Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
you don't need to press pull in 2 directions then use the subtract function. Instead just press pull twice using the same face in the same direction and it will create the void. I also don't know why you don't just hold shift and left click drag to rotate view.
i learnt a lot of new stuff in this tutorial but to be honest the sculpt command is garbage it doesn't work even though i do everything you did in the tutorial and i remade it 3 times and still doesn't work, i use the same version as you 2021
It will be helpful if you could provide detailed explanation on blend, patch and associativity to avoid anomalies like when converting to solid it shows not applicable check water weight volume.
Hii, Thank for the Tutorial, i facing one error can you help me sort it out. when i am using Sculpt Command it every time it gives me same error no water tight module fount. i am doing every thing step by step as per your tutorial and tried several time but still same error.
I'm new to cad. I'm living it, although very hard to learn on my own. Watching your videos teach alot, but in almost every single one that I've tried to do, at least one Thing does not work out on my end the way they do in yours. On this one, it would not let me blend lines to patch curves. Wasnt able to complete project once I reached that point.
Hello my extrude is not getting the same results rather after extruding and converting it to the shaded bit, only the curved edges are shaded and there is a massive hole inside
Yes there is. Don't delete the two solids. You can make the middle part drawing a rectangle and use the command Sweep with a 90 degree twist and after that use the align command to put it in its place.
@@Lia-g3dIn this chat window I find it difficult to know what is not understandable for you so I can try and help you. Ptobably the best would be check the posted video and pause after each command and study the used commands.
Great video....beautifully explained.....thanks. Why do you extrude the arc's rather than 'patching' as you did with the other splines? I found if I 'patch' the arcs, the 'sculpt' function didn't work. When I extruded the arcs (as you showed) the 'sculpt' function worked fine. Is there an explanation why this happens? Thanks again.....I will be watching more of your tutorials as you explain things so well.
Thank you for the great tutorial. Although I have a problem with mine. The side edges I patched has gaps in them and this prevents me from sculpting the surface into a solid. I don’t know what I’m doing wrong
Bonjour, est-ce que quelqu'un peut m'aider, please. Après avoir créé mes objets solids 3D en regardant la fenêtre des propriétés des objets je peux toujours modifier les dimensions qui sont affichées ou directement dans le modèle espace avec les poignées d'accrochage des objets. QUESTION pourquoi certains objets une fois modifiés je n'ai plus les poignées ni les dimensions affichées dans la fenêtre de propriété. COMMENT voir alors leur dimensions si on souhaite de nouveau les modifier ou s'accrocher pour les modifier ? Please help me please
Hi, can you please also show how can I get the dimensions on every part of this if possible. Just in case I want to fabricate similar to this model. Thank you.
I notice yor view is different . Your axis are setup different thatn when you start a new drawing and, you are not at hope position either. I think it's key to follow you as you are doing the drawing. Need to explain that part too.
Pas top ! Le mec te fait un tuto sur AutoCad et tu vois qu'il ne sait pas s'en servir. Ou, comment faire les choses simplement alors qu'on peut les compliquer à merveille !
i do literally exactly as this video does and when i try to sculpt it it tells me the object is not watertight, i have tried this over 4 times now and i cant figure it out. anyone know what might be causing this? thanks
Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
Great tutorial! I learned more in the 13 minutes of this video than in a 1 hour official autocad tutorial.
best autocad tutorial on whole of the UA-cam
very true
you don't need to press pull in 2 directions then use the subtract function. Instead just press pull twice using the same face in the same direction and it will create the void. I also don't know why you don't just hold shift and left click drag to rotate view.
beautiful tutorial, explained perfectly in every single step. compliments!
Another fantastic short educational tutorial...
Hey! When I try to sculpt it says "solid creation failed, no watertight volume detected." So what's the problem??!
Hi. Can you explain what i'm doing wrong?
When I use a SCULPT commend Autocad says:
Solid creation failed, no watertight volume detected.
Yaa i get same issues too 🙄
It's clear draw a water tight volume while working on the surface make sure to join the surface on each edges properly.
Thanks for video. Easy to follow.
thanks man. it took me a couple of times and a bunch of rewinds but i eventually got it. awesome video
Very nice video for Beginners... Keep it up sir..
Excellent video
i learnt a lot of new stuff in this tutorial but to be honest the sculpt command is garbage it doesn't work even though i do everything you did in the tutorial and i remade it 3 times and still doesn't work, i use the same version as you 2021
It will be helpful if you could provide detailed explanation on blend, patch and associativity to avoid anomalies like when converting to solid it shows not applicable check water weight volume.
Thank you for share your skill
Hii, Thank for the Tutorial, i facing one error can you help me sort it out.
when i am using Sculpt Command it every time it gives me same error
no water tight module fount.
i am doing every thing step by step as per your tutorial and tried several time but still same error.
