Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
Challenge 😎 --------------------- 🗣️ Can you draw a circle using rectangle command in the AutoCAD? You Don't know?😱 Go now and Watch this video how to draw a circle using rectangle command. ua-cam.com/video/2E1LVYNu0f0/v-deo.html
Thank you so much bro, you are a saviour 🥺 !!! I was tired searching for how to remove that intersecting part of one pipe inside another pipe. But I didn't have any idea that it is done through slicing process, and luckily I found your video. Now, I can complete my project bcoz of u. ❤
Its a cool vid. In the beginning you say the units don't matter and use the "default" however everyone's computer isn't set up the same. I opened Autocad and spent 15 mins trying to get past the first line because it went so far off the drawing surface that I couldn't see it or scroll out far enough (because it was 150 'units'). Maybe if we had started with setting up the units I could have made it through more than 1:06 of the video. Sucks because I really need the 3D practice. Thanks for sharing your knowledge. I will check out one of your other ones and see if I can follow it.
Hi. I can't do the copy(7:30) like you . When I see Z axis and type 138, it gives me wrong result. I had to activate Ortho mode to get there. Can you tell me why ?
I would say You are a great guy and your videos are rich with knowledge n techniques so THANK YOU SO MUCH for your efforts and Always I look for your videos Thanks again
Thank you so so so much.... I just needed the idea of creating a surface to slice two intersecting cones. I learnt so many things just from this video. I am modelling my project in abaqus and the modelling environment is so unnecessarily complex. Hence I need to use a more friendly software like autocad 3D before exporting and analysing. I am glad to have seen your video. Thanks Again!!!!
Challenge 😎 --------------------- 🗣️ Can you draw a circle using rectangle command in the AutoCAD? You Don't know?😱 Go now and Watch this video how to draw a circle using rectangle command. ua-cam.com/video/2E1LVYNu0f0/v-deo.html
sir thanks a lot for this tutorial videos..it helps me a lot in developing my drawing skills..hope to see more tutorials from you.more power to you sir..
Thank you Sir, excellent training video. This really helped me understand how to orientate the UCS and develop geometry relevant to an obect and also how to trim intersecting hollow objects. Suscribed😁
Its a great pleasure to have you on UA-cam, but am new to 3D Modelling, can you please share with me those very first tutorials for beginners like may be the introduction to 2D or 3D Modelling. Thanks.
I have completed this figure on CAD 2021 and it actually worked, though I had to go back many times to his given command. A lot of the commands he did is errorneous in the new version of the program.
Hey Jay, Why didn't you went for solid extrude from start. You started with surface extrude then thickened it. If I start from solid extrude from beginning of drawing, will it matter or it will be same thing ???
Sir..i have a problem with my autocad software..its the 2010 version..the problem is i cant find all the toolbars on the home tab such as surface toolbar,parametric toolbar and also not able to see the View Cube on 3d wireframe ...also not able to see the Drawing number ,view names on the left top corner ..facing alot problems..kindly respond with the solution.
Thankyou, you for another excellent u tube video. Could you please include the 2D drawing for your followers to practice. Do you have any plan to do Revit tutorials in the future, because CAD gradually will be replaced by Revit. Keep up the good work and god bless you.
Please should have added dimensions to the actual drawings for it to be simple for us... Also try change the to vertical so that you can draw at one side and the image at the other side too...
Hello, I am not able to trim the 3 circles in the last object. When I select trim and enter the arcs are not marked and trimmed. What could be the reason? Thank,
Hi Jay. Thank you for the help. I had a few issues. when I extruded the circles at the beginning, they came out as solid cylinders and thicken didn't work on them. I also had problems with slice.
What if you already have a piece and you want to make another piece like it is That any easier please come it back in let me know and I only speak English
having issues with the tangent lines after creating them and I select trim all 3 circles become highlighted and it selects the polar array and does not let me trim
Easy to follow, BUT, after selecting the second 'Extrude' command and pulling the circle to the line, I have a problem. probably simple but the shaded command shows me two separate tubes, which are not connected as shown here. I have tried it numerous times but can't get it to connect. WHY? Thank you for any useful comments.
Hi Jay, i want to ask, when i select slice comand then after choose solid after that i have a problem when i want to select surface then will be erased it can't be selected
hi!, at the minute 13.09 i do exactly what you do to trim the circle lines, but, nothing happens..just a message "the object was not processed by trim"... what can i do?..i will apreciate your support.
Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
Challenge 😎
---------------------
🗣️ Can you draw a circle using rectangle command in the AutoCAD?
You Don't know?😱
Go now and Watch this video how to draw a circle using rectangle command.
ua-cam.com/video/2E1LVYNu0f0/v-deo.html
O.M.G, Most satisfying video explanation. Good work big brother it really gives the light to ones knowledge.
you are the best ,with all the AutoCAD video I watched in you tube ,yours's is the most easiest to follow and to learn AutoCAD
Thank you so much bro, you are a saviour 🥺 !!! I was tired searching for how to remove that intersecting part of one pipe inside another pipe. But I didn't have any idea that it is done through slicing process, and luckily I found your video. Now, I can complete my project bcoz of u. ❤
Excellent! I will recommend your channel to everyone who will desire to learn AutoCAD. In Shaa ALLAH.
