AutoCAD 3D Loft Command Tutorial Complete | AutoCAD Loft Path | AutoCAD Loft Guides

AutoCAD 3D Loft Command Tutorial Complete | AutoCAD Loft Path | AutoCAD Loft Guides. This tutorial shows how to use loft command in AutoCAD step by step. All the loft command tool options such as path, cross section only and guides are covered. Shell command is used to create hollow part.

[@wf.d5076]

THIS WAS SUCH AN EXCELLENT GUIDE

[@CADCAMTutorials]

Thank you 😊❤️

[@bluetorch13]

English not being your primary language makes your explanations SUPER EASY to understand, English is also my secondary language and all your tutorials are excellent and simple! Thank you very much!

[@wamanwell-being2470]

I want to thank you sir from bottom of my heart....
It's because of you today I'm working in design in a Defence Company....

[@CADCAMTutorials]

You are welcome

[@yashgautam4874]

Where are you working brother

[@martinsomers8730]

@@yashgautam4874 In a Defence Company....

[@dhanalakshmiramamoorthy4824]

Tell name of the company

[@simpernchong]

I have used AutoCAD for more than 2 decades. Nice to see it still going strong.

[@mohamadzfr]

Such a great tutor 👍
Thank you so much broader 🙌

[@nipambarman3221]

This is so amazing that how u teach these tutorials in an easy way. ❤️

[@CADCAMTutorials]

Thank you

[@Fededilollo]

You deserve a medal, thanks.

[@CADCAMTutorials]

You are welcome

[@nazikmohamed]

Good Example for using loft command in solidworks,Thank you

[@rocky8004]

Superb teaching sir ji

[@chunkynugget]

Great video! Explained really well.

[@kovabhuma]

Explanation is very clearly thank you so much 😊

[@shanisahani2284]

great teaching n skills of autocad ...😍

[@edmondo.6004]

Good & amazing tutorial. Thank you so much!

[@CADCAMTutorials]

You are welcome

[@claudiajanzen2564]

Thank you sir, your tutorials are easy and straight to the point! Now I'm a fan of this channel! =)

[@CADCAMTutorials]

You're welcome 😊

[@balaramkona4717]

nice explaining sir thanks for supporting poor people like me,. we don't have to pay more amounts for training - i can start learning from your videos

[@CADCAMTutorials]

You're welcome 😊

[@EngineerWaelAhmed]

جزاك الله خير ياخوي
شرح سهل وسريع وسلس

[@josephsegador641]

thank you for this video and its very appreciated to me for easy way

[@dinogart2979]

Thank you very much sir, I'm from Indonesia

[@chandrakantjoshi.449]

3D Loft command is explained in very simple method.👌👌👍

[@CADCAMTutorials]

Thank you 😊. Please subscribe to get new video notificatio.

[@paulocintra7941]

Muito bom !Bem explicado, excelente exemplo de aplicação , ótima explanação e conclusão.Felicidades a todos .

[@rowanmurphy5239]

Incredible! You may have saved a project of mine that was defeating me!

[@CADCAMTutorials]

Glad I could help!

[@sajjad3865]

You are best my teacher!

[@CADCAMTutorials]

Thank you

[@ALAMKHAN-ky4ef]

Bahut khub ❤️

[@CADCAMTutorials]

Thank you 😊

[@robertopascazi228]

EXCELENT!!!! Thanks a lot.

[@CADCAMTutorials]

You're welcome 😊

[@veeramareddisravani9743]

Perfect explanation and thank u

[@CADCAMTutorials]

You're welcome 😊

[@alicaliskan1685]

Thank you very much...

[@sadicoutinho581]

Muito boa aula continua assim Deus t abencoe

[@CADCAMTutorials]

Claro, obrigado

[@shumailkhan6078]

Very helpful 👍

[@iktita]

good one my friend

[@carloscorreia7700]

when is good, is good!! TK

[@ayzrock]

thanks for the tutorial!!

[@CADCAMTutorials]

You're welcome 😊

[@purestress2597]

Pretty clever tool.

[@squirrelspown]

wow thank you
great tutorial

[@CADCAMTutorials]

You're welcome 😊

[@melvinhampton9029]

Very well young man

[@CADCAMTutorials]

Thank you.

[@waiyanlinn8573]

Thank you , sir

[@mdfaiyazuddin7738]

Raj Sir it reminds me of your class in the very beginning

[@andrei9115]

Yeah sure! It looks so easy when you master are doing it but in practice is much more difficult when it comes to spline! Loft command is maybe the easiest and most straightforward 3d command but when you have to extrude or loft on a path is very difficult when you have to change the XY plane in space. I found the easiest method to be the new ucs, then select x and y axis according to the plan you want to draw into because this way you will have only two axis to look after and dont have to pay attention to the z axis, using left, right, front, back...etc looks much more difficult to me! I am just a beginner in AUTOCAD btw and the extrude/sweep along a path seemed the most difficult thing to me so far! Nevertheless you are a genious! Can I email you a 2d plan building which made my Autocad crash in 2 versions (2017 and 2021) when I tried to press pull the windows? I've tried it on my desktop as well and autocad froze again, the drawing is pretty simple with only 4 rooms, I dont know why Autocad is acting like this. Maybe you can help me figure it out. Thanks alot in advance! Keep up with the good work!!

