
I have atleast watched this video for more than 10 times and feel satisfied
Simply I can double the scale to build a bigger RC plane.. Bigger is nicer and much more stable in the air, yet it makes stunning slow low fly by. I appreciate your RC passion and smart design.. Just keep going as we are following.
Your skills are appreciated. I have learned a lot from you. And I have a lot to learn from you. I have no words to appreciate your skills. My only wish is to be a talented youtuber like you.
Thank you for sharing this ❤
Thank you so much... I'm always make your stuff, by the way thanks for the 3D printed moter mount idea it helps a lot. 😊
Türkiye’de böyle çalışmaların daha fazla desteklenmesi gerek beğenelim, paylaşalım, bahsedelim.
teknofest ve tübitakın düzenlediği yarışmalar var
Thank you for helping me get through the pandemic with your D.I.Y vids♥️
you are amazing you have inspired me to build my own rc plane
hocam elleriniz dert görmesin, elinize sağlık çok müthiş olmuş.
awesome, and even beyond that: inspiring. Thank you so much
Yakın zamanda keşfettim sizi. Yaptığınız uçaklar gerçekten harika, ileride bende yapmak istiyorum. Her videoda, video anlatım kısmında yenilikler, iyileştirmeler görüyorum tebrik ederim. Çok iyi bir iş ortaya çıkarıyorsunuz. Saygılarımı sunarım, Teşekkürler.
Thanks 4 inspiring me to do something, right now I'm doing my own ju-87 sztuka RC
Your RC cargo plane is awesome. I am already in love with your servo stopper part of the cargo plane video! Can you please make a racing octocopter drone? Please... 🙏🙏🥺
4 kişi beğenmeyen acaba neye istinaden beğenmemişler çok merak ettim, daha iyisini yapın da görelim, eline sağlık usta yine bir muhteşem proje olmuş.👍
Good
Mad skills in building this plane not only that your videos are very easy to follow on spec so that one may go step-by-step and if they choose to make it larger they can do that as well providing that the centre of gravity is on spec. I truly enjoy watching your creativity go to work it's simply amazing there's not one thing that I don't enjoy when I settle down on the couch taking in every one of your builds.
PS Love the chicken crossing the landing strip lol
Finally after so much time you have uploaded a video, I LIKE YOUR VIDS A LOT SIR. Also i noticed a change in graphics with QnA and that's GR88
FROM INDIA
Türkiye'de takip ettiğim en faydalı kanallardan biri bu kanal inşallah sayıları artar
Cool! THX for tip. I gonna build this plane.
Very cool design bro.im going to use it to build mine from a broken helicopter.i have to skip the wing flaps but everything else I think I use to convert.thanks for sharing the video and design.
ÇOK GÜZEL
Thnk you.. for your video..very helpfull for beginners like me. 👍👍
Superb video. wait a minute. I have this exact flying field in RealFlight G7.5 Flight simulator. I practice flying helicopter on this field in Sim.
Beklediğimiz video geldi kaliteli ve mükemmel bir video için teşekkür ediyorum
Erşimi kolay malzemelerle öğretici bir video daha. Türkiye'nin gerçek diy kanalı KendinYap. Teşekkürler
Very good tutorial I really enjoy watching your videos.
Kral pistlerde döndü :) elinize sağlık...
Cooll!! Your video always motivate me to make something cool like this
Even if its fail...i still love to making like this
Love from India .....keep going....!!
Very Good!. Silvio, Recife Brasil.
thank you , nice one
Really good ideas and good work
This video is so helpful 👍👌😁🙏
Daha büyük projeler bekliyoruz👍
Good idia thanks.. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
It's easy to do only need is materials to do that
Yes
@@swanandb and i don't think Vancouver has those mats. for sale
Your videos are great :D I built your bigger version of this
Emeğinize sağlık . ucuz ama performans zirve.
How does he make it so perfectly.......even I hav tried it......it flies but not as good as his......good job 👍👍
Thanks. Good flying is not just about construction, it's about flight experience. I have been flying RC model airplanes for many years. (fuel models, electric models, etc.).
@@Kendin-Yap Hmmm...u r right....I am trying to make a rc plane with a old drone......And thanks for replying 😁😁
@@Kendin-Yap I got a lot of inspiration from u......thanks a LOT❤️❤️
it's a very good video and very helpful!!
That chicken run is hilarious 😁
Great stuff!!! Thanks for sharing. But I don't think the chicken got permission from the control tower to cross the runway.... :)
Haftalardır bildirim gelmesini bekliyordum ve geldi
Hii , you are a genius
Bro You Vere Smart Make Plane Vere Good For You❤️👍👍
gerçekten harika olmuş elinize sağlık
Emeğine sağlık çok güzel çalışma olmuş.
Gooooood Korean 구독 좋아요...알림설정..^^
Congratulations from Belgium 👍👍😉
oo usta piyasaya dönmüş
Reis kanalın çok güzel inşallah bir gün 10 milyon abonen olur :)
I have watch more that 120 times for make my plane
super hocam, bende şu an şevke geldim, çok yakında yapamaya çalışacağım :)
Abim eğer müsaitse birde arkadan motorlu bir başlangıç uçağı yapar mısın? Çünkü yere düşüşlerde motorun daha az hasar alması ve risk olmaması için eğer yapabilirsen şimdiden teşekkür ediyorum
Very interesting videos. Good plane variety. Why not helicopter now. Or bicopter. Here in Canada restrictions for drones. So we need something for indoor fun.
