Good video, been using this method for years, three things that help, 1: if you can get the tire off the vehicle to clean it up and work on flat surface, 2: Apply some lubricant around the rim after cleaning, a little soapy water is good, or WD40 if you have nothing else, 3: wrap a ratchet strap around the tire and tighten it up, this helps to force the bead to the rim, finally once you start the compressor DON"T put your fingers anywhere near the bead as it can pop back on at any time, fingers caught in there will end up being a bad day.
I have a morrflate, and all the parts I need to make one of these. Really fantastic idea, plus thanks for the reminder to order a bag of valve cores! I have the Colby valves and really appreciate the peace of mind things like this offer for very little space or weight in my tiny jeep tj Great suggestion, thanks for the video
It's a MORRflate TenSix PSI Pro. They advertise 10.6 cfm / 300LPM. It's mostly the same compressor as the Tozalazz or the maxi trac, thors hammer... All the dual cylinder compressors that look the same are basically all the same hardware painted different colors, and have different options like air fitting, hose length, psi shutoff etc.
Thanks for sharing this. Stupid question: Why do you need to remove the valve core? If the tire chuck is depressing the core valve to allow air into the tire, then what difference does it make to remove the core altogether?
The Schrader valve (valve core) is an obstruction in the valve stem even when open. The trouble with rebeading a tire is if the tire against the wheel isn't perfectly sealed the air gets out past the tire, never allowing the build up of pressure to reseat the tire. So the more air you can get in the tire the easier the process. Think about drinking through a McDonald's straw, and through a coffee straw. So with the valve core removed you can move double or triple the air through the valve.
![Before You Use A High Lift Jack - [ Watch This ]](http://i.ytimg.com/vi/6dFpxDdcZqg/mqdefault.jpg)
Good video, been using this method for years, three things that help, 1: if you can get the tire off the vehicle to clean it up and work on flat surface, 2: Apply some lubricant around the rim after cleaning, a little soapy water is good, or WD40 if you have nothing else, 3: wrap a ratchet strap around the tire and tighten it up, this helps to force the bead to the rim, finally once you start the compressor DON"T put your fingers anywhere near the bead as it can pop back on at any time, fingers caught in there will end up being a bad day.
@@-PORK-CHOP- yup. Everything you say is on point. I'd also add once it starts to assure up, don't stop the compressor or you might lose it again...
Thanks for sharing. Great idea.
DUDE, GENIUS, GREAT JOB!!! 😃
I think genius might be a bit far, but I'll take it... 😉
good two minute video
I appreciate you watching both minutes!
Now add a rachet strap to go around the tire circumference so you don't have to hold it...
Nah. Was muddy. I ain't layin in the mud. Just use the fingertips to pull on the tire. Stay clean, drink Starbucks... 😂
I have a morrflate, and all the parts I need to make one of these. Really fantastic idea, plus thanks for the reminder to order a bag of valve cores! I have the Colby valves and really appreciate the peace of mind things like this offer for very little space or weight in my tiny jeep tj
Great suggestion, thanks for the video
We all carry hundreds of pounds of piece of mind! Thank you for watching, I always hope to be helpful...
Great video man!
Thank you...
Nice little tool! There is no proof I've ever done anything dangerous to re-bead a tire! LOL!
If "pics or it didn't happen", then there's no proof I did either! 😏
Great video man! Thanks for the S/O!
Of course homie... I gotta get to editing on all that video I brought home. Soooooooooo much video.
How to say "don't use an explosion" in 400 different ways.
@@parkinglotpatty2911 yup. I should have said it 401 times... 😁
How many CFM was that compressor? Sounds pretty loud.
It's a MORRflate TenSix PSI Pro. They advertise 10.6 cfm / 300LPM. It's mostly the same compressor as the Tozalazz or the maxi trac, thors hammer... All the dual cylinder compressors that look the same are basically all the same hardware painted different colors, and have different options like air fitting, hose length, psi shutoff etc.
Thanks for sharing this. Stupid question: Why do you need to remove the valve core? If the tire chuck is depressing the core valve to allow air into the tire, then what difference does it make to remove the core altogether?
the air quantity
The Schrader valve (valve core) is an obstruction in the valve stem even when open. The trouble with rebeading a tire is if the tire against the wheel isn't perfectly sealed the air gets out past the tire, never allowing the build up of pressure to reseat the tire. So the more air you can get in the tire the easier the process. Think about drinking through a McDonald's straw, and through a coffee straw. So with the valve core removed you can move double or triple the air through the valve.