Cannot believe how easy this was. You know how to tutor. Thank you very much. I subscribed.
Thanks Johann
Its a cool vid. In the beginning you say the units don't matter and use the "default" however everyone's computer isn't set up the same. I opened Autocad and spent 15 mins trying to get past the first line because it went so far off the drawing surface that I couldn't see it or scroll out far enough (because it was 150 'units'). Maybe if we had started with setting up the units I could have made it through more than 1:06 of the video. Sucks because I really need the 3D practice. Thanks for sharing your knowledge. I will check out one of your other ones and see if I can follow it.
how nice it is..... thank you coz through this I was able to get more techniques and learn a lot...God bless you always!!!!!
Hi. I can't do the copy(7:30) like you . When I see Z axis and type 138, it gives me wrong result. I had to activate Ortho mode to get there. Can you tell me why ?
You are an absolute legend, this is exactly what I needed to know. Thank you!
I would say You are a great guy and your videos are rich with knowledge n techniques so THANK YOU SO MUCH for your efforts and Always I look for your videos
Thanks again
good
Great tutorial and I'm looking forward to learning more 3D.
very nice, I would like to learn much more mainly about all modify tools & commands in easy way to use
You guys are the best, just keep on with the good work. We love your engineering knowledge, thanks.
The most simple tutorial i watched ..👍👍👍👍Thanx a lot
Thank you so much and shall practice all the 3D video you made it. Wish you be more and more successful🤩
Most helpful cad video I have seen, thank you for making it! You are providing a great service.
thanks sir, I am a beginner in this field ,very useful and your video give me a confidence
Very clear instructions, just what I was looking for to start with.
initially I took more time to understand this slice cmmnd. finally I've learned.but I won't be forgotten. thanks bro.
Thank you so so so much.... I just needed the idea of creating a surface to slice two intersecting cones. I learnt so many things just from this video. I am modelling my project in abaqus and the modelling environment is so unnecessarily complex. Hence I need to use a more friendly software like autocad 3D before exporting and analysing. I am glad to have seen your video. Thanks Again!!!!
Thanks a lot! This will be my final work for school.
Challenge 😎
---------------------
🗣️ Can you draw a circle using rectangle command in the AutoCAD?
You Don't know?😱
Go now and Watch this video how to draw a circle using rectangle command.
ua-cam.com/video/2E1LVYNu0f0/v-deo.html
Hi Jay, another master class from the master CAD himself. Look forward to more tutorials in both 3D and 2D.
Thanks Songoku :)
Excelent this video!.. this was my first drawing in autocad i was able to do. Thank you!
It is very helpful for learner please update more video s thanks for your clear explanation
Wow, it is amazing what you have done in such a short time here...
Thanks for the video, helped me alot.
I'm new to 3D designing in CAD.
sir thanks a lot for this tutorial videos..it helps me a lot in developing my drawing skills..hope to see more tutorials from you.more power to you sir..
When I use prespull for circles at 6.59 min it becomes totally solid but in your video it Hollow
What I'm missing
Thank u again,, each video is very useful& clear
Thank you Sir, excellent training video.
This really helped me understand how to orientate the UCS and develop geometry relevant to an obect and also how to trim intersecting hollow objects.
Suscribed😁
Thank you for explaining, GBU
Sir,This is the very good video and very useful to all.Please send more videos of new one .Thanking you sir
Thanks Vinayak. I will try to increase the frequency of uploads on SourceCAD.
You are the best, I love your voice
such a lovely video.. Understood clearly
please increase the volume friend, thank you for the excellent tutorial though
Where did that concentric circle came from? @14:10 , can u explain how!!? Other than that everything went good
Start watching from 13:38, two geometries with different radii of internal circles are making that final concentric circle.
Its a great pleasure to have you on UA-cam, but am new to 3D Modelling, can you please share with me those very first tutorials for beginners like may be the introduction to 2D or 3D Modelling. Thanks.
I have never gotten beyone 5:55 where the second slice is performed. It keeps failing. Can you postulate what may be happening? Thank you!
Thank you, bro, you are the genius
The last triangle 📐 doesn't fix exactly on the right pipe , it fix in straight way. Where as in diagram it fix perfect(tilt manner)
Very clear instructions. It is great! Thanks
Some videos of typical model here:
ua-cam.com/video/-XfBeywzl-0/v-deo.html
I'm happy to see your tutorial. Thanks to do this type of project. and make us another video.
4:37 sir have not any " enter" option when. Right click
What i do for ?
The best of all 3D concerning Coordinate systems , handling views and dealing with the slice command; actually it is a package 3D tutorial.
quite fast for beginner like me, but im amazed how u operate all the commands.
Great Tutorial bhai.
when I try to extrude I only have a solid solid option, no circle, I have selection cycling turned on
Sir,This is very good video .Please send more videos of new one .Thanking you sir
Very nicely explained - thanks a lot.
I have completed this figure on CAD 2021 and it actually worked, though I had to go back many times to his given command. A lot of the commands he did is errorneous in the new version of the program.