NICE VIDEO L WAIT FOR RC BOAT :^) :P
If i use a 5mm foamboard will it still perform well?
Çok güzel elinize sağlık
If anyone is planning to build this if you use a fs-ia6 the 12a wont be enougg because it only gives 1 amps for the reciever so go for the 20a 2a 5v esc
Nice video. Love watching your vids! Also, why did that chicken cross the road???🤣😂
Vary nice video 😊😊😊📸
5 dk sonra yazılım var yazılıya çalışmak yerine seni izliyorum 😄
Kolay gelsin
Neyse iyi geçti 95 100 bekliyorum 😄❤️
@Ahmet Faruk Türk 9
@@boylesoylerdio hangi okulda nerede okuyorsun. Ben elazig da Mehmet Koloğlu Anadolu lisesindeyim
@@EternalFireFan Aydın - Aydın lisesi
Çok güzel bir video olmuş ileride ki videolarında büyük modellerde yapar mısın başarılar
عمل جيد وجميل!
Blogcu uçağı yapmak ister misiniz, icatlarınız bizi şaşırtıyor, muazzam çabalarınız için teşekkür ederim
Helal güzel olmuş.
numa vig senden öğreniyor bu işleri abi, devam
👏👏👏
Harika iş. Hepinizi seviyorum.
Endonezya'lıyım.
Great job. Great video. I am very jealous, because there is no kraft foam board on Amazon any more., so I can not start to build my plane. Best Regards.
Thanks.. It is generally sold in shops and hobby shops that sell the necessary materials for architectural model making.
@@Kendin-Yap Thanks for reply. Maybe in your country, but here in Croatia I'm not able too find kraft foam. Best Regards
What will be the best thurst to weight ratio when making a rc plane? Do thurst overcome the weight to generate enough pull?
This value varies according to the style and purpose of the aircraft. Aerobatic model, speed model, sport model etc. is different for. For typical top wing sport-scale aircraft, the one-to-one ratio can be considered as a reference.
Çok iyi olmuş abi eline sağlık seni bekliyodum
Круто!!!
Cool bro
güzel iş güzel işç,lik
Telsiz ve röle yaparmısınız vidolarınız çok güzel elinize emgine saglık
That's cool
Can you make a rc jet plane with a modified brushless motor engine like EDF please,i wanna build that one,but i afraid if it cant fly😁🙏
You could have made this cute little baby a little earlier sir. Anyway u are awesome
çok güzel olmuş
eline sağlık
Ardupilot, pixhawk ya da benzeri uçuş kontrolcü kartlarıyla bir projeniz olacak mı acaba
Merhaba hocam. RC model ucak ile teraziye koyuyormusunuz
Very simple
Anlatım çok güzel, tabi ki video da
Thank you for your video. I was worried what to use coz I didn't have a Y-type servo extension.
If you have two servo extension cables, you can make a Y cable by connecting them parallel to each other.
@@Kendin-Yap
Thanks for the insight. That makes my work easier now😃
I think the channel for the rudder and the channel for the ailerons were switched. Otherwise, great vid
Thank you. It's a matter of hand habit. Anyone can use different.
Hey bro amazing build 🛐🔥
Question:- can I use normal bldc motor (like 2200kv or 1000kv )
Thanks. This is a small plane. So a small brushless motor like 1306 or 1307 is suitable. KV value is a different matter. It does not represent the power and dimensions of the motor.
can we just place a straight wing instead of an aerodynamic wing?
please reply
Yes it is possible. But performance will decrease. The straight wing does not have high efficiency.
Makes a plane with very cheap parts please and a tutorial of cheap control kkk
I speak from Brazil
Mükemmel ben de bu işe merak duyuyordum videolarını izleyip biraz işi kavrayıp yapmaya başlamayı düşünüyorum inşallah. Başlarsam yardımınızı isterim
Hey
Can i fit the wing at the top the fuselage?
abi uçak içi görüntüyüde gösterseydin kesşke hafif bir kamera katarak
Cool
Amazing
Waiting for long
❤️🙂
Is there any pdf plans so that it might be more useful.
You should try and make a rc plane out of that weird stuff they call balsa wood. It's pretty cheap and lasts longer than foam.
1:14 .. The main support of the wing in this plane is balsa wood.
hocam önünde ağır kamera taşıyabilicek bir uçak tasarlarmısınız
Hello! What size linkage stoppers and wheel collars are used for this plane?
There are links in the description section below the video.
@@Kendin-Yap Thanks! I was able to find these 4045 props in a local website. It looks a little different compared to the ones used above. Let me know if these would be suitable? www.amazon.in/gp/product/B08NZTFS3B/ref=ox_sc_act_title_1?smid=A2QB09PRKMYSQ0&psc=1
Nice
Hocam yine güzel bir uçak olmuş elinize sağlık. Bir sorum olacaktı. İniş takımında 1.2mm tel esneme yapmıyor mu ?
Bu çok hafif bir uçak (180 gr) ve iniş takımın yüksekliği çok az. Bu yüzden gayet stabil. 1.2mm fazlasıyla yeterli
@@Kendin-Yap Hocam ben karton bulamıyorum(. Bulduklarımında içi boş hep sizdeki karton gibi içinde beyazı yok. Nerden bula bilirim ?
@@reakt1v38 promodelhobby
@@reakt1v38 karton diye değil fotoblok diye aratın