I have same problem.
I'm new to cad. I'm living it, although very hard to learn on my own. Watching your videos teach alot, but in almost every single one that I've tried to do, at least one Thing does not work out on my end the way they do in yours. On this one, it would not let me blend lines to patch curves. Wasnt able to complete project once I reached that point.
Great tutorial, but my cad 2011 doesnt have a blend curves option.
thanks
thank u for tutorial.
i'm from indonesia
Dear sir make a complete video about project geometry in auto cad surface.. Pls pls plsss
Hello my extrude is not getting the same results rather after extruding and converting it to the shaded bit, only the curved edges are shaded and there is a massive hole inside
Nice explan
Very useful
Sir,why you selecting patch comments and why can't use extrude comments please explain it sir
iam having an issue "no waterweight volume detected" i've gone through my drawing 4-5 time but still it pertains
sir, please show the dimensions before making the drawing
Perfect. But I wonder if there is any other way to draw this object
Yes there is. Don't delete the two solids. You can make the middle part drawing a rectangle and use the command Sweep with a 90 degree twist and after that use the align command to put it in its place.
@@luanalidema hello, dear. Can you please help me with this? it's sound very easy to accomplish but somehow doesn't work for me.
@@Lia-g3dIn this chat window I find it difficult to know what is not understandable for you so I can try and help you. Ptobably the best would be check the posted video and pause after each command and study the used commands.
Cool but this would take 2 seconds in Fusion 360
Great video very easy to understand and complete. Thank you
Great video....beautifully explained.....thanks.
Why do you extrude the arc's rather than 'patching' as you did with the other splines?
I found if I 'patch' the arcs, the 'sculpt' function didn't work.
When I extruded the arcs (as you showed) the 'sculpt' function worked fine.
Is there an explanation why this happens?
Thanks again.....I will be watching more of your tutorials as you explain things so well.
i can't convert to solid sir , why ?
My AutoCAD version is 2013 but here SURFPATCH command is not working please explain other way....
Thank you for the great tutorial. Although I have a problem with mine. The side edges I patched has gaps in them and this prevents me from sculpting the surface into a solid. I don’t know what I’m doing wrong
Bonjour, est-ce que quelqu'un peut m'aider, please. Après avoir créé mes objets solids 3D en regardant la fenêtre des propriétés des objets je peux toujours modifier les dimensions qui sont affichées ou directement dans le modèle espace avec les poignées d'accrochage des objets. QUESTION pourquoi certains objets une fois modifiés je n'ai plus les poignées ni les dimensions affichées dans la fenêtre de propriété. COMMENT voir alors leur dimensions si on souhaite de nouveau les modifier ou s'accrocher pour les modifier ? Please help me please
Thank man - you doing too explaning movies
Hi, can you please also show how can I get the dimensions on every part of this if possible. Just in case I want to fabricate similar to this model. Thank you.
A great thing especially if you have Auto CAD in the 2021 version. I wonder if something like this could be done in AC ver.2007?
Break at two point is not happening
You could just use loft
loft is what i would use... straight forward, less steps and time efficient...
I notice yor view is different . Your axis are setup different thatn when you start a new drawing and, you are not at hope position either. I think it's key to follow you as you are doing the drawing. Need to explain that part too.
Nice explan
Sir fusion 360 k bhi tutorial lo na please
i need car design
Awesome teaching Sir
Can't convert to 3d solid... Please explain sir...
Pas top ! Le mec te fait un tuto sur AutoCad et tu vois qu'il ne sait pas s'en servir. Ou, comment faire les choses simplement alors qu'on peut les compliquer à merveille !
The way you are describing it's make video so comprehensive.
Thanks
I really like how you did that and the way you guide us how to do it... thank you 👍👍👍
very good tutorial
Use full video, Thanks...👍
Thanks for these videos very much. Good videos.
Thank you for the good tutorial
Very good explanation.
keep it up
nice sir, Very usefull , thank u
i do literally exactly as this video does and when i try to sculpt it it tells me the object is not watertight, i have tried this over 4 times now and i cant figure it out. anyone know what might be causing this? thanks
I had got problem as well. Could you please tell me solution? Thank you.
@@mevlog7555 i found it probably has something to do with double lines ontop of eachother. im not sure why or how to fix that tho.
Same problem as mine so i tried to use the patch tool only for the twisted part. For the rest, I use extrusion. Then boom! SCULP works.
zoom on the curves their is gap in between you have to fill it both side then it convert into sculpt
I had the same problem. I'm not sure why but once i rotated in a few times it then decided to work, I changed nothing though.
Thanks! Veery interesting
How would you add dimensions to this?
Taught me a lot! Thank you!
Fantastic
very nice sir.....
Wow ang galing naman!
Sir fusion 360 k bhi tutorial lo na
what the fuck is this '' @ '' there is no such command