13:04 if you can't trim arrayed circles, first explode them
At 5:07 i cannot slice. Slice failed for selected solid.
Hi.Its been very long time waiting for your video. Your videos are very useful and very good.
Very well explained, thank you for sharing your knowledge.
It was really helpful...thank you verymuch
Nice work. Good tutorial!
Hi, thanks for the tutorial video, it is really helpful for beginners like me!
in CAD 2020 ther is no "SLICE" botten. please help. 4:50
Great tutorial, thanks. How do you get the steering wheel to remain visible and as displayed in this video?
triangle type flange edge is not aligned to the main pipe axis. please show that also to adjust.
@4:41 i selecting circle but the hole dissappearing. I m doing everything right in the video. What is wrong im doing?
select extrude command> get the mouse pointer over the surface and click CTRL key and move the mouse over the surface
Hey Jay,
Why didn't you went for solid extrude from start. You started with surface extrude then thickened it. If I start from solid extrude from beginning of drawing, will it matter or it will be same thing ???
cannot select the second surface to slice. Know why?
very good work >> txs..
Thanks Mohammed
Hi! I love the video but I just hope you could explain more on WHY you are using so-and-so functions. THX:)
I just can't get surface trim and slice to work for me. Do you have someone I can message you some pictures so you can see what I'm talking about?
The polar tracking doesn't work for me. Any ideas how to turn that function on?
Thank you so much and GOD bless
Can i change color after draw?? Or do I need to set it at the beginning..?]
Hello I have followed this tutorial extensively but whenever I get to the point of slicing it wont let me and it keeps saying no surface selected
Before slicing whhen i am going to extrude i am getting no option to extrude the circle...there is only one command i.e. 3d solid...what to do
I can’t extrude and trim the rectangle one
Sir..i have a problem with my autocad software..its the 2010 version..the problem is i cant find all the toolbars on the home tab such as surface toolbar,parametric toolbar and also not able to see the View Cube on 3d wireframe ...also not able to see the Drawing number ,view names on the left top corner ..facing alot problems..kindly respond with the solution.
Thankyou, you for another excellent u tube video. Could you please include the 2D drawing for your followers to practice. Do you have any plan to do Revit tutorials in the future, because CAD gradually will be replaced by Revit. Keep up the good work and god bless you.
I have a problem with the copy step… Tried everything but my component cant align with the z-axis😭helpp
Please should have added dimensions to the actual drawings for it to be simple for us... Also try change the to vertical so that you can draw at one side and the image at the other side too...
veri god veri najs
Hello, I am not able to trim the 3 circles in the last object. When I select trim and enter the arcs are not marked and trimmed. What could be the reason?
Thank,
AWESOME TUTORIAL !!!!!!
Hi Jay. Thank you for the help. I had a few issues. when I extruded the circles at the beginning, they came out as solid cylinders and thicken didn't work on them. I also had problems with slice.
have you switched to surface tab before selecting the extrude tool?
Hi Jay, I didn't go to surface previously. Thank you.
Welcome Chris
Hi, while trying to copy and paste along the z axis I found I couldn't input the length, it just kept showing 0.0000
very nice tutorial
very good tutorial , thanks
is there any payment method other than paypal? i want to get a certificate but i dont have a credit card linked on my paypal.
what is the diffirence between press pull command and extrusion command?
That was wonderful, I like it
What if you already have a piece and you want to make another piece like it is That any easier please come it back in let me know and I only speak English
Cant select the inner circle to extrude.
There is no option coming after selecting a circle for extruding circle
Most Satisfying video.
I can't select the surface
My filet edge curves into the solid instead of outside of it. Is there a way to reverse the direction of the filet?
PLS make sure the pieces are joined -union command- and use filletedge in the solid tab. good luck
Sir pls upload a video for pipe branches..
having issues with the tangent lines after creating them and I select trim all 3 circles become highlighted and it selects the polar array and does not let me trim
explode the array before using trim command. You can explode by selecting the array then type X on the command line and press enter.
got it thanks
For some reason I got the last instruction but now when I go to move the created fixture to the end point it seats at an angle and not flush?
@@sourcecad thank you! was stuck on this bit for over 30 mins before i found your advice
this size cm or mm pls tell me
Easy to follow, BUT, after selecting the second 'Extrude' command and pulling the circle to the line, I have a problem. probably simple but the shaded command shows me two separate tubes, which are not connected as shown here. I have tried it numerous times but can't get it to connect. WHY? Thank you for any useful comments.
Hi Arnold, without any screenshot, it will be difficult for me to tell the exact reason.
Hi Jay, i want to ask, when i select slice comand then after choose solid after that i have a problem when i want to select surface then will be erased it can't be selected
sorry for my bad english
Sorry Altaf I am not able to find the exact issue you are facing with the drawing, can you share a snapshot if possible?
hi!, at the minute 13.09 i do exactly what you do to trim the circle lines, but, nothing happens..just a message "the object was not processed by trim"... what can i do?..i will apreciate your support.
Better useful of *mirror* commond *Copy* space
B. Cause copy commond in always dimension take it