My first building and flying an RC Trainer Airplane. Beginner RC plane Full build.
Вставка
- Опубліковано 10 гру 2022
- I wanted something under 250g. Easy to build and easy to fly. Suitable for beginner pilots. I know it is not the most incredible RC plane on the internet, but it flies pretty well.
Link to maiden flight: • My first building and ...
3-channel RC plane
Wingspan: 600mm
Length: 480mm
Flight weight of about 186g
Wing area: 10 dm2
Wing loading about 30 g/dm2
1306 Brushless Motor 3100KV or 4000KV (Weight: 12g)
12A Brushless ESC
3pcs Micro Servo Motor 3.7g
Propeller: 5045 CCW
7.4V 300Mahv - 450Mah LiPo battery 2S
5mm foam board
I want to share what I have built next with this power pack.
Chuck glider RC conversion wingspan 99cm.
• Moins cher, c'est pas ...
DIY Cessna RC airplane wingspan 97cm.
• DIY Cessna RC airplane - Спорт
now this is a real airplane, im watching all the videos and this is well done.
First time builder first time flyer I've been wanting to do this for years so now I'm going to try it
Looks good man. I learned to fly scratch building from Flite Test.
Thank you
,uy bueno. Saludos desde Canarias
Nice first build, flies great. With some experience, there's no end to what you can build with adams foam board. I've built a couple of 6S EDF jets. Lately, I've been watching Numa Vig and Julius Perdamo, both you tube channel names. Both are epic builders using depron/xps foam which is nicer than adam's, if you can get it.
Excellents designs, tank you for to share theres, greetings from mexico.😁
Thank you! Cheers!
Nice video! Thanks for including the demntions. Been out of rc for a while. I've always have done nitro
Well done, so much fun with basic stuff. Flying is great in this way. Thanks for sharing.
Thank you
Welcome to this fantastic hobby, and have luck with all your diy planes.
Thank you.
Cracking little video dude
Thanks
Están excelentes los diseños, muchas gracias por compartirlos, saludos desde México.😁
Looks really good! Do you share the plans? I just found it in the Video... 😎
Thanks 🙂
I finished my replica of your plane and got to try it this morning. I've never flown anything before so I was prepared for it to be all over in 5 seconds. Well it is actually pretty rugged because I got to launch it about 5 times before it hit a tree and the front skewer got ripped out.
I thought it would have plenty of power but it seemed to struggle a bit. It is possible the CG was off. Anyways, it was a lot of fun, even the crashes. Thanks again for sharing your plans.
Thank you. For more power 1406 2500kv motor with a 5.5inch propeller can be used.
@@simeonparvanov Ha! I just discovered I had my throttle curve set to max out at 50%. I had the profile set like that for my "wingless plane" (video on my channel) which had an overly powerful 2212 motor. Looking forward to trying again with full power but we have rainy weather ahead and I have a few repairs to do.
Dude this is awesome! I'm building a similar plane and posting the video soon. I'm using a lot of the same components but a hot wire cutter for the body.
Sounds great!
Looks outstanding. Any plans available? Thanks!
Thank you. You can find all the dimensions in the video.
Nice Bravo
Thank you.
First of all, thank you for the video. Thank you for your efforts.Is there any problem if we use 3mm foamboard ?
If it can be made from 3mm foamboard, should we also change the power and dimensions of the motor and propelle r? What should be the power of the engine and the size of the propeller ?
( I have a 3mm foamboard in my hand. I want to use it, that's why I'm asking.)
You can use a 3 mm foam board for the wing and you can double the side of the fuselage to keep it relatively durable.
Thank you for your reply.
Super 👍👍👍👍
Thank you
i have 2gram servo i can control in wing? 1servo 3,7 gram to control elevator , 2s 300mah battery, 5inch propeller, 12a esc?
That should be OK.
@@simeonparvanov thank you
Thanks for documenting this. I have started building this as my first RC plane. Questions about the thrust angle: did you just trim the fuselage a bit to get those angles? How did you arrive at those values?
Yes, it isn't easy to be precise at home without proper tools but Trust angles are recommended but not required and can be 0 degrees if that is easier for you. I just trimmed the fuselage a little bit.
Do you think it would still fly if it used rudder to turn instead of Alirons?
Yes. You can upgrade it to 4 channels and it will still fly.
i am not getting a 1306 motor , so can i use a 11XX or a 14XX motor?
14XX stator size, Motor weighs about 13g should be OK.
thank you
la velocidad de el motor es de 400kv o puede ser menor?, ´quizas con la marca de el motor podria encontarla gracias
The motor KV can be less. I used 3100kv or 4000kv both work OK.
Perfecto muchas gracias
hola amiga magnifico proyecto, pero tengo problemas con el motor, seria posible que me compartieras la marca del motor, o una imagen, gracias
Any brand will be OK. For example Emax 1306. I used 3100kv or 4000kv both work OK.
Perfecto muchas gracias
Sir, pls also share details of Radio controller use . 🙏
It's a Flysky radio which is a great starter radio set. I'd go for the Flysky FS-i6 as it's will bind to both their AFHDS and AFHDS 2A radio protocols
I do
what is thrust angle and can I use a 2200 MAH battery for the aeroplane
The thrust angle is 2 - 3 degrees. No, you can't use a 2200 MAH battery, the model is too small.
thank you and I mean what is the defination of thrust angle
@@himanthbv6003, you can watch this video from Flight Test ua-cam.com/video/c9dW9lOD96s/v-deo.html
thank you
can I use a 2500KV motor instead of a 4000 or 3100KV motor and all of the 400MAH lipo batteries are out of stock , so which one should I use ?
Why you are limit plane weight by 250g?
In the UK, you do not need to register if you only use a drone or model aircraft weighing below 250g.
@@simeonparvanov Thank you for answer.
I want the flight sir
You have lovely birds. I like them.
Hello. I own Gotta know joe's hobbies, welcome to our world. Reach out ill do my best to help you in your journey if you need Joe
Thank you
😂
No one builds with balsa wood anymore.
I am currently trying to build my first balsa wood RC plane kit. It is DW Hobby R03 STICK-06 wingspan 58cm
@@simeonparvanov You'll love it. Its a great construction material, very repairable, as much as or more than foamies.
Thank you
His is foam board, much easier and cheaper than balsa 🙂👍
@@colinstace1758 For quick-built, all straight and square models, foamboard is great.
I am in tamilnadu india
You can find all the necessary parts to build an RC plane on Amazon.