[@haidartaher17]

May be it's too late as a response, but I think you to make sure that all the 2d drawing areas are fully closed using boundary command, then make sure that z axis is in extrude direction using ucs command.

[@richiekong6843]

Thank you ❤❤❤

[@bb8219]

Ty❤❤❤

[@nihalyusifova1582]

Excellent thanks 🙂

[@CADCAMTutorials]

You're welcome 😊

[@Yavuz866]

Thank you a lot !!!

[@CADCAMTutorials]

You are welcome 😊

[@RajeshKumar-yh4dq]

Please make more videos in solidworks and catia

[@frarukabdulla7699]

Superb 👌👌👌

[@agnwstos2222]

Perfect. Helpful

[@CADCAMTutorials]

Thank you 😊

[@shreekatte]

Sir when i give path the line which is created by loft erases out. May I know why?

[@rayansaab968]

good keep going

[@Gustav_S_eyes]

Thank you 🙏🙏

[@calciomercato_news]

Gooooood... From Italy

[@CADCAMTutorials]

Thank you 😊. Please subscribe to get new video notification.

[@nma6813]

Thanks to much

[@RameshSoni-cq7gm]

Thanks

[@omarcornette7999]

thank you so much

[@CADCAMTutorials]

You're welcome 😊

[@gussindra9378]

Good illustration

[@truemessage7069]

thanks

[@mech0797]

Bro please make videos about CNC simulation

[@babaymukherjee3119]

Thanks sir 🙏

[@CADCAMTutorials]

You're welcome 😊

[@malemalevich2672]

Ору с этого акцента. Индусы - топ!

[@vijaysinhchauhan8696]

Tanks

[@bigcaschrisannsolsona2236]

Thankyouuu 😊

[@CADCAMTutorials]

You're welcome 😊

[@lach0125]

great video

[@CADCAMTutorials]

Thank you 😊

[@vasudeokatdare6530]

Good !!

[@CADCAMTutorials]

Thank you

[@mrnomore]

Thanx. is there no Twist for Loft?

[@joaohenriquevolpinimattos5117]

How to control the surface density in LOFT command ?

[@blacknote5022]

Good

[@Squalettoblu75]

eccellente

[@CADCAMTutorials]

+Squaletto blu Thank you

[@nakiryajustine3841]

I SOMEHOW FAILED ON THE SHELL COMMAND. BUT I HOPE FOR THE BEST AS I PRACTICE MORE

[@shrikantbidgar7132]

Wow

[@CADCAMTutorials]

Thank you

[@samiranjana2083]

can you tell me sir why, I cannot make object like you ,it is showing--" The selected entities are not valid, "

[@NicolaeComan]

I cannot do command LOFT over a path. It appears "Selected entities are not valid." What is wrong?

[@NicolaeComan]

Oh, I see! I've forgotten to JOIN the portions of the path.

[@christopherbrown5338]

As the rest of the world is using parametric software

[@deaftodd]

Which windows version are you using?

[@CADCAMTutorials]

Windows 7

[@jeaacuesta5063]

Why mine doesn't have shadow when I used loft command

[@habibacil7716]

Hi, How do you join or unite 3D array with 3D solid object?

[@CADCAMTutorials]

Use UNION command

[@habibacil7716]

@@CADCAMTutorials does not work, I tried union, join but nothing. it says "at 2 solids, surfaces, coplanar regions must be selected"

[@CADCAMTutorials]

Explode 3D array and Union

[@habibacil7716]

@@CADCAMTutorials sorry to bother you but still it does not work. is there any other way?

[@amarkant268]

5:00 after selecting path it say not valid.. What should i do now

[@CADCAMTutorials]

Don't use very complicated path

[@debedabkilen2786]

path and guides doesnt work for me. btw im using 2012 version

[@CADCAMTutorials]

Try to create less complicated path and smaller section.

[@dodouniquelife9725]

How to Find These Volumes???

[@Loveanimals193]

Can you l
Teach me AutoCAD ?

[@sahilchhapola1125]

sir esme jo rectangular lofted part h uska devlopment kese bnega

[@CADCAMTutorials]

Uskeliye aap ko solidworks ya phir dusara 3D software use karna padega
ua-cam.com/video/AfpXTTi0R7U/v-deo.html

[@sahilchhapola1125]

@@CADCAMTutorials sir two step lofted and only rectangular shape not circle

[@mistervictor9078]

ГОСПОДИ ХРАНИ ИНДУСОВ

[@aminsaputra7134]

CONTOLL

[@arielsharon8694]

Thanks

[@CADCAMTutorials]

You are welcome

[@bhuvaneshd7143]

Thanks